Too much or too little humidity

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
moondoggy
Posts: 86
Joined: Tue Jan 24, 2012 9:20 am

Too much or too little humidity

Post by moondoggy » Tue Mar 06, 2012 8:55 pm

I'm wondering if someone can give me some advice? I have a Resmed S9 Autoset. When using my system there have been nights that I have gone to bed and felt like my nasal passages have been blocked. Other times it's been OK. My system is preset to 80 degrees termperature and someone suggested that I should up the temperature from 80 to 83. The first night or two I was OK but now feel a bit conjested which could be unrelated or caused by me increasing the temperature. Can anyone shed any light on whether there is a cause/effect relationship here?

User avatar
archangle
Posts: 9293
Joined: Sun Mar 27, 2011 11:55 am

Re: Too much or too little humidity

Post by archangle » Tue Mar 06, 2012 10:19 pm

Humidity is trial and error. Try changing it.

With some people, higher is better, for others, lower is better. There's no one answer.

_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Also SleepyHead, PRS1 Auto, Respironics Auto M series, Legacy Auto, and Legacy Plus
Please enter your equipment in your profile so we can help you.
Click here for information on the most common alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check for yourself.

Useful Links.

ems
Posts: 2757
Joined: Fri Jul 29, 2011 12:46 am

Re: Too much or too little humidity

Post by ems » Tue Mar 06, 2012 11:02 pm

archangle wrote:Humidity is trial and error. Try changing it.

With some people, higher is better, for others, lower is better. There's no one answer.

Yes, I agree. I started with 3.5 and now have it set to 2.5. It depends on the temp in your bedroom.
If only the folks with sawdust for brains were as sweet and obliging and innocent as The Scarecrow! ~a friend~

User avatar
Quality Zees
Posts: 19
Joined: Sat Feb 25, 2012 1:17 pm

Re: Too much or too little humidity

Post by Quality Zees » Wed Mar 07, 2012 11:05 am

I live in Inland Southern California. Sometimes, especially in the winter when the wind sweeps in from the desert (the famous Santa Ana winds), the humidity is very low. Right now it’s 18 percent. A couple of days ago, I checked at midday and it was 7%! For me, I have to keep track of the humidity and adjust accordingly.

I must have a humidifier. Without one or with one set at too-low a temperature, my sinuses dry out and crack, causing severe sneezing and a runny nose for a day to a few days. It’s miserable. For me, I never have too much humidity as long as I avoid rainout. I know that's not the case for everyone.

I use saline nasal spray when I first get up and before I go to bed to moisturize my sinuses. I use it sometimes during the day in especially dry times like now. I know there is a saline gel called Ayr available also that people use, but I haven’t tried it yet.

I wish they made a tube with a sensor near the mask; the sensor could measure the humidity and make adjustments to the water chamber temperature accordingly to keep the humidity that enters the mask more constant.

Has anyone ever heard of or have such a device?

_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear
Additional Comments: Use Breathe Rite strips every night. Use F&P InfoSmart software. Icon has Thermosmart heated tube.

User avatar
Pugsy
Posts: 65022
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: Too much or too little humidity

Post by Pugsy » Wed Mar 07, 2012 6:43 pm

Quality Zees wrote:Has anyone ever heard of or have such a device?
They are getting real close with the new machines that have the heated hose and humidifier settings.
https://www.cpap.com/cpap-machine/pr-sy ... -tube.html
""Use the on-screen menu to select one of three available levels of relative humidity (70, 80 or 90 percent). Next, adjust the control dial to choose from 5 levels of heated tube temperature, ranging from 4 to 16 degrees above room temperature. The optimum humidification level at the mask is easy to maintain when using the PR System One REMStar 60 Series Auto CPAP with humidification assembly. ""

Looks like it is a bit more customizable than the ResMed S9 ClimateLine heated hose settings.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.