S9 Still Noisy

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
SMenasco
Posts: 317
Joined: Wed Oct 20, 2010 1:38 pm
Location: Oklahoma

S9 Still Noisy

Post by SMenasco » Sun Nov 27, 2011 12:15 pm

I had posted earlier regarding a noise from my new S9, happening at the conclusion of each exhalation. It has never stopped doing this during the 30 days I have used it. I have tried the machine changing every function and variation listed on the clinical menu, to no avail. It is now making a two tier noise (bleep-bleep) like two musical notes; G and A for you musical types. To me, it sounds like some type of flapper valve operation in the air delivery circuit. If I exhale strong, the notes are longer in duration. It only starts this after a period of time, like 20 to 30 minutes. If I turn the machine off, waiting 30 seconds then turning it back on, it will be just fine until 30 minutes or so later. I have also turned off the auto humidifier, put on the standard hose, completely removed the humidifier, changing masks, trying it after each change, no help. This unit is a new replacement by the DME for the first machine, and it performs the same. The noise does not wake me up as it did previously. However, if I wake up, and it starts, I can't go back to sleep, so I turn it off momentarily. The DME doesn't have a clue. I e-mailed ResMed three days ago. No reply yet. Possibly held up by the weekend. It seems to start after the machine settles out, after I go to sleep and the pressures are stabilized. I don't know this for sure, just guessing. This thing is trolling for a job lining the dumster. Has anyone else experienced this? Thanks.

Mary Z
Posts: 1493
Joined: Wed Oct 28, 2009 9:55 am

Re: S9 Still Noisy

Post by Mary Z » Sun Nov 27, 2011 1:43 pm

Call the DME and exchange it as faulty. It shouldn't be making those noises and you shouldn't change machine settings because of noise.

_________________
Mask: Wisp Nasal CPAP Mask with Headgear - Fit Pack
Additional Comments: PR System One Remstar BiPap Auto AS Advanced.
Dog is my copilot

SMenasco
Posts: 317
Joined: Wed Oct 20, 2010 1:38 pm
Location: Oklahoma

Re: S9 Still Noisy

Post by SMenasco » Sun Nov 27, 2011 1:59 pm

The changes were not made because of the noise. The changes were made to determine if the noise was occuring in a particular mode. It's called problem host isolation and identification, or trouble shooting. Thanks for the advice.

Bayrat
Posts: 27
Joined: Sun Sep 18, 2011 3:51 pm
Location: Upstate NY

Re: S9 Still Noisy

Post by Bayrat » Sun Nov 27, 2011 4:48 pm

I have a new S9 Elite and it does make a slight noise when you breath out, not a loud noise, but you can hear it. The machine is so quiet otherwise I figured it was normal and most likely a valve of some sort relieving pressure upon exhale. Perhaps I should have mine replaced too?

SMenasco
Posts: 317
Joined: Wed Oct 20, 2010 1:38 pm
Location: Oklahoma

Re: S9 Still Noisy

Post by SMenasco » Sun Nov 27, 2011 6:35 pm

Bayrat, I think a replacement will probably make the same noise. This one is a replacement for the first one I obtained, a month ago. I am coming to the conclusion that it is a design noise and I will have to live with it.

Bayrat
Posts: 27
Joined: Sun Sep 18, 2011 3:51 pm
Location: Upstate NY

Re: S9 Still Noisy

Post by Bayrat » Sun Nov 27, 2011 7:51 pm

OK well mine is not loud, just noticeable.