Resview 3.x (reposted from Uncle Bob's thread)

dkeat · Post by **dkeat** » Sun Mar 13, 2011 2:08 am

Greetings

Just got a new S9 and as a result was interested in finding out if it was possible to get a copy of Resview. The CPAP.com shop doesn't seem to have it available and then I found Uncle Bob's posting. Much appreciated for sure! I downloaded it and have a few issues and thought maybe someone might be able to give me a hand. First of all the software is displaying in German. I assume it read the location of my pc and displayed accordingly. Normally there is an "option" to set the language to another but I wasn't able to find it. If anyone has a clue?

The other thing is that when I started the program I got this error:

intf!=0 @
C:\PROGRA~1\Borland\CBuild~1\Bin\..\include\vcl\UtilCls.H/2868
Press [Y]es to terminate, [N]o to continue and [C]ancel to debug

I haven't a clue what it means. I hit [N] and the program loaded. I have an SD slot on my notebook and tried to export the data on my SD card to the program but it didn't recognize my SD slot. Does the program only work with one of the Resmed card reader devices or is there some way to get it to read from my SD slot?

So that's where I stand on this at the moment. If anyone can help with any of these issues it would be wonderful.

Oh, and as far as I was able to determine the latest version of Resview is 3.7. Is it impossible as an unlicensed and uninitiated human to get a hold of it?

Slinky · Post by **Slinky** » Sun Mar 13, 2011 7:32 am

You are confusing Resmed's ResScan software and Respironics' EncoreViewer software. The highest version of ResScan I am aware of is ResScan 3.13

dkeat · Post by **dkeat** » Sun Mar 13, 2011 7:41 am

I don't think so. Google Rescan 3.7 and see what you get.

Bobby269 · Post by **Bobby269** » Sun Mar 13, 2011 7:50 am

Look at Uncle_Bob's latest download option. It"s a later version, not the one that you mentioned. On my computer it says 3.13.

DreamDiver · Post by **DreamDiver** » Sun Mar 13, 2011 8:51 am

dkeat wrote:I don't think so. Google Rescan 3.7 and see what you get.

Try ResScan 3.13. (Two s's...)

Click 'Members' next to your 'Logout' link. Find Uncle_Bob. Go to the bottom of his signature. Find the link for ResScan 3.13. I hope this helps.

dkeat · Post by **dkeat** » Sun Mar 13, 2011 9:40 am

Yes Resscan 3.13. If you read my original posting you will see that I downloaded Resscan 3.13 a few days ago. I'm in fact looking for help with Resscan 3.13. I'm also curious to know if anyone knows where the latest version can be obtained.

msradar65 · Post by **msradar65** » Sun Mar 13, 2011 10:32 am

resscan 3.13 is the latest version of the software. I have not been able to make it work. It gets in a install loop and never finishes.

Slinky · Post by **Slinky** » Sun Mar 13, 2011 10:46 am

Yup, I ran into that, left my 'puter on all night and it was still "looping" in the morning. I think, if I remember correctly, that if you are using Win XP as I was, you need to do some type of XP update. I'm vague on this 'cause I just gave up and had my 'puter guru do the update and the install.

dkeat · Post by **dkeat** » Sun Mar 13, 2011 11:38 am

Okay. I'm confused now. I realized I titled this thread as Resview 3.x when I guess it should have been Resscan 3.x. Anyway, there does seem to be a Version of Resscan 3.7 out there and here is a thread from this forum discussing it:

viewtopic/t36911/Resscan-37.html

As far as I am aware a Version 3.7 is a later (more advanced) version than 3.13 although the actual difference might be academic. In any case I haven't been able to get Resscan 3.13 to load data from my SD card and that is what I was really trying to learn by posting this thread.

Bodhi · Post by **Bodhi** » Sun Mar 13, 2011 12:09 pm

mstevens · Post by **mstevens** » Sun Mar 13, 2011 12:29 pm

13 does come after 7, and it's perfectly reasonable for a version numbering scheme to reflect that. Since it's clear that people get confused (is it 3.1.3 vs. 3.7.0? Is it 3.13 vs. 3.07?), ResMed could probably have chosen a less ambiguous naming convention.

dkeat · Post by **dkeat** » Sun Mar 13, 2011 12:40 pm

Okay. Well I've got that cleared up. Now all I need to do is find out why I can't run it.

Pugsy · Post by **Pugsy** » Sun Mar 13, 2011 12:56 pm

dkeat wrote: Now all I need to do is find out why I can't run it

Maybe a bad install or bad download? Have you tried just getting another download and install again to see if same error pops up?

DreamDiver · Post by **DreamDiver** » Sun Mar 13, 2011 3:41 pm

dkeat wrote:Okay. Well I've got that cleared up. Now all I need to do is find out why I can't run it.

Try using the same url, but changing the link to reflect '3.12' instead. Download and install that instead. I couldn't get 3.13 to work either, so I reinstalled 3.12. Huh. I thought I was the only one who couldn't get it to install right.

dkeat · Post by **dkeat** » Sun Mar 13, 2011 4:25 pm

Hello Dream Diver

I tried doing what you suggested and if I actually understood you correctly it didn't work. I copied the link into a new browser window and manually changed the 3.13 to 3.12 and hit enter. The browser reported that no such page exists.

Perhaps you did it differently?

Resview 3.x (reposted from Uncle Bob's thread)

Resview 3.x (reposted from Uncle Bob's thread)

Re: Resview 3.x (reposted from Uncle Bob's thread)

Re: Resview 3.x (reposted from Uncle Bob's thread)

Re: Resview 3.x (reposted from Uncle Bob's thread)

Re: Resview 3.x (reposted from Uncle Bob's thread)

Re: Resview 3.x (reposted from Uncle Bob's thread)

Re: Resview 3.x (reposted from Uncle Bob's thread)

Re: Resview 3.x (reposted from Uncle Bob's thread)

Re: Resview 3.x (reposted from Uncle Bob's thread)

Re: Resview 3.x (reposted from Uncle Bob's thread)

Re: Resview 3.x (reposted from Uncle Bob's thread)

Re: Resview 3.x (reposted from Uncle Bob's thread)

Re: Resview 3.x (reposted from Uncle Bob's thread)

Re: Resview 3.x (reposted from Uncle Bob's thread)

Re: Resview 3.x (reposted from Uncle Bob's thread)

Machine	Mask

Machine	Mask

Machine	Mask

Machine	Mask