Adjusting REMstarPro M series

[mdeville]

Can anyone tell me how to adjust the pressure setting on my M series machine? I'm at 11 now and trying to bump it up to 12 maybe 13. Thanks!

[Pugsy]

See if this below gets you where you want to go, if not let us know. I had other stuff on the other computer and this was first one I found.


Respironics REMstar M Series:
To get into the clinician's setup mode in a REMstar M Series CPAP machine or a BiPAP M Series CPAP machine follow these steps:

1. unplug the power cord from the back of the CPAP machine
2. hold down both the left and right arrow keys while simultaneously plugging in the power supply
3. once the device beeps twice, you can release the buttons

After you hear the two beeps, you'll see the word setup in the lower right corner of the LCD screen. When you select setup you'll be in the clinician's mode where you can adjust every feature of the CPAP machine, including the pressure setting. Below is the list of settings you can cycle through on a REMstar Plus M Series:

* CPAP Pressure (only in provider setup mode)
* Altitude
* Fine Pressure Adjustment (only in provider setup mode)
* C-Flex Setting
* Ramp Time
* Ramp Start Pressure
* Mask Alert
* Auto Off
* Patient Reminder (only in provider setup mode)

[mdeville]

That did it.

Thanks!

[Pugsy]

You are most welcome. Glad to help.