mattress topper results

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
DoriC
Posts: 5214
Joined: Sat Sep 13, 2008 9:28 pm
Location: NJ

Re: mattress topper results

Post by DoriC » Mon Aug 24, 2009 7:08 am

OK, that's what I was pretty much afraid of, that "sinking into a hole". Mike would definitely have a hard time turning over as he has problems turning now on a fairly firm mattress. He's about 180lbs. As soon as things cool down here in NJ, I will take him out to try a latex topper somewhere. Thanks for giving me the straight scoop. Dori

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Additional Comments: 14/8.4,PS=4, UMFF, 02@2L,
"Do or Do Not-There Is No Try"-"Yoda"
"We are what we repeatedly do,so excellence
is not an act but a habit"-"Aristotle"
DEAR HUBBY BEGAN CPAP 9/2/08

User avatar
LouC
Posts: 20
Joined: Wed Feb 18, 2009 11:21 am

Re: mattress topper results

Post by LouC » Mon Aug 24, 2009 1:02 pm

wearysoul wrote:
DoriC wrote:My question(and my concern) is how easy is it to turn over from side to side? Does the topper material make a valley(indentation) that might make it harder for him to turn over? Where is Pugsy? Thanks, Dori
Dori, I found it pretty easy to turn over on my side. I didn't feel I was sinking down into the topper so far that I had to lift myself out of a valley or an imprint of my body. My old mattress underneath is pretty firm (though I notice it's sagging slightly) and I think that may help keep the topper from feeling too soft. I slept on a memory foam bed once in a hotel and I would say that the latex is definitely somehow different. I didn't have any issues with the comfort of the memory foam, but I did notice the sinking phenomenon, which some people might not like.
tattooyu wrote:When the time comes to replace our mattress (in about 3 years), I am highly considering spending the money for a natural latex foam mattress. Supposedly, you get all the benefits of memory foam, but without the downsides, i.e., being hot, sinking into the bed, lumping of the mattress.

I think latex foam mattress are rated to last between 20-30 years, and supposedly they do!
I've been lusting over latex mattress also. I've been looking at them on a web site called savvyrest.com. I've been leaning toward an air bed (Comfortaire), but definitely wouldn't mind a latex mattress. Their long life is very appealing.
I'm very heavy and break down cheap mattresses quickly. I spent a night on memory foam and felt like I was sleeping in plastic Jello. I bought a 4 layer (XFIRM,XFIRM,FIRM,MED) latex from http://www.sleepez.com/latex-mattresses.htm and a steel frame. Standard sheets fit fine. They ship 4" layers and will even split them in larger sizes (each half can have a different sequence) You can stack them in any order to get the feel you want.(but get a couple of strong friends) The phone help was great. I got a much better price by picking it up and paying cash, but I wouldn't trade this bed for anything else on the market. They do toppers too. I would buy from them again.

User avatar
DoriC
Posts: 5214
Joined: Sat Sep 13, 2008 9:28 pm
Location: NJ

Re: mattress topper results

Post by DoriC » Wed Sep 16, 2009 5:09 pm

Well, after not being able to find a store that sells latex toppers, just mattresses, I decided to take my chances and order the E.C.O 2" latex foam topper from Overstock, the one WearySoul has. We unpacked it last night about 7PM, no odor at all but we left in on the floor for a few hrs anyway, then made up the bed. First night's report = EXCELLENT!! Mike slept very comfortably, no problem turning over and it relieved his right hip pain when he was lying on that side. His leak rate was lower also. I suspect it was from being less restless. One silly question? Did you have to buy new fitted sheets with deeper pockets? The ones we have barely fit now. Thanks for all the help, I hope anyone having bedding problems can benefit from this post.

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Additional Comments: 14/8.4,PS=4, UMFF, 02@2L,
"Do or Do Not-There Is No Try"-"Yoda"
"We are what we repeatedly do,so excellence
is not an act but a habit"-"Aristotle"
DEAR HUBBY BEGAN CPAP 9/2/08

User avatar
5aces
Posts: 345
Joined: Wed Sep 10, 2008 4:47 pm
Location: Toronto

Re: mattress topper results

Post by 5aces » Wed Sep 16, 2009 5:27 pm

I've usually had a featherbed topper but now there is this and it's comfy:

http://www.ikea.com/us/en/catalog/products/20112087

I have a mattress from Natura,natural latex as well:

http://www.naturaworld.com/
Last edited by 5aces on Wed Sep 16, 2009 5:35 pm, edited 1 time in total.
ImageImage

User avatar
Pugsy
Posts: 65411
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: mattress topper results

Post by Pugsy » Wed Sep 16, 2009 5:31 pm

DoriC wrote:Did you have to buy new fitted sheets with deeper pockets?
I already had some deep pocket fitted sheets. Yep, they do make a difference. Even with the 4 inch topper that I got they fit well. They are extra deep though and I have a pillow top mattress that is tall so.... I needed the extra depth.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

User avatar
DoriC
Posts: 5214
Joined: Sat Sep 13, 2008 9:28 pm
Location: NJ

Re: mattress topper results

Post by DoriC » Wed Sep 16, 2009 5:38 pm

Do you have a ladder that matches your furniture? From what I remember you said you were petite. Thanks for the quick reply. JC Penney tomorrow.

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Additional Comments: 14/8.4,PS=4, UMFF, 02@2L,
"Do or Do Not-There Is No Try"-"Yoda"
"We are what we repeatedly do,so excellence
is not an act but a habit"-"Aristotle"
DEAR HUBBY BEGAN CPAP 9/2/08

User avatar
Pugsy
Posts: 65411
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: mattress topper results

Post by Pugsy » Wed Sep 16, 2009 5:43 pm

DoriC wrote:Do you have a ladder that matches your furniture? From what I remember you said you were petite.
I am a little less than 5 ft tall with short legs to boot. It is not a graceful image when I have to climb on top of all my stuff... If I am in too much pain I supposed I could use the doggie steps (yep, for the pug to get on and off the bed) but so far I haven't had to resort to it.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

User avatar
Muse-Inc
Posts: 4382
Joined: Fri Jun 12, 2009 8:44 pm
Location: Atlanta, GA

Re: mattress topper results

Post by Muse-Inc » Wed Sep 16, 2009 6:32 pm

Great news Dori! I'm glad he's getting some comfort. Wonderful that his leak is less, fingers crossed it continues!
DoriC wrote:...Did you have to buy new fitted sheets with deeper pockets? The ones we have barely fit now...
Yup.
ResMed S9 range 9.8-17, RespCare Hybrid FFM
Never, never, never, never say never.