Comfort curve

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
doug2
Posts: 2
Joined: Mon Sep 12, 2005 1:16 am

Comfort curve

Post by doug2 » Mon Sep 12, 2005 1:26 am

Hi
I have a comfort curve which I have tried to use for about 45 minutes and no matter what I do I can't make it seal. Is anyone interested in this mask? If so, pm me with offers.

I realize I'm kind of a new be around here so I will provide my ebay username to see my feedback upon request.


User avatar
joey
Posts: 53
Joined: Mon Jan 24, 2005 3:54 pm
Location: Spring. Tx
Contact:

It takes longer

Post by joey » Mon Sep 12, 2005 4:51 pm

Doug, Don't give up so soon. It took me several weeks of steady use to like my comfort curve. You may be trying the wrong size nose piece. I am a large man but I use the medium. The nose piece should fit underneath your nose and no part of your nose can be inside it. I also found it helpful to turn the head gear backwards and put the adjustable part behind my head instead of the top. Try it again and be persistent and you will get used to it and then you won,t like the others.


_________________
Mask

DrDroopy
Posts: 32
Joined: Fri May 13, 2005 6:15 am
Location: Iowa

Post by DrDroopy » Mon Sep 12, 2005 4:53 pm

If you go back to the threads from around May and June, there are alot of postings about making the comfort curve fit. Of course it isn't for everyone, but people were pretty creative about making this thing work.


Pamela444
Posts: 15
Joined: Wed Jun 08, 2005 6:24 pm

A borrowed suggestion

Post by Pamela444 » Mon Sep 12, 2005 7:03 pm

I had the same problem with my Comfort Curve, but I found an interesting solution on here. I wish I could give credit to the poster, but I don't remember who it was.

She/he suggested taking off the cheek pads and placing a folded in half pantiliner under each side. It really helped.


Guest222

rash with comfort curve

Post by Guest222 » Mon Sep 12, 2005 7:15 pm

I just started using the comfort curve within the last month. I thought this would finally help me, but 2 to 3 hours into the night, the pads became uncomfortable and I had a red rash on both of my cheeks. Any suggestions would be appreciated. Hope to have a decent night's sleep sometime soon.


User avatar
rested gal
Posts: 12881
Joined: Thu Sep 09, 2004 10:14 pm
Location: Tennessee

Post by rested gal » Mon Sep 12, 2005 7:18 pm

Hi Pamela,

The message board poster and lab rat extraordinaire who came up with the idea that helped you, was....

CareS !!

Very creative lady!!

The topic she wrote about it had "pantyliner thins" in the subject line.

Guest, maybe you can find something to help you with the CC in one of the many topics here:

LINKS to Comfort Curve nasal mask topics

DrDroopy
Posts: 32
Joined: Fri May 13, 2005 6:15 am
Location: Iowa

Post by DrDroopy » Tue Sep 13, 2005 6:57 am

If the pantyliner idea does not appeal to you, I use moleskin. Removing the face pads and replacing them with a thin layer of moleskin makes this mask snug right up to my face and it fits pretty well now. I have the best luck sleeping on my side, as I can lay my head on the pillow and then inch it forward a bit to really pull the CC firmly onto my nose. It is the only mask I can use, as I can't stand having something over my nose or in my line of vision and I don't like the nasal pillows. Still, I'm waiting for the next great thing to come along!


sleep deprived mom

another option for the comfort curve

Post by sleep deprived mom » Tue Sep 13, 2005 8:38 pm

I just found this site last night while I was trying to decide which mask to order to replace my much-hated comfort curve. Thank you all for giving me a solution to my fitting problems! I figured I would give it one last try and do the pantiliner trick, but at 1 am discovered there were none in the cabinet!! There were, however, these square cottonball things (quilted cotton pads--they come in a pack of 200) that I bought to remove makeup. You have to hold them in place while you put the mask on, but they worked great!! They were very soft and comfortable against my face, and I slept all the way through the night (yeah!! no waking up to re-fit). I slept on my side(!!!!) and woke up in the morning without big red spots on my cheeks!!! I can't thank you all enough for the inspiration. I thought that some of those out there who were uncomfortable with the pantiliner idea might be able to try the cotton pads. Thanks!!


doug2
Posts: 2
Joined: Mon Sep 12, 2005 1:16 am

Post by doug2 » Wed Sep 14, 2005 2:16 am

My problem is getting the nose piece to get a good seal. I took the cheak pads completely off until I could get a seal. I get the best seal with the small but then I feel deprived of air.


kurtr

Post by kurtr » Wed Sep 14, 2005 9:20 am

I had to return mine.
I too had the best seal with the small but the nostril hole was not big enough for air flow directly into the nostrils.
I was going to use an exacto knife to make it bigger but just gave up.
They have a good idea but it is not there yet....


User avatar
MartiniLover
Posts: 364
Joined: Wed Jan 12, 2005 4:16 pm
Location: Davison Michigan

Post by MartiniLover » Wed Sep 14, 2005 9:49 am

Just like all masks.

If they work for you, GREAT

If they don't..............

Works for me, of course I have large nose, small nares.

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Additional Comments: Second favorite mask--Nasal Aire II
I am a two martini lover. Two martinis and I think I am a lover!

Bipap 13/9, 10ft Hose

User avatar
joey
Posts: 53
Joined: Mon Jan 24, 2005 3:54 pm
Location: Spring. Tx
Contact:

What size are you using.

Post by joey » Fri Sep 16, 2005 4:43 pm

Doug, What size are you using. They run big. I am a large man but use the medium nose piece. Maybe you should try the different sizes.

_________________
Mask

User avatar
christinequilts
Posts: 489
Joined: Sun Jan 23, 2005 12:06 pm

Post by christinequilts » Fri Sep 16, 2005 10:34 pm

I tried the pantyliner trick, but I'm allergic to most adhesives and really didn't want to chance it touching my face so after a couple nights I thinned the silicone check pads down. I used small, very sharp but with rounded tips scissors and bascially made them about 1/2 as thick as they originally were by cutting from the backside very carefully. Considering I did it in the middle of the night, out of sheer frustration it shouldn't be too hard for anyone to do...you just have to be careful to not go all the through or nick the part that curves under to hold the check pads on the mask. I say forget offering optional color packs...I'd much rather have an option on check pad thickness then worry if my mask matches my PJ's

User avatar
lynn
Posts: 102
Joined: Fri Feb 04, 2005 1:22 pm
Location: central Washington state

Post by lynn » Sat Sep 17, 2005 1:35 pm

Picked up a Comfort Curve locally to try it out. Haven't had time to fiddle with it yet, but as I was planning to use it tonight, I took a good look at it and noticed that the headgear apparently isn't the "new and improved" one shown on the website
http://comfortcurve.respironics.com/

Does yours have the new headgear with adjustable top strap or the old split strap one that goes over the head (no adjustment on top)? Now that it's Saturday I can't reach the DME to ask until Monday. (I don't see that new headgear on cpap.com either - just what they call standard...???).

lynn


_________________
MaskHumidifier
Additional Comments: i love resmed stuff!

User avatar
Oh 2 breathe
Posts: 59
Joined: Sun Sep 18, 2005 5:04 pm
Location: Ottawa, Ontario

Post by Oh 2 breathe » Mon Sep 19, 2005 6:25 am

I don't know if a small face size is a part of your problem, but I found wedge shaped make-up sponges were very helpful. See my posting in the general forum called Comfort Curve Tip for Small Faces.

~ Oh 2 breathe