Encore Pro Analyzer problem
Encore Pro Analyzer problem
Does anyone know if Encore Analyzer Pro has problems running on a 32 bit Windows Vista OS? I keep getting an error message that says "setup.exe is not a valid Win32 application".
Re: Encore Pro Analyzer problem
Oh yeah. Surf here for "Vista+Encore Pro" and you'll find lots of chat about it.
Check out the PDF file I PM-ed you "Encore Pro on Vista Installation Instructions". That might help, too.
This is for 64 bit, but it MIGHT help, heck, I dunno... I'm just trying to help.
How to Run Encore Pro Under Vista 64 bit:
viewtopic/t40234/How-to-run-EP-under-Vi ... ution.html
If you have SQL previously installed, remove it.Reboot PC to ensure is gone.
copy all directories and files from CD to disk drive.
go to directory called /files/SQL 2005
delete SQLEXPR32.exe
go to : http://www.microsoft.com/DOWNLOADS/deta ... laylang=en scroll down and download file SQLEXPR.EXE with size 55.4 MB (both version in this file 32 and 64 bits.
Copy downloaded file into /files/SQL 2005 and change name to SQLEXPR32.exe
Run installation.
Choose under installation advanced.
You have tick two boxes, database and program.
You are ready to go.
Good luck!
B.
Check out the PDF file I PM-ed you "Encore Pro on Vista Installation Instructions". That might help, too.
This is for 64 bit, but it MIGHT help, heck, I dunno... I'm just trying to help.
How to Run Encore Pro Under Vista 64 bit:
viewtopic/t40234/How-to-run-EP-under-Vi ... ution.html
If you have SQL previously installed, remove it.Reboot PC to ensure is gone.
copy all directories and files from CD to disk drive.
go to directory called /files/SQL 2005
delete SQLEXPR32.exe
go to : http://www.microsoft.com/DOWNLOADS/deta ... laylang=en scroll down and download file SQLEXPR.EXE with size 55.4 MB (both version in this file 32 and 64 bits.
Copy downloaded file into /files/SQL 2005 and change name to SQLEXPR32.exe
Run installation.
Choose under installation advanced.
You have tick two boxes, database and program.
You are ready to go.
Good luck!
B.
_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine |
Additional Comments: Started XPAP 04/20/07. APAP currently wide open 10-20. Consistent AHI 2.1. No flex. HH 3. Deluxe Chinstrap. |
I currently have a stash of Nasal Aire II cannulas in Small or Extra Small. Please PM me if you would like them. I'm interested in bartering for something strange and wonderful that I don't currently own. Or a Large size NAII cannula. 

Re: Encore Pro Analyzer problem
Crap, I'm an idiot. You're talking about ANALYZER... Please disregard my above post. My headache is making my marbles jumble up and roll around.
Sorry,
B.
Sorry,
B.
_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine |
Additional Comments: Started XPAP 04/20/07. APAP currently wide open 10-20. Consistent AHI 2.1. No flex. HH 3. Deluxe Chinstrap. |
I currently have a stash of Nasal Aire II cannulas in Small or Extra Small. Please PM me if you would like them. I'm interested in bartering for something strange and wonderful that I don't currently own. Or a Large size NAII cannula. 

Re: Encore Pro Analyzer problem
Toatally understandable. Dont worry about it. I got EP to run in 32 bit with absolutely no problems. WooHoo! But the analyzer does not want to open.
Re: Encore Pro Analyzer problem
James Skinner is still an active member of this board. If you surf around, you can find him and PM him.
Good luck!
B.
Good luck!
B.
_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine |
Additional Comments: Started XPAP 04/20/07. APAP currently wide open 10-20. Consistent AHI 2.1. No flex. HH 3. Deluxe Chinstrap. |
I currently have a stash of Nasal Aire II cannulas in Small or Extra Small. Please PM me if you would like them. I'm interested in bartering for something strange and wonderful that I don't currently own. Or a Large size NAII cannula. 

- leonardlake
- Posts: 73
- Joined: Thu Feb 15, 2007 12:47 pm
- Location: Colorado
Re: Encore Pro Analyzer problem
I haven't done it myself, but other posts here say that you should right click on the Encore Pro Analyzer icon and "run in administrator mode".
_________________
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Using ResScan V3.12 software to keep a tight pressure range around 9 cm H20 to minimize hyponeas and obstructive and central apneas |
Re: Encore Pro Analyzer problem
Well, I finally got the EPA to run. It wound up being a matter of setting the permissions to the correct setting to allow the .exe file to open up.
Re: Encore Pro Analyzer problem
Well, you're clearly smarter than me. Mind if I add you to my tip sheet?
And when/if I get brave enough to morph over to the new Vista 32 laptop I got for Xmas, I'm calling YOU!
LOL,
B.
And when/if I get brave enough to morph over to the new Vista 32 laptop I got for Xmas, I'm calling YOU!
LOL,
B.
_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine |
Additional Comments: Started XPAP 04/20/07. APAP currently wide open 10-20. Consistent AHI 2.1. No flex. HH 3. Deluxe Chinstrap. |
I currently have a stash of Nasal Aire II cannulas in Small or Extra Small. Please PM me if you would like them. I'm interested in bartering for something strange and wonderful that I don't currently own. Or a Large size NAII cannula. 

Re: Encore Pro Analyzer problem
I had problems getting a complete file on download from Jame's site. I got the same errors as you until I got the full file. Then it ran smoothly. Works great.
Re: Encore Pro Analyzer problem
I sure do like the looks of it. I cant wait to use it.
Re: Encore Pro Analyzer problem
SNORT! I could send you a spare smart card with some of my data on it, to play with.
LOL,
B.
LOL,
B.
_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine |
Additional Comments: Started XPAP 04/20/07. APAP currently wide open 10-20. Consistent AHI 2.1. No flex. HH 3. Deluxe Chinstrap. |
I currently have a stash of Nasal Aire II cannulas in Small or Extra Small. Please PM me if you would like them. I'm interested in bartering for something strange and wonderful that I don't currently own. Or a Large size NAII cannula. 

Re: Encore Pro Analyzer problem
Now thats a very generous offer. Thanks B.
Re: Encore Pro Analyzer problem
This is directly from a link on Skinner's Website for downloading the program:
"EPA on Vista
Some users have been having troubles with getting EPA to work on Vista with Encore Pro 1.8i. The problem appears to do with authentication to the SQL database. For now the work around is as follows:
1. Right click on the icon for EPA (not the shortcut but the actual program)
2. Goto the Compatibility tab
3. Under Privilege level, check 'Run this program as an administrator'
"
"EPA on Vista
Some users have been having troubles with getting EPA to work on Vista with Encore Pro 1.8i. The problem appears to do with authentication to the SQL database. For now the work around is as follows:
1. Right click on the icon for EPA (not the shortcut but the actual program)
2. Goto the Compatibility tab
3. Under Privilege level, check 'Run this program as an administrator'
"
_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
Additional Comments: Encore Pro, Backup-M Series BiPAP Auto. Set as ABiPAP 15I/9E AHI 0.2. Normally operates @ 12I/9E 1987 OSA diagnosis |
If your never go off on a tangent, you are doomed to live your life going around in circles.
Re: Encore Pro Analyzer problem
Yeah, that is what I found too, but it wouldnt work for me as Administrator so I chose PC- User instead and it works fine now.
Re: Encore Pro Analyzer problem
I'm KIDDING!!!! Seriously, I couldn't even find the extra card in the incredible mess I'm living in right now. I'm one of those "before" houses. Where's my Clutter Busters to come clean my house????Bearcat42 wrote:Now thats a very generous offer. Thanks B.
LOL,
B.
_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine |
Additional Comments: Started XPAP 04/20/07. APAP currently wide open 10-20. Consistent AHI 2.1. No flex. HH 3. Deluxe Chinstrap. |
I currently have a stash of Nasal Aire II cannulas in Small or Extra Small. Please PM me if you would like them. I'm interested in bartering for something strange and wonderful that I don't currently own. Or a Large size NAII cannula. 
