My Theory based on Respronics Response

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
ChipsXJ
Posts: 68
Joined: Wed Feb 04, 2009 7:10 am
Location: Broken Arrow, OK

Re: My Theory based on Respronics Response

Post by ChipsXJ » Fri Mar 13, 2009 1:16 pm

I am just gonna call this good and monitor in case I deviate too much.

Thanks for all the input.

Image
M Series Auto CPAP with A-Flex
Fisher & Paykel Flexifit 431
Remstar Integrated Passover Humidifier
M Series Smartcard Module
Encore Pro 1.8.49; Encore Pro Analyzer 0.8.9
Setting 10
Image

User avatar
roster
Posts: 8159
Joined: Wed Jan 18, 2006 8:02 pm
Location: Chapel Hill, NC

Re: My Theory based on Respronics Response

Post by roster » Fri Mar 13, 2009 1:25 pm

The Texan wrote:Question about reading the LEAK information on Encore Pro. There are 4 sections, Avg max leak, Avg 90% leak, Avg leak and Avg large leak. What does each stand for and what should I be looking for. Mine, with my equipment are, in order, 98.7, 39.0, 33.6, 0. Are these good, bad or what? Maybe once I understand what I'm looking at, then I will understand Respironics response to the OP.
Good question Tex.

In statistics, averages are known to be very tricky. Like it is 32 miles to the office and it takes me just under an hour to drive, so my average speed driving to work is 33 miles per hour. I pleaded this to the patrolman on the expressway segment of the commute, but obviously he had academic training in averages and gave me a ticket for 87 mph in a 60. It cost me $735 in court costs and lawyer fees.

So I skim over all three of those averages and the 90% numbers.

You can understand what is going on from the daily detail report. Here there is no guessing what the averages or 90% numbers mean. Once you get your therapy optimized, you will see smooth lines over much of the night. Your interest will be drawn to one or more times during the night when the lines go frantic. Like you rolled over and a large leak started. Or you rolled onto your back and apneas show up and the machine raises the pressure to try to compensate.

Regards,

User avatar
roster
Posts: 8159
Joined: Wed Jan 18, 2006 8:02 pm
Location: Chapel Hill, NC

Re: My Theory based on Respronics Response

Post by roster » Fri Mar 13, 2009 1:32 pm

ChipsXJ wrote:I am just gonna call this good and monitor in case I deviate too much.

Thanks for all the input.

Image
Do what you want, but that would be too much snoring for me. I would bump the pressure 0.5 cm for a few nights and see what happens. You could step it up three or four times if necessary. I mean you are going to all the trouble to use CPAP, why not get rid of snoring which is also dangerous to health?

Your leak line is excellent.

Image
How the heck did you ever get a mask to fit?

User avatar
ChipsXJ
Posts: 68
Joined: Wed Feb 04, 2009 7:10 am
Location: Broken Arrow, OK

Re: My Theory based on Respronics Response

Post by ChipsXJ » Fri Mar 13, 2009 2:36 pm

rooster wrote:
Do what you want, but that would be too much snoring for me. I would bump the pressure 0.5 cm for a few nights and see what happens. You could step it up three or four times if necessary. I mean you are going to all the trouble to use CPAP, why not get rid of snoring which is also dangerous to health?

Your leak line is excellent.

Image
How the heck did you ever get a mask to fit?
I agree with your point about snoring. I was planning on doing some work on the snoring issue..............just waiting until I had the leak issue under control. I have been (over) worrying about my leaks that I now believe are in check.

So, now I will attack the snoring issue...............and any other issue that arise. I was just trying to make the point that I was not going to worry anymore about leaks unless my reports indicated I was having large leaks or a trend of any leaks that lead me to recieve poor treatment/therapy!

Thank you for your input
M Series Auto CPAP with A-Flex
Fisher & Paykel Flexifit 431
Remstar Integrated Passover Humidifier
M Series Smartcard Module
Encore Pro 1.8.49; Encore Pro Analyzer 0.8.9
Setting 10
Image

User avatar
MrSandman
Posts: 423
Joined: Sat Nov 22, 2008 2:11 pm

Re: My Theory based on Respronics Response

Post by MrSandman » Sat Mar 14, 2009 12:26 am

Do a search as this has been hashed and rehashed. I posted a thread recently about people making too much out of leak lines being perfect. I think it compensates in cpap mode good but in apap mode from my own experience leaks drive the machine crazy(Respironics M-series anyway).

That isn't a whole lot of snores...
MrSandman - Send me a dream...

Hey, I wanted a cool name related to sleep...

User avatar
ChipsXJ
Posts: 68
Joined: Wed Feb 04, 2009 7:10 am
Location: Broken Arrow, OK

Re: My Theory based on Respronics Response

Post by ChipsXJ » Sat Mar 14, 2009 6:22 am

MrSandman wrote:Do a search as this has been hashed and rehashed. I posted a thread recently about people making too much out of leak lines being perfect. I think it compensates in cpap mode good but in apap mode from my own experience leaks drive the machine crazy(Respironics M-series anyway).

That isn't a whole lot of snores...

But if I am not chasing the leak line...................and I do not chase the snores...................then what in the world will I do?
M Series Auto CPAP with A-Flex
Fisher & Paykel Flexifit 431
Remstar Integrated Passover Humidifier
M Series Smartcard Module
Encore Pro 1.8.49; Encore Pro Analyzer 0.8.9
Setting 10
Image

ozij
Posts: 10469
Joined: Fri Mar 18, 2005 11:52 pm

Re: My Theory based on Respronics Response

Post by ozij » Sat Mar 14, 2009 7:36 am

ChipsXJ wrote:
MrSandman wrote:Do a search as this has been hashed and rehashed. I posted a thread recently about people making too much out of leak lines being perfect. I think it compensates in cpap mode good but in apap mode from my own experience leaks drive the machine crazy(Respironics M-series anyway).

That isn't a whole lot of snores...

But if I am not chasing the leak line...................and I do not chase the snores...................then what in the world will I do?
Sleep restfully?

_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: Machine: Resmed AirSense10 for Her with Climateline heated hose ; alternating masks.
And now here is my secret, a very simple secret; it is only with the heart that one can see rightly, what is essential is invisible to the eye.
Antoine de Saint-Exupery

Good advice is compromised by missing data
Forum member Dog Slobber Nov. 2023

User avatar
roster
Posts: 8159
Joined: Wed Jan 18, 2006 8:02 pm
Location: Chapel Hill, NC

Re: My Theory based on Respronics Response

Post by roster » Sat Mar 14, 2009 11:44 am

MrSandman wrote: ......

That isn't a whole lot of snores...
We can disagree on this point. If I could get rid of most of them by raising the pressure by 0.5 to 1.5 cm, I would do it.