pressure change

gest · Post by **gest** » Fri Jan 18, 2008 3:05 am

can someone please tell me how to change the pressure setting for M Series Plus C-Flex CPAP Machine. the present setting is 18cm/H2O and I feel like its blowing off my face. I brought it from the internet and really dont know who to ask.

Pilot_Ron · Post by **Pilot_Ron** » Fri Jan 18, 2008 5:33 am

unplug the connector from the back, and while plugging it back in, hold down the two top buttons simultaniously until you hear 2 beeps. then release the buttons. press the setup button, and scroll through using the top right button. you will 1st see cpap, then the next time you press, you will see the pressure. you can increase the pressure with the plus and minus. adjust the machine then hit the power button to set the machine. you should be good to go.

rested gal · Post by **rested gal** » Fri Jan 18, 2008 7:54 am

http://www.cpap-supply.com/Articles.asp?ID=130

Scroll to the bottom of that page. Click the link to instructions for your machine.

nettermo · Post by **nettermo** » Sat Jan 19, 2008 8:49 am

THANK YOU!!!!! Doc lowered my max pressure yesterday, so you saved me a 40 minute drive for a 30 second adjustment by a DME therapist who is...um, (be nice, be nice) frustrating.

reecemj · Post by **reecemj** » Sat Jan 19, 2008 10:56 am

Thank you so much. You save me the trouble of calling the doctor.

Thnks again

Reece

Humidifier

Additional Comments: Remstar Auto A-Flex Aussie Heated Hose Auto 8-15 cm H2O pressure A-Flex 2 Backup Remstar Plus w/C-Flex

pressure change

pressure change

THANK YOU!

thanks to rested gal