software for M auto a-flex

Jon B · Post by **Jon B** » Mon Dec 17, 2007 11:26 pm

Where do I buy the software for M-Auto a-flex? Is the software encore pro 1.8?

Goofproof · Post by **Goofproof** » Tue Dec 18, 2007 12:16 am

Yes, you have to have 1.8 with that model. Check your P.M.'s in a few minutes. They don't work quickly sometimes. Jim

Goofproof · Post by **Goofproof** » Tue Dec 18, 2007 12:18 am

You aren't logged in I can't P>M. you.

6PtStar · Post by **6PtStar** » Tue Dec 18, 2007 12:26 am

Encore Viewer 1.0 can be purchased at cpap.com will work with it.

Jerry

_________________

CPAPopedia Keywords Contained In This Post (Click For Definition): cpap.com

rested gal · Post by **rested gal** » Tue Dec 18, 2007 2:16 am

Jon B wrote:Where do I buy the software for M-Auto a-flex? Is the software encore pro 1.8?

The software called EncoreViewer 1.0 will work with the Respironics REMstar Auto/A-flex M series machine as well as with the older Respironics machines.

The owners ( cpap.com ) of this message board have EncoreViewer for sale, as do some other online stores.

EncoreViewer will give the same detailed data info as Encore Pro 1.8

Bamafanatic56 · Post by **Bamafanatic56** » Tue Dec 18, 2007 8:04 am

I am also intersted in The Encore Pro 1.8. Where can I get it?
Thanks

Reborndreamer · Post by **Reborndreamer** » Tue Dec 18, 2007 9:02 am

Hello everyone

I am also intersted in The Encore Pro 1.8. Where can I get it? or buy it

Thanks

Michel (the newbie)

I bougth the EncoreViewer 1.0 but would like a more in deep analysis and report fonctions.

rested gal · Post by **rested gal** » Tue Dec 18, 2007 9:41 am

Reborndreamer wrote:Hello everyone

I am also intersted in The Encore Pro 1.8. Where can I get it? or buy it

Thanks

Michel (the newbie)

I bougth the EncoreViewer 1.0 but would like a more in deep analysis and report fonctions.

EncoreViewer 1.0 gives the same data reports as Encore Pro 1.8. Same data, presented the same way.

Differences I've noticed for analysis purposes are:

1. you can export an Encore Pro report to PDF (and some other formats) with a single click while viewing the report. To do that with an EncoreViewer report, you need to take a few extra steps using an extra program that will save it to PDF. I use a free program called "PrimoPDF" for that.

2. James Skinner's Encore Pro Analysis works with Encore Pro but not with EncoreViewer. Yet. He's probably working on that.

Reborndreamer · Post by **Reborndreamer** » Tue Dec 18, 2007 10:35 am

Thank Rested gal

I was refering to the James Skinner's Encore Pro Analysis with Encore Pro wich I already dowload . Since I am controlling my snorkle machine I was looking for tools to fine tune my posology.

I am already printing my report with "cutepdf" software but I was under the impression that pro add a little more infos.

Best

Michel (the newbie)

sburke91 · Post by **sburke91** » Tue Dec 18, 2007 1:56 pm

I'm also looking for a source to buy EncorePro 1.8 if it's still available, albeit 'under the counter', so to speak.

Snoredog · Post by **Snoredog** » Tue Dec 18, 2007 2:41 pm

rested gal wrote:
Reborndreamer wrote:Hello everyone

I am also intersted in The Encore Pro 1.8. Where can I get it? or buy it

Thanks

Michel (the newbie)

I bougth the EncoreViewer 1.0 but would like a more in deep analysis and report fonctions.
EncoreViewer 1.0 gives the same data reports as Encore Pro 1.8. Same data, presented the same way.

Differences I've noticed for analysis purposes are:

1. you can export an Encore Pro report to PDF (and some other formats) with a single click while viewing the report. To do that with an EncoreViewer report, you need to take a few extra steps using an extra program that will save it to PDF. I use a free program called "PrimoPDF" for that.

2. James Skinner's Encore Pro Analysis works with Encore Pro but not with EncoreViewer. Yet. He's probably working on that.

There is another PDF "printer" I've used that works pretty good called CutePDF, they also developed CuteFTP etc.

It is free to download and use, it installs like a printer in your printer pool, then you simply select print to PDF instead of your regular printer. Works pretty good:

http://www.cutepdf.com/

I use a Mac (both Tiger and Leopard) and it has that feature built-in as a print option.

upm903 · Post by **upm903** » Tue Jan 29, 2008 9:46 am

If u r interested in reports from the New Encore Viewer from Respironics I can run it for you and Email you the reports.

Using the utility at http://www.mycpap.com you copy your SmartCard to disk and Email me the file to UPMCPAP@hotmail.com .

All you need to buy now is just the card reader. You can save the sofware Price about 130$.

If satisfied you could reward me at the same Email.

Sam

software for M auto a-flex

software for M auto a-flex

Re: software for M auto a-flex

Me too!

Encore Viewer Reports

Humidifier

Additional Comments: Also using Aussie heated hose, pressure is 11 using CPAP mode, AHI is 2.6

Machine	Mask

Additional Comments: Armini about every other week for travel.