I just joined the board today, and I don't currently have a CPAP machine, but one is in my near future.
I had a sleep study done a few months ago and was told that I had an AHI of 35 and O2 sats dropped to 75%. That was a huge wake up call. My second sleep study to fit a mask and determine the proper pressure is scheduled for November (the earliest I could get in).
I've been reading the FAQ and newbies docs in this forum, spoken to friends who have a machine, googled a lot and watched a ton of Youtube videos, so I am learning every day. I don't have any questions at the moment, but I'm sure I will as time goes on.
This forum seems to be quite active with lots of great advice, so thank you in advance!!
New to the board and about to start my new life with a CPAP machine
- Deborah K.
- Posts: 436
- Joined: Mon Feb 24, 2020 11:15 pm
- Location: Colorado
Re: New to the board and about to start my new life with a CPAP machine
WELCOME! There are plenty of knowledgeable people here who will be happy to help you. In the meantime do lots of reading on the site. There is loads of information that will help you as you begin your new therapy. 

Machine: Resmed AirSense 10 Autoset For Her
Mask: Bleep Dreamport mask system
Mask: Bleep Dreamport mask system
- ChicagoGranny
- Posts: 15309
- Joined: Sun Jan 29, 2012 1:43 pm
- Location: USA
Re: New to the board and about to start my new life with a CPAP machine
@chicagogranny
You caught that!
You caught that!

- Wulfman...
- Posts: 6688
- Joined: Mon Sep 01, 2014 6:41 pm
- Location: Nearest fishing spot
Re: New to the board and about to start my new life with a CPAP machine
Embrace this new chapter in your life and take control of your therapy as soon as possible. That's why we're here.cliff2112 wrote: ↑Wed Oct 05, 2022 1:03 pmI just joined the board today, and I don't currently have a CPAP machine, but one is in my near future.
I had a sleep study done a few months ago and was told that I had an AHI of 35 and O2 sats dropped to 75%. That was a huge wake up call. My second sleep study to fit a mask and determine the proper pressure is scheduled for November (the earliest I could get in).
I've been reading the FAQ and newbies docs in this forum, spoken to friends who have a machine, googled a lot and watched a ton of Youtube videos, so I am learning every day. I don't have any questions at the moment, but I'm sure I will as time goes on.
This forum seems to be quite active with lots of great advice, so thank you in advance!!
Den
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
-
- Posts: 523
- Joined: Sat Feb 13, 2021 2:40 am
Re: New to the board and about to start my new life with a CPAP machine
Hope that you will be among the lucky few that will breeze through the adaptation process

If not, having a positive attitude and being willing to power through the difficulties you encounter will dictate whether the CPAP will work for you.
The following post about "BUT-heads" is illuminating.
viewtopic.php?f=1&t=184678&p=1415675&#p1415675
Good luck
If not, having a positive attitude and being willing to power through the difficulties you encounter will dictate whether the CPAP will work for you.
The following post about "BUT-heads" is illuminating.
viewtopic.php?f=1&t=184678&p=1415675&#p1415675
Good luck
ResMed Lumis Tx
Re: New to the board and about to start my new life with a CPAP machine
There is a lot of info to be learned at the "CPAP wiki" at the top of the page. Suggest putting it on your reading list.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
ResMed AirSense 10 Autoset with built in humidifier
Resmed P10 pillow mask
Resmed P10 pillow mask