Can I request an Analysis please

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
Kapitan
Posts: 13
Joined: Sun May 16, 2021 5:08 pm

Can I request an Analysis please

Post by Kapitan » Mon Jun 07, 2021 12:18 pm

I have a new Resmed AirSense 10 AutoSet using a Swift fx nose pillow.

I had been sleeping great for a number of years but 2 months ago started having issues of waking with fast heart beat a few times a night. Since I have an overbite and some excess weight around my neck, it was thought a full face mask might work better. Tried it but after an hour or two each time, I felt like I wasn't getting enough air, so increased pressure and still didn't seem to be enough. Ended up going back to my comfy nose pillow.

I'm sleeping a little better but not like it used to be and wondering if you can chime in what you see on the graph I'll attach below.

I have used tape over my mouth as that seems to be where the most leaks are coming from and recorded, but that's not the most comfortable feel. So I've tried full face, tape over the mouth (which does seem to work better, but just not comfy) and still not getting the sleep I had been for years. I'd say I'm at about 70% of where I was.

Lastly, I generally feel pretty good in the morning but my eyes feel like they didn't get much rest oddly enough. Lol.
Thanks for any suggestions and thoughts you all may have.

Pat
Attachments
CPAP Talk Pic.png
CPAP Talk Pic.png (535.27 KiB) Viewed 396 times

User avatar
ChicagoGranny
Posts: 15372
Joined: Sun Jan 29, 2012 1:43 pm
Location: USA

Re: Can I request an Analysis please

Post by ChicagoGranny » Mon Jun 07, 2021 12:36 pm

Your pressure barely rises above the minimum IPAP of 14.8. If those were my charts, I would lower the minimum to 13.0 and rerun the analysis the next morning. A lower minimum might be more comfortable and might help with leaks.
Kapitan wrote:
Mon Jun 07, 2021 12:18 pm
So I've tried full face, tape over the mouth (which does seem to work better, but just not comfy) and still not getting the sleep I had been for years.
I've used various tapes and about a year ago settled on Somnifix. I use it under a FFM. Which FFM do you use.

Kapitan
Posts: 13
Joined: Sun May 16, 2021 5:08 pm

Re: Can I request an Analysis please

Post by Kapitan » Mon Jun 07, 2021 12:56 pm

Thanks ChicagoGranny…

My FFM is a F30i mask. I’ve actually not thought about that scenario… using the tape with the FFM. Hmmm…. I think I will try that after your suggestion to lower the pressure with my pillows!

Pat

User avatar
jimbud
Posts: 1469
Joined: Sat Dec 01, 2018 8:19 pm

Re: Can I request an Analysis please

Post by jimbud » Mon Jun 07, 2021 2:46 pm

Kapitan wrote:
Mon Jun 07, 2021 12:56 pm
My FFM is a F30i mask
Kapitan wrote:
Mon Jun 07, 2021 12:18 pm
it was thought a full face mask might work better. Tried it but after an hour or two each time, I felt like I wasn't getting enough air, so increased pressure and still didn't seem to be enough
I have used the F30i and liked it "except" the nasal holes tended to shift eventually during the night.
The strip between the two holes would end up partially covering one nostril and the other hole would shift toward the septum.
It would cause me to feel somewhat starved for air.

I have no idea if that is happening to you, just thought I would bring it up.
Might try another style Full Face mask (if you can find one you can tolerate). :)

Good luck.

JPB

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: Sleep on a Buckwheat Hull Pillow.

Kapitan
Posts: 13
Joined: Sun May 16, 2021 5:08 pm

Re: Can I request an Analysis please

Post by Kapitan » Mon Jun 07, 2021 2:56 pm

Jimbud…

I didn’t realize that could even happen so thank you VERY much for mentioning that. It could very well be happening to me indeed!! I do find it very comfortable so I’d like to be able to wear it regularly but not with the current way it seems to starve me for air as has happened to you.

I’ll give another FFM a try!!

Thanks

Pat