Squeaky Mask?

CGH · Post by **CGH** » Sat Dec 30, 2006 10:49 pm

I am using a Fisher & Paykel Flexifit mask. I have only been using the CPAP machine for 1 month or so. I have noticed at night that when I turn the two swivel joints on the front of the mask squeak. I have been putting the mask swivel joints under a stream of water to lubricate them before going to bed but through the night the water evaporates and the mask will begin squeaking again. It isn't real bad but does wake me up from time to time. Has anyone run across this and what did you do to resolve the squeak OR did you just live with it?!!!
Thanks,
Chris

OwlCreekObserver · Post by **OwlCreekObserver** » Sun Dec 31, 2006 6:09 am

I have the same problem with the Respironics Comfort Classic. There are plenty of lubricants that would probably stop the squeak but I'm afraid that anything I'd use might emit potentially dangerous particulates into the air that I'd be breathing. I'd certainly welcome recommendations for a safe plastic lubricant.

OCO

Julie · Post by **Julie** » Sun Dec 31, 2006 6:16 am

Why not just call the company and ask them about it? They have a website.

myboards · Post by **myboards** » Sun Dec 31, 2006 7:22 am

How about a touch of vaseline? take the swivel apart and very lightly lubricate only the surface where the plastic rubs together. Should work and would be safe.
Dave

lvwildcat · Post by **lvwildcat** » Sun Dec 31, 2006 12:47 pm

A tiny dab of vasoline should do the trick. You probably wouldn't need much to stop the annoying squeak

jrfoster · Post by **jrfoster** » Sun Dec 31, 2006 10:43 pm

My Fisher and Paykel mask squeaks also, but only when I whip the hose above me head as I turn over, and then every once in awhile to make sure the hose isn't blocking the vents. It usally isn't really loud in my case. I'm not sure about the vaseline answer, but the FP website will respond to questions if you ask them. They did for me in less that 2 working days.

Jeff

nomad · Post by **nomad** » Sun Dec 31, 2006 10:44 pm

I use a dab of olive oil.

ColoradoDreamer · Post by **ColoradoDreamer** » Mon Jan 01, 2007 12:42 am

I apply a very small amount of blistex to it when mine squeaks. Handy at the night table. Just apply once between cleanings. Works great for me!

NeurosurgeryNP · Post by **NeurosurgeryNP** » Mon Jan 01, 2007 7:52 pm

KY jelly - it is water based and will not leave any residue once evaporated.

Runny · Post by **Runny** » Fri Jan 05, 2007 8:56 pm

The KY Jelly was a solution for me. I put it on the inside of the swivel joints. Thanks for the great tip!

omnisleep · Post by **omnisleep** » Fri Jan 05, 2007 10:01 pm

ColoradoDreamer wrote:I apply a very small amount of blistex to it when mine squeaks. Handy at the night table. Just apply once between cleanings. Works great for me!

I was also going to add that chapstick works well also.

Fredman · Post by **Fredman** » Fri Jan 05, 2007 10:42 pm

I have the same problem. I am using a Mirage Activa mask and the swivel squeaks as well.T I think all of the solutions here sound good. KY may be the least possible of causing damage, but it will probably dry out through the night as opposed to the vaseline which should stay quite viable for a long long time until you clean the mask.

Mask

Additional Comments: Machine:Resmed S7 Elite; Oracle Mask(YES! My DREAM mask!!)