Help I Need to Sleep ASAP!!

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
MattL
Posts: 23
Joined: Fri Nov 29, 2019 8:12 am

Re: Help I Need to Sleep ASAP!!

Post by MattL » Sun Dec 01, 2019 7:47 am

OK I downloaded the Clinical Manual.

Now I'm trying to figure out mask sizing. I'm a small guy with a small head. LOL

User avatar
Dog Slobber
Posts: 4220
Joined: Thu Feb 15, 2018 2:05 pm
Location: Ontario, Canada

Re: Help I Need to Sleep ASAP!!

Post by Dog Slobber » Sun Dec 01, 2019 8:17 am

One of the best masks to start with, especially if one is self managing without the benefit of a fitting, is the ResMed P10
  • One of the cheapest masks available.
  • Right now, $79 at our sponsor
  • The starter pack comes with 3 sizes of Nasal Pillows
  • Strap size fits a broad range of head sizes
  • It's very minimal, and doesn't contribute to claustrophobia.
  • Its a very popular mask
https://www.cpap.com/productpage/resmed ... k-headgear

Nasal Masks are typically more expensive, more sensitive to leaks and comfort.

Full-face masks even more more expensive, and more sensitive to leaks and comfort as well.

centrum
Posts: 42
Joined: Tue Aug 27, 2019 8:21 am

Re: Help I Need to Sleep ASAP!!

Post by centrum » Sun Dec 01, 2019 9:43 am

MattL, I like your motivation and I hope that you will have the expected success. The P10 suggested by Dog Slobber is the perfect choice to start especially as you are a side sleeper. As you begin, one of the most common problems among cpap users is leaks through the mouth. It harms treatment, causes dry mouth, nasal congestion, fatigue because the treatment becomes ineffective, etc ... For me the only effective solution is the mouth taping. By searching on the forum, you will find other solutions like cervical collar, mouth piece, etc ... Good luck

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: Bleepdreamport CPAP mode,pressure 12.8 , ClimateLineAir heated tube 30 degrees C humidity 4, mouth taping all the time

MattL
Posts: 23
Joined: Fri Nov 29, 2019 8:12 am

Re: Help I Need to Sleep ASAP!!

Post by MattL » Sun Dec 01, 2019 10:15 am

centrum wrote:
Sun Dec 01, 2019 9:43 am
MattL, I like your motivation and I hope that you will have the expected success. The P10 suggested by Dog Slobber is the perfect choice to start especially as you are a side sleeper. As you begin, one of the most common problems among cpap users is leaks through the mouth. It harms treatment, causes dry mouth, nasal congestion, fatigue because the treatment becomes ineffective, etc ... For me the only effective solution is the mouth taping. By searching on the forum, you will find other solutions like cervical collar, mouth piece, etc ... Good luck

Thank you. I'm motivated because I haven't had more than 4-5 hours of sleep per night in months and i am becoming dysfunctional. Hence my thread title.

MattL
Posts: 23
Joined: Fri Nov 29, 2019 8:12 am

Re: Help I Need to Sleep ASAP!!

Post by MattL » Sun Dec 01, 2019 10:30 am

Dog Slobber wrote:
Sun Dec 01, 2019 8:17 am
One of the best masks to start with, especially if one is self managing without the benefit of a fitting, is the ResMed P10
  • One of the cheapest masks available.
  • Right now, $79 at our sponsor
  • The starter pack comes with 3 sizes of Nasal Pillows
  • Strap size fits a broad range of head sizes
  • It's very minimal, and doesn't contribute to claustrophobia.
  • Its a very popular mask
https://www.cpap.com/productpage/resmed ... k-headgear

Nasal Masks are typically more expensive, more sensitive to leaks and comfort.

Full-face masks even more more expensive, and more sensitive to leaks and comfort as well.
Unfortunately I don't have a prescription.

User avatar
Dog Slobber
Posts: 4220
Joined: Thu Feb 15, 2018 2:05 pm
Location: Ontario, Canada

Re: Help I Need to Sleep ASAP!!

Post by Dog Slobber » Sun Dec 01, 2019 10:35 am

Consider second hand.

A fair amount of people sell masks on buy/sell sites, often unused or unopened.

User avatar
LoneStar
Posts: 187
Joined: Wed Mar 11, 2009 1:35 pm
Location: south central Texas

Re: Help I Need to Sleep ASAP!!

Post by LoneStar » Sun Dec 01, 2019 10:41 am

Another thing you can do without a prescription (Rx) is buy a mask in parts. I often buy replacement parts for my mask on Amazon or eBay. You don't need a Rx to do that.

You can go to an online CPAP shop (like our host, for example) and learn about the parts available for masks.

I usually don't need an entire new mask when replacing parts. I might need the nasal pillows or "face" straps before I need new headgear. The short hose that goes from my mask to the long hose I've been using for five years. This is a way to save $$$.

Lisa

_________________
Machine: Airsense 10 Card to Cloud
Mask: Nuance & Nuance Pro Nasal Pillow CPAP Mask with Gel Nasal Pillows
Humidifier: HC150 Heated Humidifier With Hose, 2 Chambers and Stand
Additional Comments: APAP, humidifier on passover, heated hose
With xPAP therapy, do or do not; there is no try.

MattL
Posts: 23
Joined: Fri Nov 29, 2019 8:12 am

Re: Help I Need to Sleep ASAP!!

Post by MattL » Sun Dec 01, 2019 11:01 am

I just noticed the used machine I ordered says Escape on it but not Autoset. Since I'm new and know very little,can you guys confirm that the unit I ordered has Autoset? Thanks!!

Here are a couple photos -
66461782_503684010401971_647939582318346240_o.jpg
66461782_503684010401971_647939582318346240_o.jpg (70.53 KiB) Viewed 1129 times
66087968_503684017068637_8148576923665039360_o.jpg
66087968_503684017068637_8148576923665039360_o.jpg (62.98 KiB) Viewed 1129 times

nanwilson
Posts: 3463
Joined: Tue Apr 13, 2010 10:35 am
Location: Southern Alberta

Re: Help I Need to Sleep ASAP!!

Post by nanwilson » Sun Dec 01, 2019 11:09 am

Sorry Matt, but you show an ESCAPE on the very last picture. If you don't have it in your own hands yet, don't buy it.
Good luck
Nan
Started cpap in 2010.. still at it with great results.

D.H.
Posts: 3532
Joined: Sun Sep 04, 2016 7:07 pm

Re: Help I Need to Sleep ASAP!!

Post by D.H. » Sun Dec 01, 2019 11:13 am

I use the Comfort Gel nasal mask. It get a 100% seal on most nights, and high nineties once in a while.

The caveat is that this is a good fit for my face, not necessarily yours.

However, I think that you might want to try on the rests on the forehead (like mine). That might be a better fit.

_________________
MachineMask
Additional Comments: Auto PAP; 13.5 cmH2O min - 20 cmH2O max

User avatar
Pugsy
Posts: 65078
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: Help I Need to Sleep ASAP!!

Post by Pugsy » Sun Dec 01, 2019 11:15 am

It's not even an Escape Auto which at least has a smidgen of data available..

It is NOT an AutoSet and it doesn't even offer a smidgen of data to help you evaluate any results.

It's a bare bones basic no data brick fixed cpap only machine.

You don't want this model machine for DIYing things unless you are prepared to go just on how you feel without any data to help you out.
I don't advise it for DIYing and self diagnosis or self treatment at all.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

MattL
Posts: 23
Joined: Fri Nov 29, 2019 8:12 am

Re: Help I Need to Sleep ASAP!!

Post by MattL » Sun Dec 01, 2019 11:33 am

Thanks again.

I paid via Paypal and with my credit card. They have not shipped it yet. I'm trying to cancel the order today.

Here is the title of the listing -

ResMed S9 AutoSet & H5I heated Humidifier with Carry Bag and SD Card Includes: Power Adapter

MattL
Posts: 23
Joined: Fri Nov 29, 2019 8:12 am

Re: Help I Need to Sleep ASAP!!

Post by MattL » Sun Dec 01, 2019 11:40 am

Pugsy wrote:
Sun Dec 01, 2019 11:15 am

You don't want this model machine for DIYing things unless you are prepared to go just on how you feel without any data to help you out.
I don't advise it for DIYing and self diagnosis or self treatment at all.
Agreed. I absolutely need data.

The risks of buying used online. I have screenshots so I can do a Paypal dispute if they don't refund me. If that doesn't work I used a credit card through Paypal so I have back up.

Pain in the butt!!

User avatar
Dog Slobber
Posts: 4220
Joined: Thu Feb 15, 2018 2:05 pm
Location: Ontario, Canada

Re: Help I Need to Sleep ASAP!!

Post by Dog Slobber » Sun Dec 01, 2019 11:54 am

On a somewhat related note, when buying used, always ask for and then verify the run hours.
  • I had one guy try to sell me a used AirCurve 10 VAuto, he claimed was "2 years old, and should be around 1000 hours". When I instructed him how to get the hours he then admitted is had 10927.

    At 8 hours a night, that's almost 4 years.

    A lot of people don't know the devices track hours, so you need to tell them how to get find it.

    At that point the price changed from $400 (CDN) to $150. But, I could not trust hm any more.

MattL
Posts: 23
Joined: Fri Nov 29, 2019 8:12 am

Re: Help I Need to Sleep ASAP!!

Post by MattL » Sun Dec 01, 2019 11:55 am

Meanwhile I will look for another one. Will it say Autoset on the top of the unit?