Noob with questions ...Mirage Liberty, Amara View, AirFIT 20
- Flyoverguy
- Posts: 9
- Joined: Mon Jan 12, 2015 3:50 pm
Re: Noob with questions ...Mirage Liberty, Amara View, AirFIT 20
I have been using the Amara for a few weeks and like it. I was using a Quattro fx previously and it was fine but I was getting leaks from time to time which made all sorts of noise the wife did not appreciate. The Amara seems to seal very nicely for me and despite my side sleeping does very well throughout the night.
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
| Additional Comments: Sleepyhead |
Re: Noob with questions ...Mirage Liberty, Amara View, AirFIT 20
Awsome thanks I'll talk to the Dr, and see if I can put some "Pressure" on him...Pugsy wrote:If the pressure is up around 15 when you are having difficulties then you might be a good candidate for a bilevel machine because it offers more than the 3 cm PS difference that you get with using EPR at the max of 3. Some people just do better with the PS (difference between inhale and exhale) being 4 or 5 and even though numerically there's not a lot of difference between 3 and 4...how it feels differently is huge.
I am now... last night, it did extend my time an hour or so, but i never really settled back down. Once i'm up i seem to be up.Pugsy wrote:Do you restart the machine in the middle of the night so that the pressure drops back down and starts the ramp again at the lower starting pressure?
Which report is saying the typical pressure is 15? Where are you seeing this number?
I just installed on my Mac, but I don't have a card reader so I can't import from my machine yet, one of today's chores i guess hahaPugsy wrote: you using the software to see exactly where the pressure is when you wake up? If not, get it. Don't know about it?
https://sleep.tnet.com/equipment
Why only 4 to 5 hours of sleep? Wake up when the pressure is high and can't go back to sleep? Wake up and take the mask off and go back to sleep?
Do you have any known lung issues that might make it harder to exhale....COPD, Asthma, etc?
My 4-5 hours of sleep, yep. Just cant seem to drift back off after i'm awoken from the pressure.... cheek blowing was bad last night.
I tried without the mask after awoken and even then maybe for 30 min more but once I'm up i seem to be up. No COPD or Asthma, I do smoke, which I'm working on.... it's all a lot to take on at once. I've made a few attempts to quit and will I'm back at it again!
Thank Flyover guy!, I do side sleep a bit. Usually start off on my back and may roll from time to time.
Good to hear that the Amara is working for you in this way!
Thanks everyone
Trying to figure this CPAP thing out !!
Re: Noob with questions ...Mirage Liberty, Amara View, AirFIT 20
Pugsy wrote:
Are you using the software to see exactly where the pressure is when you wake up? If not, get it. Don't know about it?
https://sleep.tnet.com/equipment
OK got my report... should I post here so elsewhere, i thought i read someone it should be posted someplace specific.
I did read through some of the tutorial hints as well but still would like someone give thoughts.. what should I post?
Trying to figure this CPAP thing out !!
Re: Noob with questions ...Mirage Liberty, Amara View, AirFIT 20
See this thread for examples of what we would like to see in the your reports.
viewtopic/t103468/Need-help-with-screen-shots.html
We don't need all the graphs that SH gives...just the basics and if we need something else we will ask for it.
How to insert images
https://sleep.tnet.com/reference/tips/imgur
How to organize ...3 pages...be sure to read all 3 pages
https://sleep.tnet.com/resources/sleepyhead/shorganize
Just put the image of the report in this thread for right now until we see if reviewing reports is going to be a long term thing or not.
Might create a new thread later if needed.
viewtopic/t103468/Need-help-with-screen-shots.html
We don't need all the graphs that SH gives...just the basics and if we need something else we will ask for it.
How to insert images
https://sleep.tnet.com/reference/tips/imgur
How to organize ...3 pages...be sure to read all 3 pages
https://sleep.tnet.com/resources/sleepyhead/shorganize
Just put the image of the report in this thread for right now until we see if reviewing reports is going to be a long term thing or not.
Might create a new thread later if needed.
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: Noob with questions ...Mirage Liberty, Amara View, AirFIT 20
WOW, You all really have made this easy for noobs !!
Ok here ya go. Below are two snapshot.
This 1st is one where i was having a bad time getting through the night
The 2nd one was a few nights ago, felt better in the morning this time, can't wait to see what last night was because i feel great this morning

I've was using my Fit20 both nights
Ok here ya go. Below are two snapshot.
This 1st is one where i was having a bad time getting through the night

The 2nd one was a few nights ago, felt better in the morning this time, can't wait to see what last night was because i feel great this morning

I've was using my Fit20 both nights
Trying to figure this CPAP thing out !!
-
JoeRH
Re: Noob with questions ...Mirage Liberty, Amara View, AirFIT 20
Have you tried the Amara View small cushion? My nose falls right between small and medium. I tried a medium cushion and had temperamental leaks every night. Switched to small. It fits and seals around my nose much better. No leak issues at all.
- Sleeping Ugly
- Posts: 146
- Joined: Sat Sep 02, 2017 8:59 am
Re: Noob with questions ...Mirage Liberty, Amara View, AirFIT 20
This shows how everyone is so different! I had an Amara View for my first mask and I HATED it! I found it hideously uncomfortable and it has a very rigid piece inside the mask that pushed very hard on both sides of my face right under my nose. I agree with a review on youtube by LankyLefty where he says, "it appears to be made out of some kind of brick material." LOL.Flyoverguy wrote:I have been using the Amara for a few weeks and like it. I was using a Quattro fx previously and it was fine but I was getting leaks from time to time which made all sorts of noise the wife did not appreciate. The Amara seems to seal very nicely for me and despite my side sleeping does very well throughout the night.
Everyone is so very different in their preferences and so I think almost all of us here have gone through the "Goldilocks Method" of trying masks.
_________________
| Machine: DreamStation Auto CPAP Machine |
| Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
| Humidifier: DreamStation Heated Humidifier |
CPAP Therapy: providing restful and restorative sleep, while making you LOOK like you haven't had ANY! --me





