So after going back to the sleep clinic with increased fatigue, I was sent home with an s9 auto set, to see what my pressures look like in the next 4 weeks, to see if my pressure needs to be set higher on my usual [brick] cpap, or I need a different machine altogether.
As far as I can see this machine should be data capable? I assume it's the same card from my original machine, which worked fine. Now, the computer doesn't even recognise a storage device so sleepy head can't find it.
Any ideas.... do you think the card or card reader could be btoken? Don't think I gave another sd card just now to test. Or is it possible the card us only set to work on the hospital system? Don't want to get back and find these 4 weeks have been wasted.
sleepy head can't find card
6 posts
• Page 1 of 1
-
Diamondminek
- Posts: 100
- Joined: Mon Sep 14, 2015 11:30 am
sleepy head can't find card
_________________
| Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
| Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Re: sleepy head can't find card
Try a different card reader, or different computer to verify, but it should work fine.
_________________
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
| Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
| Additional Comments: CMS50F PulseOx, Sleepyhead |
Re: sleepy head can't find card
Definitely try a different card reader first.
Roger
Roger
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
| Additional Comments: I also have a AirStart 10 |
Moderate to Severe Sleep Apnea
Airsense 10 Autoset AirStart 10 CPAP
Mirage Quattro Full Face Mask
Roger
Airsense 10 Autoset AirStart 10 CPAP
Mirage Quattro Full Face Mask
Roger
-
ClayL
- Posts: 369
- Joined: Mon Feb 12, 2007 8:45 am
- Location: Palisade, CO now, was Full time in a motor home for 12 years- Anywhere USA
Re: sleepy head can't find card
Every so often I have to very gently use a rubber eraser on the gold tabs on the card to get the computer to see it.
_________________
| Mask: DreamWear Full Face CPAP Mask with Headgear (Small and Medium Frame Included) |
Respironics DreamStation
Pressure = 11.5 min 14.5 max
C-Flex = 1
Dreamwear FF
Pressure = 11.5 min 14.5 max
C-Flex = 1
Dreamwear FF
-
Sir NoddinOff
- Posts: 4190
- Joined: Mon May 14, 2012 5:30 pm
- Location: California
Re: sleepy head can't find card
If you have a digital camera (especially an older one) you might have an SD card in it that you can use to test your PC's card reader.Diamondminek wrote:Don't think I gave another sd card just now to test.
_________________
| Mask: AirFit™ F10 Full Face Mask with Headgear |
| Additional Comments: Sleepyhead software v.0.9.8.1 Open GL and Encore Pro v2.2. |
I like my ResMed AirFit F10 FFM - reasonably low leaks for my ASV therapy. I'm currently using a PR S1 AutoSV 960P Advanced. I also keep a ResMed S9 Adapt as backup. I use a heated Hibernite hose. Still rockin' with Win 7 by using GWX to stop Win 10.
-
Diamondminek
- Posts: 100
- Joined: Mon Sep 14, 2015 11:30 am
Re: sleepy head can't find card
Thansk everyone for the suggestions... i managed to get hold of a camera to read the card. and OH MY GOD THE DATA!!!! pretty sure they can pry this out my cold dead hands...
so i am off to spend some time analysing my results, and will share if needed!
xx
so i am off to spend some time analysing my results, and will share if needed!
xx
_________________
| Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
| Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
6 posts
• Page 1 of 1