Looking for clinician's manual for F&K HC234

hidingout928 · Post by **hidingout928** » Mon Aug 14, 2006 9:11 pm

I'm looking for the clinician's manual for an F&K HC234. Anyone able to assist?

Thanks in advance.

Jimm · Post by **Jimm** » Mon Aug 14, 2006 10:25 pm

I don't have a copy of the manual but here's what someone else posted as instructions to change the settings. I saved a copy in case I ever needed it but I forgot to save the username of the original poster.

- Turn on the HC234.
- Enter programming mode by holding down the "RAMP" (top) button and the "Next" (Right arrow/bottom button) for three seconds.
- The first screen will allow you to set adjust altitude, which is indicated by a drawing of a mountain range on the screen. You can change this to "m" for meters or "ft" for feet by pressing the Up or Down keys. Press the Right Arrow key to allow changing the altitude setting.
- Press the "NEXT" (Right arrow/bottom button) to advance to pressure setting which will be indicated by the characters "cm h20 " on the screen. Use the Up and Down keys to change the pressure setting.
- Lastly, push that bottom button again to exit programming mode.

Hope this helps.

Guest · Post by **Guest** » Tue Aug 15, 2006 5:20 am

Thanks a bunch. I'll give that a try.

Guest · Post by **Guest** » Tue Aug 15, 2006 5:22 am

Jimm:
That did the trick. Thanks for your help.