Airsense Software Upgrade Out Now
-
- Posts: 87
- Joined: Sun Jan 25, 2015 4:14 pm
Re: Airsense Software Upgrade Out Now
That's true.
I took a chance to connect periodically based on the reports of other post-ers, who reported that upgrades happened the first time connected to the network. Small sample size...
I took a chance to connect periodically based on the reports of other post-ers, who reported that upgrades happened the first time connected to the network. Small sample size...
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Quattro™ Air Full Face Mask with Headgear |
Re: Airsense Software Upgrade Out Now
How do I know if I received an upgrade? My humidifier won't work now for some reason. I just checked the software and have version SX 556-0204 (Humidifier only) SW-SX567-0302 (I assume is the main unit software??)
Mine was brand new in February, and has been working perfectly until the last 2 nights. I always keep it on and connected to big brother...
Mine was brand new in February, and has been working perfectly until the last 2 nights. I always keep it on and connected to big brother...
- TangledHose
- Posts: 862
- Joined: Wed Mar 13, 2013 11:13 am
- Location: Centennial, CO
Re: Airsense Software Upgrade Out Now
Tripacer,
Sounds like you have the latest humidifier software, the upgrade changed the lat four numbers from 0202 to 0204
I'd try the unplugging of your power to see if your humidifier resets, then maybe go into options and try the warm up cycle and see if it works. If the humidifier heater plate gets warm, then it's working.........after it's been running for a few minutes you can pull the water tub out and feel the metal plate for heat.
Sounds like you have the latest humidifier software, the upgrade changed the lat four numbers from 0202 to 0204
I'd try the unplugging of your power to see if your humidifier resets, then maybe go into options and try the warm up cycle and see if it works. If the humidifier heater plate gets warm, then it's working.........after it's been running for a few minutes you can pull the water tub out and feel the metal plate for heat.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Simplus Full Face CPAP Mask with Headgear |
Additional Comments: Also own F&P Icon Auto for backup and travel; and a Transcend when packing space is limited |
Link to Sleepyhead:
http://sleepfiles.com/SH2/
http://sleepfiles.com/SH2/
Re: Airsense Software Upgrade Out Now
i also have the same SW and humidifier #, i bought my machine a few weeks ago zero hrs (not thru DME or online retailer but privately) and have never had it out of airplane mode. the humidifier works fine with that version. the serial number starts with 2315; though im not sure what country 23 designates.Tripacer wrote:How do I know if I received an upgrade? My humidifier won't work now for some reason. I just checked the software and have version SX 556-0204 (Humidifier only) SW-SX567-0302 (I assume is the main unit software??)
Mine was brand new in February, and has been working perfectly until the last 2 nights. I always keep it on and connected to big brother...
Re: Airsense Software Upgrade Out Now
Wow, green with envy. Software upgrades from ResMed. Very nice product enhancement.
For us older machine users, is there any guidance as to how we might go about finding firmware updates for the ResMed S9 product line? I'm not finding much via the search bar.
For us older machine users, is there any guidance as to how we might go about finding firmware updates for the ResMed S9 product line? I'm not finding much via the search bar.
_________________
Mask: DreamWear Nasal CPAP Mask with Headgear |
Additional Comments: Machine: AirCurve 10 ASV (37043), Software:ResScan 5.7.0.9477, SleepyHead V1.00BETA2, Oximeter:CMS-50i |
Machine: AirCurve 10 ASV, Mask: AirFit N30i
PulseOx Data-transfer to OSCAR4-23-12http://tinyurl.com/nzd64gu
Wireless SD Card Data-transfer to OSCAR 8-14-15http://tiny.cc/z1kv8x
PulseOx Data-transfer to OSCAR4-23-12http://tinyurl.com/nzd64gu
Wireless SD Card Data-transfer to OSCAR 8-14-15http://tiny.cc/z1kv8x
Re: Airsense Software Upgrade Out Now
Basically there are none. The only way you could get a firmware update is if your machine goes into a service center and they happen to do that.Papit wrote:Wow, green with envy. Software upgrades from ResMed. Very nice product enhancement.
For us older machine users, is there any guidance as to how we might go about finding firmware updates for the ResMed S9 product line? I'm not finding much via the search bar.
The over the air updates for the Airsense and Aircurve 10 line is a new feature.
Current Settings PS 4.0 over 10.6-18.0 (cmH2O) - Resmed S9 VPAP Auto w/h5i Humidifier - Quattro Air FFM
TNET Sleep Resource Pages - CPAP Machine Database
Put your equip in your Signature - SleepyHead v1.0.0-beta-1
Kevin... alias Krelvin
TNET Sleep Resource Pages - CPAP Machine Database
Put your equip in your Signature - SleepyHead v1.0.0-beta-1
Kevin... alias Krelvin
- Denial Dave
- Posts: 1335
- Joined: Wed Sep 19, 2012 6:45 am
- Location: Connecticut
Re: Airsense Software Upgrade Out Now
I've seen way too many apps & operating systems go through simple upgrades and the machines get "bricked" / inoperable as a result of that simple upgrade.
There's no way I'd allow random firmware upgrades onto my machine without being able to verify that it will continue to work once it is installed.
There's no way I'd allow random firmware upgrades onto my machine without being able to verify that it will continue to work once it is installed.
_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Started at VPAP pressure setting of 20/14.4. I've survived Stage 1 cancer and lost 80+ lbs. Pressure is now 14.5 / 11 |
if you don't know where you are going... any road will take you there.... George Harrison
Re: Airsense Software Upgrade Out Now
Points well taken. Thanks.
_________________
Mask: DreamWear Nasal CPAP Mask with Headgear |
Additional Comments: Machine: AirCurve 10 ASV (37043), Software:ResScan 5.7.0.9477, SleepyHead V1.00BETA2, Oximeter:CMS-50i |
Machine: AirCurve 10 ASV, Mask: AirFit N30i
PulseOx Data-transfer to OSCAR4-23-12http://tinyurl.com/nzd64gu
Wireless SD Card Data-transfer to OSCAR 8-14-15http://tiny.cc/z1kv8x
PulseOx Data-transfer to OSCAR4-23-12http://tinyurl.com/nzd64gu
Wireless SD Card Data-transfer to OSCAR 8-14-15http://tiny.cc/z1kv8x
-
- Posts: 87
- Joined: Sun Jan 25, 2015 4:14 pm
Re: Airsense Software Upgrade Out Now
Is it kosher to quote from the other board? There is a post there that discusses the country code 23:Guest wrote:i also have the same SW and humidifier #, i bought my machine a few weeks ago zero hrs (not thru DME or online retailer but privately) and have never had it out of airplane mode. the humidifier works fine with that version. the serial number starts with 2315; though im not sure what country 23 designates.Tripacer wrote:How do I know if I received an upgrade? My humidifier won't work now for some reason. I just checked the software and have version SX 556-0204 (Humidifier only) SW-SX567-0302 (I assume is the main unit software??)
Mine was brand new in February, and has been working perfectly until the last 2 nights. I always keep it on and connected to big brother...
"The serial number tells place and year of manufacture:
i.e. 2211xxxxxxx
22 = Australia
23 = Singapore
11 = 2011
xxxxxxx = Serial number"
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Quattro™ Air Full Face Mask with Headgear |
Re: Airsense Software Upgrade Out Now
Is tripacer software version the latest ? I have the same. 04 for humidifier and 02 for main unit.
- StuUnderPressure
- Posts: 1377
- Joined: Mon Jun 18, 2012 10:34 am
- Location: USA
Re: Airsense Software Upgrade Out Now
Unfortunately, my wife may(???) be joining our ranks.
But, without any testing yet, I think she will be borderline at best (or is it worst).
Anywho, I have 2 ResMed S9 AutoSets.
I use 1 at my recliner & 1 in bed.
Will let her use the 1 at my bedside for "unofficial" testing.
I will use my old Respironics "tank" there until the testing is over.
If per chance she does need to go on APAP, the AirSense 10 AutoSet for Her would be her choice (my choice actually - but she feels better if I say it was her choice).
Based on this thread the current Versions as of 8-30-15 are as follows:
Machine SX 567-0302
Humidifier SX 556-0204
Internal Modem SX 558-0304
It is now 4+ months later.
Are there any more current Versions that are not reflected in this thread?
But, without any testing yet, I think she will be borderline at best (or is it worst).
Anywho, I have 2 ResMed S9 AutoSets.
I use 1 at my recliner & 1 in bed.
Will let her use the 1 at my bedside for "unofficial" testing.
I will use my old Respironics "tank" there until the testing is over.
If per chance she does need to go on APAP, the AirSense 10 AutoSet for Her would be her choice (my choice actually - but she feels better if I say it was her choice).
Based on this thread the current Versions as of 8-30-15 are as follows:
Machine SX 567-0302
Humidifier SX 556-0204
Internal Modem SX 558-0304
It is now 4+ months later.
Are there any more current Versions that are not reflected in this thread?
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Cleanable Water Tub & Respironics Premium Chinstrap |
Last edited by StuUnderPressure on Tue Jan 12, 2016 2:27 pm, edited 2 times in total.
In Windows 10 Professional 64 bit Version 22H2 - ResScan Version 7.0.1.67 - ResScan Clinician's Manual dtd 2021-02
SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html
SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html
- StuUnderPressure
- Posts: 1377
- Joined: Mon Jun 18, 2012 10:34 am
- Location: USA
Re: Airsense Software Upgrade Out Now
Been there, done that when I got my 1st S9 AutoSet.Papit wrote:Wow, green with envy. Software upgrades from ResMed. Very nice product enhancement.
For us older machine users, is there any guidance as to how we might go about finding firmware updates for the ResMed S9 product line? I'm not finding much via the search bar.
Forced my DME to give me an S9 AutoSet with more current Software Versions.
To do that, the DME would have to pay to ship the machine back to ResMed & the return shipment back to the DME.
Plus, the DME would also have to pay ResMed for its services.
The Software cannot be updated.
ResMed would change out the entire board to a board that already has the updated software.
DME would not tell me the price ResMed quoted them.
But, they did say it would be more than them just giving me a new machine - which they did.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Cleanable Water Tub & Respironics Premium Chinstrap |
In Windows 10 Professional 64 bit Version 22H2 - ResScan Version 7.0.1.67 - ResScan Clinician's Manual dtd 2021-02
SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html
SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html
- StuUnderPressure
- Posts: 1377
- Joined: Mon Jun 18, 2012 10:34 am
- Location: USA
Re: Airsense Software Upgrade Out Now
http://www.resmed.com/content/dam/resme ... dadX1-.pngInsomniacGuy wrote:Is it kosher to quote from the other board? There is a post there that discusses the country code 23:Guest wrote:i also have the same SW and humidifier #, i bought my machine a few weeks ago zero hrs (not thru DME or online retailer but privately) and have never had it out of airplane mode. the humidifier works fine with that version. the serial number starts with 2315; though im not sure what country 23 designates.Tripacer wrote:How do I know if I received an upgrade? My humidifier won't work now for some reason. I just checked the software and have version SX 556-0204 (Humidifier only) SW-SX567-0302 (I assume is the main unit software??)
Mine was brand new in February, and has been working perfectly until the last 2 nights. I always keep it on and connected to big brother...
"The serial number tells place and year of manufacture:
i.e. 2211xxxxxxx
22 = Australia
23 = Singapore
11 = 2011
xxxxxxx = Serial number"
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Cleanable Water Tub & Respironics Premium Chinstrap |
In Windows 10 Professional 64 bit Version 22H2 - ResScan Version 7.0.1.67 - ResScan Clinician's Manual dtd 2021-02
SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html
SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html
Airsense Software Upgrade Out Now
I got a For Her model on 11/30/15. The only difference in version numbers is for the modem: -0308. It stays plugged in all the time and hasn't received any updates. EarlStuUnderPressure wrote:.... Versions as of 8-30-15 are as follows:
Machine SX 567-0302
Humidifier SX 556-0204
Internal Modem SX 558-0304
:edit I recorded the numbers for my unit when I first powered it on.
_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: PAPCap, 3M Microfoam Surgical Tape, PoliGrip Strip, APAP 12.0 - 14.0 cm |
- StuUnderPressure
- Posts: 1377
- Joined: Mon Jun 18, 2012 10:34 am
- Location: USA
Re: Airsense Software Upgrade Out Now
Since your machine had the -0308 Version for the Internal Modem, you probably also already had all of the latest versions of the others - so you would not receive any updates.poppi2 wrote:I got a For Her model on 11/30/15. The only difference in version numbers is for the modem: -0308. It stays plugged in all the time and hasn't received any updates. EarlStuUnderPressure wrote:.... Versions as of 8-30-15 are as follows:
Machine SX 567-0302
Humidifier SX 556-0204
Internal Modem SX 558-0304
:edit I recorded the numbers for my unit when I first powered it on.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Cleanable Water Tub & Respironics Premium Chinstrap |
In Windows 10 Professional 64 bit Version 22H2 - ResScan Version 7.0.1.67 - ResScan Clinician's Manual dtd 2021-02
SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html
SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html