The RemStar Auto when on 12vdc power has a max current draw of 3 amps. It is only 1 amp on 120vac. Based on that a 22 amp hr battery will give you at best 7 hours at full current. Your time would increase depending on the pressure level it runs at. The lower the pressure the longer run time you coul...

I got my sleep study done by the VA. Took 3 months after my GP agreed that I needed a study until I was able to see the "sleep specialist", and after he agreed that I needed the study, took another 3 months to get in for the study. They did a split night and I left the hospital the next morning with...

Ultra Mirage Full Face since my first night of CPAP. My one and only mask. I got lucky and found my ideal mask right off the bat.

Sorry Babette, but I think the only way that modern science has found to remove the female sex drive is for her to get married .


Worked for my first 3 wives......... .

Losing the new posts on thread flag. After reading one new post and going back to the list it shows that none of the threads have new posts.

Try here to start.
http://www.aastweb.org/

From the service manual for the Remstar Pro 2/Auto


E-36
ERR_NVDATA_RANGE_FAILURE
•Defective EEPROM
•Replace Main PCA

Actually anyone that has an account with respironics as a provider can have access to the software and cabling necessary to adjust the real time clock in the unit. Because we use these units where I work, I have the software and cabling for it. When you do the RTC calibration to the unit it adjusts ...

With the new chemicals that they use for treated lumber you no longer want to use the cement coated nails. They will still rust, unless you are using untreated wood. With the older treated lumber they recommended cement coated so that they would not be destroyed by the chemicals that were used to tr...

Christy223 wrote:OK Respironics M Series Pro comes with smart card - then I have to purchase software on my own to download info. Is this correct? I just don't to get the shaft from some DME that thinks I am stupid!!!

_________________

Thats the way it works. You will also have to purchase the card reader.

E 77 indicates the pressure sensor is not putting out a signal, either because the sensor is not getting pressure applied to it or the sensor is bad. You would have to open the unit and look to ensure the tube is still connected and not blocked. If it all looks alright, it is a matter of replacing t...

E-7 is a stack overflow error. RAM is bad in machine. Have to replace the main PC board.

Probably more cost efficient to go this way.

https://www.cpap.com/productpage-advanced.php?PNum=716

I wear a beard and moustache and use the UMFF. No problem with seals. Maybe a little more leakage than some but not enough to be a problem.

Of those 10 types of people I am in the former. If you spend any time working on medical equipment you will quickly find that most equipment manufacturers have proprietary chips manufactured for their medical devices. This precludes the average tech from repairing to the component level and ensures ...

Thats the unit I use. Works great for me. Has full data capability. If you are happy using a CPAP vs an APAP, it is a very good machine.