Turns out I already had the data to show that. I am now using a F&P Micro Nova and had about a week with the mask type set to Full Face and another week with it set to Pillows. OSCAR showed more leaks with the pillows setting than with the full face setting.

By "leak calculation," does that mean it affects only the reported leaks, as leaks themselves are not an input to the desired pressure calculation? (Since I use fixed pressure, there would be even less for it to affect.) I should try each setting for a week or so and see if there is any perceptual d...

One of the settings for the ResMed series (AirCurve 10 VAuto in my case) is for the type of mask: Pillows, Nasal, Full Face. Does anyone know how this setting affects the way the machine operates? Specifically, what happens differently if using a pillows mask and the machine is set for Full Face ins...

I have now been using the F&P Nova Micro mask for about two weeks. In the past, I used a Brevida mask. At this time, I think I will stick with the Micro Nova mask although it is really pretty much of a toss-up for me. When I first used the NM mask, I thought that the medium cushion had fewer leaks a...

I have used the Brevida for some years and recently got a Micro Nova fit pack to see how it was. My first reaction on opening the package was that the cushion was amazingly small! I used the M-L cushion with the Brevida. With the Micro Nova, I found that I had to breath harder with the medium cushio...

The upside to hoarding--if there is one. :mrgreen: We are in the process of major downsizing as we try moving to an independent living apartment. Floor space is reduced rom 2000 to 1000 sq ft and there is no garage or storage space that we are used to. It's amazing how much CPAP stuff I have. Learn...

We each have a spare machine, so we always have a backup on hand. I do recommend having a spare if possible.

Good news! While looking at the PS in the wastebasket, I discovered that the fine center pin was bent. I was able to straighten it and it now works.

Power brick appears to have failed--CPAP light just flickers on when connected then is dead. With a different power supply, machine works fine. So it looks like I need a new power brick. It's expensive from CPAP suppliers but relatively cheap from various Amazon sellers. Does anyone have experience ...

When I was using distilled or reverse osmosis water, I would just top off the tank, emptying it only for cleaning. Distilled water does not create a noticeable mineral deposit; RO water produced a very thin film of minerals. With tap water, softened or not, I dump and refill daily. The reason I do t...

Are you running Windows, do you have a high-resolution monitor? That can cause a similar appearance problem on Windows. If so, go to the OSCAR Troubleshooting Wiki and see the section on "OSCAR Graphics Problems." If not a high resolution monitor, what is your screen size in pixels? (e.g., 1980/1200...

If you got the machine from a local DME, take the machine to them for repair.

The elbow has a clip on each side that attach to the mask. Are both sides clipped in properly? If you have just one clip seated and the other one is loose, you will get a lot of noise.

Thanks, PR. Looks like my SIL's machine has been adjusted. Seems odd to me with a minEPAP of 8 and PS of 6. I haven't received any data to look at, but those numbers were higher than I expected for an AHI of 22 in the sleep study. Hopefully I will get some data soon and see what is going on.

Does anyone know what the factory default settings of the ResMed AirCurve 10 VAuto are for EPAP, IPAP, and PS in VAuto mode?

I'm looking at my SIL's machine and wonder if it is still set to factory defaults.

Thanks!