Because of COVID I haven't been able to hug my grandchildren for several months - Intolerable situation - right! So As an engineer I should be able to engineer a solution I'll simply completely wrap myself in disposable plastic - Problem solved YIKES except for the side effect of suffocating after t...

Can you send me a procedure for calibration (I am a Medical Engineer and should be able to follow the procedure accurately) A number of links to help you check your machine's output calibration. Den . http://www.cpaptalk.com/viewtopic.php?f=1&t=4506&p=37259&hilit=homemade+manometer#p37259 http://ww...

The function worked fine for a long time and then stopped functioning Smart start is NOT working with a full face mask as well as with pillows I have another Air Sense 10 and the smart start function works fine with both the pillows and the full face mask My settings are 4 for the starting pressure ...

I have an out of warranty machine where the autostart function doesn't work. I would like basic dissembly instruction instructions and a good block diagram

Does anyone know where I can get the ResMed Air Sense 10 Service Manual (how to do maintenance and repairs)

Had the same problem - decided to obey the laws of physics - I adjusted the humidity level and tube temperature until I achieved settings that were comfortable without popping

I have a full beard and full mustache. Logically I started off with nasal pillows (ResMed P10). Unfortunately several times a night my mouth was blown open with unpleasant results. I briefly considered using a chin strap but was frightened off by the possibility of suffocation should the CAP machine...

Thanks for the advice - Here is what I did: With the SD card in the machine I entered the clinical menu and selected "Erase Data" and then confirmed that I actually wanted to do it. The machine erased the data and reformatted the SD card. I was then able to enter the correct date and time I am pleas...

Thanks for the advice - Here is what I did: With the SD card in the machine I entered the clinical menu and selected "Erase Data" and then confirmed that I actually wanted to do it. The machine erased the data and reformatted the SD card. I was then able to enter the correct date and time I am pleas...

For some reason the date in my machine got set to tomorrow's date. When I try to set it back to today's date it gives me a message that says that I cant set a date in the past

HELP!! please

I wipe the outside with a towel and hang it up for about 1 minutes - works fine

I have only used one full face mask - ResMed F10. I find it quiet and comfortable

dtsm wrote: I do change it once every 8-10 (arbitrary) months as they're super inexpensive.

The climateline hose costs $40.00 - I wouldn't call that super inexpensive

What is in the hose that you are trying to clean. The only thing that flows through that hose is filtered air passing over distilled water.(assuming you are using distilled water). I am cleaning the hose because ResMed says to clean it. They know a lot about this topic and there is no advantage to ...

The ResMed Climateline Hose is 1.9 meters in length. The tube cleaning brush I purchased from CPAP.com is 1.5 meters in length. For a normal hose this is not a problem because you use the brush from one end of the tube and then use it from the other end thereby covering the entire tube length with o...