I use the TENS unit for back pain relief. Medicare and supplimental insurance cover the cost of the unit and the supplies such as electrode pads.

Does anybody have any recommendations for a DME supplier online for TENS electrodes, who accepts Medicare?

Thank you very much!

Is there an included, optional or even third party remote just for starting and stopping the Resmed 11. I am about to get Resmed 11. Currently I use Resmed 10 autoset. Yes, it does have auto start and stop based on mask wearing or removal. But the autostop practically does not work here, when at hig...

I am a very long term member returning here occasionally. I tried to search but could not find an answer.

Is the Resmed AirSense 10 heated tube usable in ResMed 11? Or the type of heated tubes used in the two models different?

[An old member, now not active, returning for help] My Resmed AirSense 10 used to auto start when I put on the mask, and auto stop when I remove it. For some reason it does not auto stop anymore. I only see one setting for both on and off, which is enabled. I cannot reach my machine from where I sle...

I am posting this to help a friend. I have been using the Resmed Airsense 10 auto set for a couple of years. I can lookup the day's AI, AHI and Central by scrolling down the screen (data display set for 1 day). I have a friend who has the same machine. But his machine does not show the above values....

rebelrider.mike, Very cool!! Excellent valuable post. BTW, the Resmed Airsense S10 dc connector has outside 0.3" and inside cylinder (24v) 0.2" (measured with a caliper). Cannot measure the pin diameter. 1. Do you know the electronic part number of the above connector, and its mating connector you h...

palerider, thank you.

I found the other thread where somebody is doing a DIY backup. He seems to use both the male and female connectors. I asked in that thread. Thanks again.

Sorry, something unexpected happened with my last post. rebelrider.mike, I thought I was posting to your thread where you have many photos of your backup power supply project. But I see now I ended up on another thread. Just FYI, I am referring to items in your slightly earlier another thread.

rebelrider.mike, Very cool!! Excellent valuable post. BTW, the Resmed Airsense S10 dc connector has outside 0.3" and inside cylinder (24v) 0.2" (measured with a caliper). Cannot measure the pin diameter. 1. Do you know the electronic part number of the above connector, and its mating connector you h...

palerider, thank you very much for volunteering that info about notebook computer connectors similarity. If you can please find out one of your notebook connectors matching the resmed one, let me know the notebook model number. A verification method would be 1. to plug in the resmed plug (WITH AC PO...

I was wrong. On a second closer inspection of the coaxial battery connector, I found it has 3 terminal. So most likely it uses similar to the S9 scheme with a 3.3 volts on one of the pins... The outer diameter is 0.3". The inner diameter is 0.2" with a central pin (unknown diameter). Connector model...

Sorry, I visit here now very rarely. Unlike the S9 with a 3 pin power connector (which needed a special 3.3 volt on the third pin for an external battery to work), the Resmed Airsense S10 appear to have a simple two pin power connector. 1. Does anybody know if a 24v battery can be simply connected f...

This is for resmed S10 I recently traveled to India and back with S10. The clock can be changed backwards also, (as when I got back home to usa) but needs patience. Usually you can change the minutes or hours back a little bit at a time. So a couple of hours after you get up, you can change it back ...

Is it possible the AHI s10 shows on the screen (summary) is not just for the last night (which was the case for S9) but for the average of some number of nights... I need to check the manual... I am pressed for time, since I am getting ready to make a trip to the other side of the globe... I believ...