good morning,
I have a new machine and have the instructions how to set the autopart. My order is for CPAP 12 with CFlex 3 or 4. Can anyone give me advice on how to set my machine with similar settings for auto?
thanks in advance,
Connee
Resmed Autoset II how to set
-
- Posts: 12
- Joined: Thu Aug 19, 2010 5:36 pm
- Location: Central IL
Re: Resmed Autoset II how to set
I'm assuming C-flex is like EPR? I would suggest starting at: EPR 3, apap range 12-20, then tweak EPR settings (for comfort) after a few days. You might EPR 2 or 1 works just as fine. Then after determining final EPR, you can narrow apap band accordingly.
- rested gal
- Posts: 12881
- Joined: Thu Sep 09, 2004 10:14 pm
- Location: Tennessee
Re: Resmed Autoset II how to set
Nurse, your equipment profile says you have a ResMed machine. But you said your prescription mentions setting "C-Flex."
ResMed machines use "EPR" for exhalation relief.
Respironics (and Philips Respironics) machines use "C-Flex" and "A-Flex" for exhalation relief.
Is your machine a ResMed S8 Autoset II? If so, there is no setting in the menu for "C-Flex." There is a setting for "EPR."
The range dtsm suggested of 12 - 20 with EPR at whatever feels comfortable to you sounds fine to me. If you set the minimum pressure at 12 and EPR at "3" (for a 3 cm drop in pressure each time you breathe out), the minimum pressure will drop down to 9 by the end of each of your exhalations.
If you really need 12 to keep your airway open during sleep, and if 9 is not enough to keep your airway at least partially open at the end of breathing out, an apnea might be in place, preventing you from being able to get another breath started.
It helps to have the software and do your own data downloads at home, so you can see if you need more than 12 for your minimum pressure when using EPR 3, or if a 3 cm reduction is ok (which it probably will be.)
Software would make it easier to see what happens with EPR 1, 2, or 3 (for a 1 cm drop in pressure when exhaling, 2 cm drop, or 3 cm drop.) You could then adjust the EPR one way or the other, or even turn it off. Or raise the minimum pressure, if need be, to compensate for the amount of EPR drop you find most comfortable for breathing out, yet still be able to hold the airway well and truly open.
ResMed machines use "EPR" for exhalation relief.
Respironics (and Philips Respironics) machines use "C-Flex" and "A-Flex" for exhalation relief.
Is your machine a ResMed S8 Autoset II? If so, there is no setting in the menu for "C-Flex." There is a setting for "EPR."
The range dtsm suggested of 12 - 20 with EPR at whatever feels comfortable to you sounds fine to me. If you set the minimum pressure at 12 and EPR at "3" (for a 3 cm drop in pressure each time you breathe out), the minimum pressure will drop down to 9 by the end of each of your exhalations.
If you really need 12 to keep your airway open during sleep, and if 9 is not enough to keep your airway at least partially open at the end of breathing out, an apnea might be in place, preventing you from being able to get another breath started.
It helps to have the software and do your own data downloads at home, so you can see if you need more than 12 for your minimum pressure when using EPR 3, or if a 3 cm reduction is ok (which it probably will be.)
Software would make it easier to see what happens with EPR 1, 2, or 3 (for a 1 cm drop in pressure when exhaling, 2 cm drop, or 3 cm drop.) You could then adjust the EPR one way or the other, or even turn it off. Or raise the minimum pressure, if need be, to compensate for the amount of EPR drop you find most comfortable for breathing out, yet still be able to hold the airway well and truly open.
ResMed S9 VPAP Auto (ASV)
Humidifier: Integrated + Climate Control hose
Mask: Aeiomed Headrest (deconstructed, with homemade straps
3M painters tape over mouth
ALL LINKS by rested gal:
viewtopic.php?t=17435
Humidifier: Integrated + Climate Control hose
Mask: Aeiomed Headrest (deconstructed, with homemade straps
3M painters tape over mouth
ALL LINKS by rested gal:
viewtopic.php?t=17435