Where to find Encore Analyzer software?

schnertling · Post by **schnertling** » Mon Oct 15, 2007 2:33 pm

Does anyone know where to find Encore Pro Analyzer software?

Thanks!

geoDoug · Post by **geoDoug** » Mon Oct 15, 2007 3:16 pm

schnertling wrote:Does anyone know where to find Encore Pro Analyzer software?

Ask and ye shall recieve:

http://james.istop.com/EncoreProAnalyzer/

Slinky · Post by **Slinky** » Mon Oct 15, 2007 3:18 pm

EncoreAnalyzer is the privately developed softward by JSkinner, one of our forum members. It is freeware but a donation is always appreciated for the time he put into developing it if you are pleased w/it.

Just do an "author" Search in the forum and you can PM James and ask him about a copy. It hasn't been updated to work w/EncorePro v.1.8 the last I knew.

sharon1965 · Post by **sharon1965** » Mon Oct 15, 2007 3:55 pm

It hasn't been updated to work w/EncorePro v.1.8 the last I knew.

slinky
pardon my ignorance, but in what way does it not work with 1.8? i've been running both for a couple of weeks and it seems to work, though i'm new to the data collection thing so maybe there is something i am missing...
thanks
sharon

Slinky · Post by **Slinky** » Mon Oct 15, 2007 3:57 pm

I don't know. I have a RESMED!!! But I was sure I had read that James hadn't gotten around to updating Analyzer to be compatible w/1.8 and didn't intend to since EncoreViewer was coming out specifically for patients. Maybe I'm all wet on this. PM James and ask him.

sharon1965 · Post by **sharon1965** » Mon Oct 15, 2007 4:02 pm

thanks, slinky...i can't remember if i told him i have 1.8 when i requested his software, but i will double check with him if there's anything i need to know

6PtStar · Post by **6PtStar** » Mon Oct 15, 2007 4:04 pm

Works with 1.8I.49. I think there are some problems with labels on 1.8i.65.

Jerry

sharon1965 · Post by **sharon1965** » Mon Oct 15, 2007 4:08 pm

thanks jerry

i have 1.8.49 and from my limited experience it seems to be running ok

schnertling · Post by **schnertling** » Mon Oct 15, 2007 6:02 pm

Thank ye for thou link-eth.

jskinner · Post by **jskinner** » Mon Oct 15, 2007 6:26 pm

Slinky wrote:It hasn't been updated to work w/EncorePro v.1.8 the last I
knew.

As far as I know it works pretty well with 1.8

Goofproof · Post by **Goofproof** » Mon Oct 15, 2007 9:40 pm

schnertling wrote:Thank ye for thou link-eth.

Do you have the Encore Pro software and the DT-3500 card reader? Jim

wabmorgan · Post by **wabmorgan** » Mon Oct 15, 2007 9:47 pm

I have 1.849 as well.... Analyzer works fine with it!!!!!!!!!

papdaddy · Post by **papdaddy** » Tue Oct 16, 2007 7:42 am

I have 1.8I.49 and running windows Vista. The only problem is you have to run it as admin (read notes for Vista users on download instructions) and click on regular Icon for the program. It runs very well.

Rich

jskinner · Post by **jskinner** » Tue Oct 16, 2007 8:08 am

papdaddy wrote:I have 1.8I.49 and running windows Vista. The only problem is you have to run it as admin

I hope to fix this problem sometime. The problem is that under vista is the user account doesn't have enough privilages to talk to the DB. This is because even an admin account under visita runs with user level privileges (which is a good thing) To fix this I need to either

1) Figure out what the password of the EPUser account that EP uses so I can authenticate with that. This is the prefered solution as it will just work.

2) Upon installation create a new DB account, EPAUser, so that EPA can talk to the DB without the account being in admin mode. This is not as nice solution and wont' work with accross the network EP setups.

-James

Mask

Additional Comments: Encore Pro, Encore Pro Analyzer

Machine	Mask	Humidifier

Where to find Encore Analyzer software?

Where to find Encore Analyzer software?

Re: Where to find Encore Analyzer software?