RESMED S10 4G MODEM - WANTED

I'm looking to buy a RESMED S10 4G Modem.

Unlike many of you, I actually want to have my data broadcast after each night's sleep. I used to quite enjoy perusing my stats on the RESMED site over a coffee in the morning. But after the closedown of the 2G network here in Australia, my modem can no longer "phone home". So if there is anyone out there with a 4G modem they no longer use I would be more than happy to buy it from you.

Contact me on robbie at anderson dot com dot au or PM me.

Cheers,

a little bit about this-

https://www.cpaptalk.com/viewtopic.php?t=182001

good luck!

I know the modems are trivial to remove. If your intent is to buy just the modem and swap it with your existing modem, that may not work.

With a 4G modem there might also be a firmware upgrade.

Did you ever get a solution this? ResMed told me that apparently the 4G is also compatible with 5G... This is the first I've heard of the AS10 having a 5g modem...

I have the 4g modem and can only get 1 bar (like many people), and (as ResMed will tell you) it needs to have 2 bars in order to communicate reliably and receive firmware updates... I'm curious if there is a Creative Engineer solution to amplifying the antenna on the daughter-board of the modem...

ITSecGuy wrote: ↑

Wed Nov 02, 2022 11:20 am

Did you ever get a solution this? ResMed told me that apparently the 4G is also compatible with 5G... This is the first I've heard of the AS10 having a 5g modem...

I have the 4g modem and can only get 1 bar (like many people), and (as ResMed will tell you) it needs to have 2 bars in order to communicate reliably and receive firmware updates... I'm curious if there is a Creative Engineer solution to amplifying the antenna on the daughter-board of the modem...

You need to stop believing that the first service rep that answers the phone speaks on behalf of ResMed.

4G is not upward compatible with 5G,
and no, you do NOT need 2 bars to reliably communicate to the cell system.