I have a question and hope someone can help. My machine will no longer work if the SD card is plugged in. It's the 1 GB card that came with the cpap. Question is - can I reformat it or something, or do I need a new SD card? It's really hard to find the 1 GB cards now, if it needs replaced, will a different card work?
Thank you so much for all the great information. I have learned so much from this forum over the years.
YK
SD card not workingwith Resmed S9
SD card not workingwith Resmed S9
_________________
Mask: SleepWeaver Elan™ Soft Cloth Nasal CPAP Mask - Starter Kit |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
I also have used a night guard for twelve years.
Re: SD card not workingwith Resmed S9
If you do need a new card, you can use almost any size.....pick the smallest you can find. Lots of 8GB around..some 4gb too.
http://www.ebay.com/sch/i.html?_odkw=sd ... s&_sacat=0
http://www.ebay.com/sch/i.html?_odkw=sd ... s&_sacat=0
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: Back up is S9 Autoset...... |
Re: SD card not workingwith Resmed S9
I would first read the data into Sleepyhead to store it. Then try gently cleaning the gold parts on the card and reformatting it. Also, have you tried unplugging your machine for say 10 minutes and replugging it in? This often clears electronic brain snafu. If that doesn't work, as already mentioned, you can buy any SD card - go for the smallest.
_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Sleepyhead |
Diabetes 2, RLS & bradycardia
Airsense For Her; Settings: range 8-12, Airfit P10 (M)
Airsense For Her; Settings: range 8-12, Airfit P10 (M)
Re: SD card not workingwith Resmed S9
Thanks, yes. I have tried unplugging it and it didn't help matters.
_________________
Mask: SleepWeaver Elan™ Soft Cloth Nasal CPAP Mask - Starter Kit |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
I also have used a night guard for twelve years.
Re: SD card not workingwith Resmed S9
Have you checked to make sure the write protect switch is not set on it? There's a little slider switch on the side of the card. Move it toward the flat (top) end of the card to make sure it's writable.
_________________
Machine: DreamStation Auto CPAP Machine |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Humidifier: DreamStation Heated Humidifier |
Additional Comments: Sleepyhead software |
Re: SD card not workingwith Resmed S9
The protect switch would not stop the computer from workinglinuxman wrote:Have you checked to make sure the write protect switch is not set on it? There's a little slider switch on the side of the card. Move it toward the flat (top) end of the card to make sure it's writable.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: Back up is S9 Autoset...... |
Re: SD card not workingwith Resmed S9
Well, in the broad sense, yes if I was writing the software in a cpap machine I would report an error to that effect if the card wasn't writable. That doesn't mean they did that when they designed this particular machine. It's quite possible it could just shutdown if the card wasn't writable, particular if the SD card was deemed a critical function. Yeah, it's unlikely, but quite possible.LSAT wrote:The protect switch would not stop the computer from workinglinuxman wrote:Have you checked to make sure the write protect switch is not set on it? There's a little slider switch on the side of the card. Move it toward the flat (top) end of the card to make sure it's writable.
_________________
Machine: DreamStation Auto CPAP Machine |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Humidifier: DreamStation Heated Humidifier |
Additional Comments: Sleepyhead software |