pressure adjustment

tpettigrew · Post by **tpettigrew** » Wed Jul 19, 2006 9:47 pm

Can anyone tell me how to adjust my pressure setting on my Remstar Pro 2 with C-flex. The doctor has recommended an adjustment from 11 to 13 cm of H2O but he is out of town and will not be back for three weeks. I had 298 apneic episodes on my 4th study a week ago and would like to go ahead and increase the setting. Anyone who can help would be greatly appreciated!!!

Sincerely,

Tim D.Pettigrew
pettigrewt@houston.rr.com

Ric · Post by **Ric** » Wed Jul 19, 2006 10:38 pm

unplug, hold down the two left-right buttons, keep holding, plug in, keep holding, clinician's menu will appear, let go, use the left-right buttons to scroll thru the menus, up-down to change settings:

URL: How to Change the Pressure Settings

Guest · Post by **Guest** » Thu Jul 20, 2006 8:28 am

OR.....copy and save this to a file on your computer:

REMstar Pro 2 Setup

When in the Setup Menu, the humidifier ^ and ramp v buttons operate as up and down keys to change the settings, the left/right user buttons < > allow you to go to the previous/next question or setting, and the pressure start/stop button is used to exit the Setup Menu. Holding the humidifier or ramp buttons down will cause the values to change more quickly.

To enter the Therapy Setup Menu, hold the two top user buttons < > down while plugging in the power cord.
Continue holding the buttons down until the REMstar Pro 2 with C-Flex beeps.

Note: The word "setup" will appear on all of the screens indicating that you are in the Therapy Setup Menu.
If you press the Pressure start/stop button, you will exit the Setup Menu.

a. Compliance hours: (recommend leaving alone) Select next setting with >

b. Therapy mode: (CPAP or CFLE) select with ^ or v Select next setting with >

c. CPAP pressure setting: Select with ^ or v Select next setting with >

d. C-Flex mode (if you chose CFLE mode): Select setting 1, 2 or 3 with ^ Select next setting with >

e: Ramp time setting: Select with ^ or v (ramp time will be turned off with a setting of 0) Select next setting with >

f. Ramp pressure setting: Select with ^ or v Select next setting with >

g. Patient disconnect setting: 1 = on 0 = off Select with ^ or v Select next setting with >

h. Buttons lights setting: 1 = on 0 = off Select with ^ or v (Last setting. Use On/Off button to exit Setup)

Lysander · Post by **Lysander** » Wed Jul 26, 2006 8:04 pm

Anyone know how to change the pressure on a Remstar APAP. My pressure settings are 6 to 16 and now over the course of a year I have never been above 11 and 90% of the time I am under 9. I would like to compress the range to something like 8-12.

Thanks

Wulfman · Post by **Wulfman** » Wed Jul 26, 2006 8:08 pm

I just posted this to another thread a few moments ago......but......
Copy and paste this to a file in your computer.

Den

REMstar Auto w/C-Flex Setup

When in the Setup Menu, the humidifier ^ and ramp v buttons operate as up and down keys to change the settings, the left/right user buttons < > allow you to go to the previous/next question or setting, and the pressure start/stop button is used to exit the Setup Menu. Holding the humidifier or ramp buttons down will cause the values to change more quickly.

To enter the Therapy Setup Menu, hold the two top user buttons < > down while plugging in the power cord.
Continue holding the buttons down until the REMstar Auto w/C-Flex beeps twice.

Note: The word "setup" will appear on all of the screens indicating that you are in the Therapy Setup Menu.
(If you press the Pressure start/stop button, you will exit the Setup Menu.)

A. Compliance hours/nights: (recommend leaving alone, but CAN be cleared at this point)
Select next setting with >

B. Therapy mode: (CPAP/CFLE/APAP/AFLE) select with ^ or v
Select next setting with >

B1. If CPAP or CFLE select pressure setting: Select with ^ or v
Select next setting with >

B1a. C-Flex mode (if you chose CFLE mode): Select setting 1, 2 or 3 with ^
Select next setting with >

B2a. If APAP or AFLE, select minimum pressure setting: Select with ^ or v
Select next setting with >

B2b. If APAP or AFLE, select maximum pressure setting: Select with ^ or v
Select next setting with >

B3. C-Flex mode (if you chose AFLE mode): Select setting 1, 2 or 3 with ^
Select next setting with >

C: Ramp time setting: Select with ^ or v
(ramp time will be turned off with a setting of 0)
(if using APAP or AFLE mode, Ramp setting MUST be set to 0)
Select next setting with >

D. Ramp pressure setting: Select with ^ or v (use only in CPAP or CFLE mode)
Select next setting with >

E. Patient disconnect setting: 1 = on 0 = off Select with ^ or v
Select next setting with >

F. Buttons lights setting: 1 = on 0 = off Select with ^ or v

(Last setting. Use On/Off button to exit Setup)

Lysander · Post by **Lysander** » Fri Jul 28, 2006 6:22 am

Thanks. I am new to this message board and missed your other post even though I searched. I have saved the info to my PDA. Thank you.

pressure adjustment

pressure adjustment

Changing Pressure on Remstar APAP