Machine placement on headboard
- chunkyfrog
- Posts: 34545
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: Machine placement on headboard
Toastmasters?
I wonder how many lonely people they fleece.
That is beyond sad, but pity does not make friends.
I wonder how many lonely people they fleece.
That is beyond sad, but pity does not make friends.
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
Re: Machine placement on headboard
The main problem, as mentioned, is that with humidity, you increase your risk of rainout. When I was caring for my brother, I also had a headboard bookshelf and had it higher than my head. I had to take it off AUTO and set humidity to 1-2 and it was fine. The bigger problem was pulling the machine off the headboard. I got those 3M hook thingys and made a small sleeve for my hose and it held the hose on the hooks, preventing me from yanking the poor machine off a 3rd time. Getting hit in the head by your machine (not to mention the water, did not help me get a restful night of sleep. Why this was a problem with a headboard and not with a sidetable, I will never know.
_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Sleepyhead |
Diabetes 2, RLS & bradycardia
Airsense For Her; Settings: range 8-12, Airfit P10 (M)
Airsense For Her; Settings: range 8-12, Airfit P10 (M)
- chunkyfrog
- Posts: 34545
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: Machine placement on headboard
Okay, back on topic. With my heated hose, I can get away with my machine just above my head.
I would never do it with an unheated hose. Just saying.
I love water--but not up my snoot.
I would never do it with an unheated hose. Just saying.
I love water--but not up my snoot.
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
Last edited by chunkyfrog on Sun Jul 10, 2016 4:50 pm, edited 1 time in total.
Re: Machine placement on headboard
I have been using a bookcase as my headboard and my machine sits on a shelf that is higher than my pillow. I use a hose hanger that carries the hose higher than the machine before it gets to me and I have not had any rainout. I like my air nice and humid too.
_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
Additional Comments: Supplemental oxygen at 2.5 lpm |
AutoSV 960 with heated hose. Settings: EPAP Min-12, EPAP Max-17, PS Min-5.5, PS Max-13, Max Pressure-25, Rate-Auto, Rise Time 1. Use Sleepyhead and Encore Pro.
Re: Machine placement on headboard
It could definitely work. I would suggest using a hose hanger to reduce the possibility of rainout. I use and like this one for less than $12: https://www.amazon.com/North-American-H ... 0034CHMRU/ There are also fancier, more expensive and heavier duty ones on our sponsor's website: https://www.cpap.com Also, some people have made their own hanging system that involves attaching something to the wall or the bed - you can search the forum to find those.
_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: January 2015 Sleep Study Results: Apnea/Hypopnea Index (AHI): 80.2, Sleepyhead |
Re: Machine placement on headboard
If the bed is wide for two persons then how would you reach the CPAP to fill the humidifier if standing on either side?
_________________
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: S9 Autoset machine; Ruby chinstrap under the mask straps; ResScan 5.6 |
see my recent set-up and Statistics:
http://i.imgur.com/TewT8G9.png
see my recent ResScan treatment results:
http://i.imgur.com/3oia0EY.png
http://i.imgur.com/QEjvlVY.png
http://i.imgur.com/TewT8G9.png
see my recent ResScan treatment results:
http://i.imgur.com/3oia0EY.png
http://i.imgur.com/QEjvlVY.png
Re: Machine placement on headboard
That's the thing about using cpap. You got to figure out what works for your situation. All you can do it try the shelf idea and see what happens with the humidity. It sounds like others have made it work above the bed.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: CPAP 10 cmH20., User since 1/1/15. |
- Mask Juice
- Posts: 7
- Joined: Sun Jul 10, 2016 9:26 am
- Location: Juice City, OH
Re: Machine placement on headboard
Thanks for the replies, knowledge, & suggestions.
Looks like I'll go "the longer hose and hanger above the center of the headboard" as a try. See how that goes.
Looks like I'll go "the longer hose and hanger above the center of the headboard" as a try. See how that goes.
ResMed AirSense™ 10 Elite CPAP with Humidifier
Re: Machine placement on headboard
Make sure the ten feet hose is compatible. My resmed only takes slimline tube. And I could not find the slimline hose in ten feet length
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: CPAP 10 cmH20., User since 1/1/15. |
Re: Machine placement on headboard
CG - Since when are you a cop in someone else's bedroom?
Re: Machine placement on headboard
Use a power strip with a long cord. I think your primary limitation is where you can plug in. If you have a power strip with a long cord, that will make your life much easier. You don't need a longer hose - you just move the whole machine to the side you are sleeping on that night. No problem with filling on either side then. Yes, the heated hose helps A LOT with rainout, but I think the Hose Buddy or similar also solves the problem, if you don't have the option. Note: if you didn't get your unit with a heated hose, you may need to get the higher wattage power brick. It is bundled automatically if you got the heated hose; not so sure if heated hose wasn't included.avi123 wrote:If the bed is wide for two persons then how would you reach the CPAP to fill the humidifier if standing on either side?
_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Sleepyhead |
Diabetes 2, RLS & bradycardia
Airsense For Her; Settings: range 8-12, Airfit P10 (M)
Airsense For Her; Settings: range 8-12, Airfit P10 (M)
Re: Machine placement on headboard
that is incorrect, *all* resmeds have settings for regular or slimline tube, the bilevels have settings for a 10 foot hose, since the extra length needs more compensation with a bilevel.Cardsfan wrote:Make sure the ten feet hose is compatible. My resmed only takes slimline tube
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: Machine placement on headboard
fyi, resmed doesn't cheap out and sell lower wattage power supplies, *all* s9 and air10 models are ready for a heated hose, whether you get one at first, or not.SewTired wrote:. Note: if you didn't get your unit with a heated hose, you may need to get the higher wattage power brick. It is bundled automatically if you got the heated hose; not so sure if heated hose wasn't included.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: Machine placement on headboard
When I am in my motorhome, the only place I can put my machine is on a shelf in the cupboard several feet above my head. Have never had rainout with this configuration and I DO use my humidifier. . I have no problem with filling the reservoir either, just take my humidifier out and fill it, replace it, hose up and go to sleep.
I would try having the machine above your head, it may just work fine.
I would try having the machine above your head, it may just work fine.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Started cpap in 2010.. still at it with great results.
Re: Machine placement on headboard
Because it's palerider. I have had him on global ignore for months.pumbany wrote:Why are you being rude to me?palerider wrote:ignore pumbany, he knows nothing about cpap usage, based on the questions he's asked around here, he's just trying to make himself sound worthwhile.pumbany wrote:As far as I know
_________________
Machine | Mask | |||
![]() | ![]() | |||
Additional Comments: ResMed A10 Oximetry Module (P/N: 37302), Nonin Xpod 3012LP and Nonin 8000 SL Device Pressure 11-16 cmH2O |
Admit nothing, deny everything, demand proof, and make counter allegations.