This eight-year-old post was just what I needed. Clear, easy to follow steps that I used to fix a maddening problem. My S9 was whistling so loud that I couldn't muffle it and getting to sleep was impossible when each breath was followed by a whistle. I got the S9 apart, cleaned, and back together with no problems, other than a stripped torx bit. There was also a hunk of clear plastic that rattled around inside that I removed.
Thanks so much for the procedure and photos.
Resmed S9 Elite Teardown with pictures
Re: Resmed S9 Elite Teardown with pictures
What did the foam look like inside your S9...and how old is your machine?Doncpap48 wrote: ↑Sun Feb 13, 2022 5:36 pmThis eight-year-old post was just what I needed. Clear, easy to follow steps that I used to fix a maddening problem. My S9 was whistling so loud that I couldn't muffle it and getting to sleep was impossible when each breath was followed by a whistle. I got the S9 apart, cleaned, and back together with no problems, other than a stripped torx bit. There was also a hunk of clear plastic that rattled around inside that I removed.
Thanks so much for the procedure and photos.
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
* This is the internet - what I write will probably NOT come across as it would in person; where one can read a person's face.
My posts are sometimes tongue & cheek w/some snarky sarcasm mixed in.
I leave it up to you to figure it out!
--
My posts are sometimes tongue & cheek w/some snarky sarcasm mixed in.
I leave it up to you to figure it out!
--
Re: Resmed S9 Elite Teardown with pictures
And maybe the plastic hunk is needed to make things work properly?
Re: Resmed S9 Elite Teardown with pictures
There should be no 'clear plastic' rattling around in the machine.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: Resmed S9 Elite Teardown with pictures
Maybe it's this piece...if so, it will be nice and Quiet!
- Motor2.jpg (65.05 KiB) Viewed 1560 times
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
* This is the internet - what I write will probably NOT come across as it would in person; where one can read a person's face.
My posts are sometimes tongue & cheek w/some snarky sarcasm mixed in.
I leave it up to you to figure it out!
--
My posts are sometimes tongue & cheek w/some snarky sarcasm mixed in.
I leave it up to you to figure it out!
--
Re: Resmed S9 Elite Teardown with pictures
I don't know if these are your teardown pics (posted on Imgur), but this looks like a good teardown of the pieces.
Maybe @Doncpap48 will point out the offending piece that he didn't place back in.
...plus, I really am curious as to the condition of the foam after all this time.
- S9Parts.jpeg (120.84 KiB) Viewed 1559 times
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
* This is the internet - what I write will probably NOT come across as it would in person; where one can read a person's face.
My posts are sometimes tongue & cheek w/some snarky sarcasm mixed in.
I leave it up to you to figure it out!
--
My posts are sometimes tongue & cheek w/some snarky sarcasm mixed in.
I leave it up to you to figure it out!
--
Re: Resmed S9 Elite Teardown with pictures
Yes, they are.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: Resmed S9 Elite Teardown with pictures
The foam in my machine was dusty, but otherwise in good shape. I don't know how old my machine is...over 5 years old, I think.JLROhio wrote:What did the foam look like inside your S9...and how old is your machine?Doncpap48 wrote: ↑Sun Feb 13, 2022 5:36 pmThis eight-year-old post was just what I needed. Clear, easy to follow steps that I used to fix a maddening problem. My S9 was whistling so loud that I couldn't muffle it and getting to sleep was impossible when each breath was followed by a whistle. I got the S9 apart, cleaned, and back together with no problems, other than a stripped torx bit. There was also a hunk of clear plastic that rattled around inside that I removed.
Thanks so much for the procedure and photos.
Sent from my SM-S767VL using Tapatalk
Re: Resmed S9 Elite Teardown with pictures
I'm pretty sure the clear plastic part I found in my machine was the end of one of the tabs that secure the filter holder. My filter holder is missing (I took it off late one night hoping that would stop the whistling). After cleaning and reassembling the machine, I attached the filter with duct tape.
Sent from my SM-S767VL using Tapatalk
Re: Resmed S9 Elite Teardown with pictures
Was the piece inside the air chamber? or just rattling around inside the outer case?Doncpap48 wrote: ↑Tue Feb 15, 2022 11:01 amI'm pretty sure the clear plastic part I found in my machine was the end of one of the tabs that secure the filter holder. My filter holder is missing (I took it off late one night hoping that would stop the whistling). After cleaning and reassembling the machine, I attached the filter with duct tape.
Sent from my SM-S767VL using Tapatalk
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.