Encore and Vista??

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
Trinity101
Posts: 143
Joined: Mon Mar 23, 2009 9:30 pm
Location: MD
Contact:
Contact Trinity101

Encore and Vista??

Post by Trinity101 » Fri Apr 24, 2009 10:49 pm

Hi,
OK, before I go and order my software and reader-I just thought of something- is the Encore software Vista 32- compatible?? I figured maybe I should find out now if there are any major hurdles...Thanks for any help.
~joan

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Additional Comments: Humidity used in passover mode; pressure 12.5
I know why you're here... I know what you've been doing... why you hardly sleep,.. and why night after night, you sit by your computer... It's the question that drives us... It's the question that brought you here. The Matrix,1999
Top
cflame1
Posts: 3311
Joined: Sat Mar 11, 2006 6:55 am
Location: expat Canadian in Kentucky

Re: Encore and Vista??

Post by cflame1 » Sat Apr 25, 2009 12:12 am

some have reported problems with the driver for the card reader... I haven't had any problems with it.
Top
Amontilado
Posts: 62
Joined: Wed May 23, 2007 7:56 am

Re: Encore and Vista??

Post by Amontilado » Sat Apr 25, 2009 12:27 am

For Vista, V1.8 of the Encore Pro software is needed. for encore Viewer, I believe it is Vista compatible, but no sure.

Steve

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: Mirage Activa™ LT Nasal CPAP Mask with Headgear
Top
terry123
Posts: 72
Joined: Sun Feb 12, 2006 10:36 am
Location: Texas

Re: Encore and Vista??

Post by terry123 » Sat Apr 25, 2009 5:56 am

I have Vista 32 on my laptop and Encore Viewer works just fine.
Top
User avatar
builta
Posts: 365
Joined: Wed Feb 18, 2009 6:13 pm
Location: Michigan

Re: Encore and Vista??

Post by builta » Sat Apr 25, 2009 7:27 am

Hi,

I have Encore Pro V1.8 and a Mako DT3500 card reader running without issue under Windows Visa 32 bit. The only start up issue was with the card reader and Forum member 5aces resolved that one for me see this post:

viewtopic/t41347/viewtopic.php?f=1&t=39 ... 51#p349062

I also have the same hardware and software running under Windows Vista 64 bit but getting it to work is a little more complicated. You need to do the same solution as indicated above for the card reader but you must also add this solution as reported by Forum member gregor in this post:

viewtopic.php?t=40234#p351806

follow the white rabbit

_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear
Additional Comments: Encore Pro, Backup-M Series BiPAP Auto. Set as ABiPAP 15I/9E AHI 0.2. Normally operates @ 12I/9E 1987 OSA diagnosis
If your never go off on a tangent, you are doomed to live your life going around in circles.
Top
Trinity101
Posts: 143
Joined: Mon Mar 23, 2009 9:30 pm
Location: MD
Contact:
Contact Trinity101

Re: Encore and Vista??

Post by Trinity101 » Sat Apr 25, 2009 6:56 pm

Thanks to all of you I now have the help I may need if I run into any problems- thanks again so much!
~joan

I took the red pill

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Additional Comments: Humidity used in passover mode; pressure 12.5
I know why you're here... I know what you've been doing... why you hardly sleep,.. and why night after night, you sit by your computer... It's the question that drives us... It's the question that brought you here. The Matrix,1999
Top
User avatar
builta
Posts: 365
Joined: Wed Feb 18, 2009 6:13 pm
Location: Michigan

Re: Encore and Vista??

Post by builta » Sat Apr 25, 2009 8:20 pm

Trinity101 wrote:Thanks to all of you I now have the help I may need if I run into any problems- thanks again so much!
~joan

I took the red pill
Good luck! Remember "There is no spoon."

_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear
Additional Comments: Encore Pro, Backup-M Series BiPAP Auto. Set as ABiPAP 15I/9E AHI 0.2. Normally operates @ 12I/9E 1987 OSA diagnosis
If your never go off on a tangent, you are doomed to live your life going around in circles.
Top
Trinity101
Posts: 143
Joined: Mon Mar 23, 2009 9:30 pm
Location: MD
Contact:
Contact Trinity101

Re: Encore and Vista??

Post by Trinity101 » Wed Apr 29, 2009 4:29 am

Of course not- that would be impossible -

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Additional Comments: Humidity used in passover mode; pressure 12.5
I know why you're here... I know what you've been doing... why you hardly sleep,.. and why night after night, you sit by your computer... It's the question that drives us... It's the question that brought you here. The Matrix,1999
Top


Return to “CPAP and Sleep Apnea Message Board”