I saw your post yesterday, but didn't have time to respond and I don't have THAT manual. viewtopic/t38953/ResMed-S8-Elite-II.html
I don't know how much more information you would need from the Setup/clinician manual, but I do have the instructions that will get you into the machine. They haven't changed for several generations of the ResMed machines.
1. Accessing the Clinical Menu
Turn on the device and wait until the standby (RAMP/SETTLING) screen appears on the LCD.
At this stage you can adjust the ramp/settling time.
Press the DOWN and RIGHT keys simultaneously for 3 seconds to access the clinical menu.
2. Changing Options and Settings.
Press the LEFT (menu) key to access the SETTINGS menu screen.
Use the UP and DOWN keys to scroll through the RESULTS, OPTIONS and SERVICING menu screens.
From a menu screen, use the LEFT (enter) key to access the parameters in that menu.
Use the UP and DOWN keys to scroll through menu parameters.
Use the LEFT key to view or change each parameter setting as required.
Press the RIGHT (exit) key until you return to the standby (RAMP/SETTLING) screen.
Here's a link to a list of manuals from which you could download an earlier version. http://www.internetage.ws/cpapdata/manuals/
Hope that helps.
(4) REMstar Autos w/C-Flex & (6) Pro 2 CPAPs w/C-Flex - Pressure Setting=12 cm - C-Flex Setting=2
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05