https://www.cpaptalk.com/wiki/api.php?action=feedcontributions&feedformat=atom&user=DreamDiverCpapWiki - User contributions [en]2026-05-03T20:36:58ZUser contributionsMediaWiki 1.30.0https://www.cpaptalk.com/wiki/index.php?title=User:DreamDiver&diff=1091307User:DreamDiver2020-05-19T13:55:44Z<p>DreamDiver: Created page with "Most members of this forum are ''wonderful'' However, if you are the target of bullying on this forum, please consider these excellent alternative forums: [http://www.apnea..."</p>
<hr />
<div>Most members of this forum are ''wonderful'' <br />
<br />
However, if you are the target of bullying on this forum, please consider these excellent alternative forums:<br />
<br />
[http://www.apneaboard.com/forums/ Apnea Board]<br />
<br />
[https://talk.sleepapnea.org/ Sleep Apnea Talk Forum]<br />
<br />
[http://www.freecpapadvice.com/forum Free CPAP Advice]<br />
<br />
<br />
Be well,<br />
<br />
Chris<br />
<br />
[https://dreamdiver.org/ DreamDiver]<br />
<br />
<br />
<br />
== DreamDiver's list of links: ==<br />
<br />
[https://www.sleepfiles.com/OSCAR/ OSCAR] - the current accepted fork of SleepyHead - software for tracking sleep data in order to self-titrate</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=CpapWiki_talk:Community_portal&diff=1091306CpapWiki talk:Community portal2020-05-19T13:50:03Z<p>DreamDiver: Created page with "This page has been compromised. It links to a casino in China. Surely this is not the intent of this wiki. There are no logs to determine who has edited this page. Are we su..."</p>
<hr />
<div>This page has been compromised.<br />
It links to a casino in China.<br />
Surely this is not the intent of this wiki.<br />
<br />
There are no logs to determine who has edited this page.<br />
<br />
Are we sure this area is secure?<br />
<br />
Chris <br />
<br />
--[[User:DreamDiver|DreamDiver]] ([[User talk:DreamDiver|talk]]) 08:50, 19 May 2020 (CDT)</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=ResScan&diff=4179ResScan2011-04-13T00:45:11Z<p>DreamDiver: </p>
<hr />
<div>ResScan is [[software]] for viewing data from the ResMed series cpap machines.<br />
PM either [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=38643 Uncle_Bob], [http://www.cpaptalk.com/viewtopic/t62743/memberlist.php?mode=viewprofile&u=52787 idamtnboy] or [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=19739 DreamDiver] for information on how to get the software if you want an earlier version. The direct link to the latest version of the software is always available at the bottom of [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=38643 Uncle_Bob's] signature.<br />
<br />
To see a tutorial on how to get around in ResScan, go [http://montfordhouse.com/cpap/resscan_tutorial here]. This tutorial was done in 3.12, but is appropriate for versions 3.10 through 3.14. The most current version as of April 9, 2011, is 3.14. Most people find 3.12 to be more stable than 3.13. No word yet on 3.14. There are some render issues in 64-bit Windows 7 with this software, so it may be best to install it in xp mode if you have trouble with it.<br />
<br />
To add tidal volume and respiratory rate to your navigation and detail pane for the S9 for v3.12, use [http://www.cpaptalk.com/viewtopic.php?p=544860#p544860 gvz's directions].<br />
<br />
To add tidal volume and respiratory rate for the S9 in v3.13, use [http://www.cpaptalk.com/viewtopic.php?p=565846#p565846 BernieRay's directions]. This also works for v3.14.<br />
<br />
Please do not post links to the software on the forum.</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=ResScan&diff=4178ResScan2011-04-13T00:44:42Z<p>DreamDiver: </p>
<hr />
<div>ResScan is [[software]] for viewing data from the ResMed series cpap machines.<br />
PM either [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=38643 Uncle_Bob], [http://www.cpaptalk.com/viewtopic/t62743/memberlist.php?mode=viewprofile&u=52787 idamtnboy] or [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=19739 DreamDiver] for information on how to get the software if you want an earlier version. The direct link to the latest version of the software is always available at the bottom of [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=38643 Uncle_Bob]'s signature.<br />
<br />
To see a tutorial on how to get around in ResScan, go [http://montfordhouse.com/cpap/resscan_tutorial here]. This tutorial was done in 3.12, but is appropriate for versions 3.10 through 3.14. The most current version as of April 9, 2011, is 3.14. Most people find 3.12 to be more stable than 3.13. No word yet on 3.14. There are some render issues in 64-bit Windows 7 with this software, so it may be best to install it in xp mode if you have trouble with it.<br />
<br />
To add tidal volume and respiratory rate to your navigation and detail pane for the S9 for v3.12, use [http://www.cpaptalk.com/viewtopic.php?p=544860#p544860 gvz's directions].<br />
<br />
To add tidal volume and respiratory rate for the S9 in v3.13, use [http://www.cpaptalk.com/viewtopic.php?p=565846#p565846 BernieRay's directions]. This also works for v3.14.<br />
<br />
Please do not post links to the software on the forum.</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=ResScan&diff=4177ResScan2011-04-13T00:44:02Z<p>DreamDiver: </p>
<hr />
<div>ResScan is [[software]] for viewing data from the ResMed series cpap machines.<br />
PM either [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=38643 Uncle_Bob], [http://www.cpaptalk.com/viewtopic/t62743/memberlist.php?mode=viewprofile&u=52787 idamtnboy] or [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=19739 DreamDiver] for information on how to get the software if you want an earlier version. The direct link to the latest version of the software is always available at the bottom of Uncle_Bob's signature.<br />
<br />
To see a tutorial on how to get around in ResScan, go [http://montfordhouse.com/cpap/resscan_tutorial here]. This tutorial was done in 3.12, but is appropriate for versions 3.10 through 3.14. The most current version as of April 9, 2011, is 3.14. Most people find 3.12 to be more stable than 3.13. No word yet on 3.14. There are some render issues in 64-bit Windows 7 with this software, so it may be best to install it in xp mode if you have trouble with it.<br />
<br />
To add tidal volume and respiratory rate to your navigation and detail pane for the S9 for v3.12, use [http://www.cpaptalk.com/viewtopic.php?p=544860#p544860 gvz's directions].<br />
<br />
To add tidal volume and respiratory rate for the S9 in v3.13, use [http://www.cpaptalk.com/viewtopic.php?p=565846#p565846 BernieRay's directions]. This also works for v3.14.<br />
<br />
Please do not post links to the software on the forum.</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=ResScan&diff=4176ResScan2011-04-12T23:45:07Z<p>DreamDiver: </p>
<hr />
<div>ResScan is [[software]] for viewing data from the ResMed series cpap machines.<br />
PM either [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=38643 Uncle_Bob], [http://www.cpaptalk.com/viewtopic/t62743/memberlist.php?mode=viewprofile&u=52787 idamtnboy] or [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=19739 DreamDiver] for information on how to get the software.<br />
<br />
To see a tutorial on how to get around in ResScan, go [http://montfordhouse.com/cpap/resscan_tutorial here]. This tutorial was done in 3.12, but is appropriate for versions 3.10 through 3.14. The most current version as of April 9, 2011, is 3.14. Most people find 3.12 to be more stable than 3.13. No word yet on 3.14. There are some render issues in 64-bit Windows 7 with this software, so it may be best to install it in xp mode if you have trouble with it.<br />
<br />
To add tidal volume and respiratory rate to your navigation and detail pane for the S9 for v3.12, use [http://www.cpaptalk.com/viewtopic.php?p=544860#p544860 gvz's directions].<br />
<br />
To add tidal volume and respiratory rate for the S9 in v3.13, use [http://www.cpaptalk.com/viewtopic.php?p=565846#p565846 BernieRay's directions]. This also works for v3.14.<br />
<br />
Please do not post links to the software on the forum.</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=ResScan&diff=4175ResScan2011-04-11T04:28:22Z<p>DreamDiver: </p>
<hr />
<div>ResScan is [[software]] for viewing data from the ResMed series cpap machines.<br />
PM either [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=38643 Uncle_Bob], [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=53336 BernieRay], [http://www.cpaptalk.com/viewtopic/t62743/memberlist.php?mode=viewprofile&u=52787 idamtnboy] or [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=19739 DreamDiver] for information on how to get the software.<br />
<br />
To see a tutorial on how to get around in ResScan, go [http://montfordhouse.com/cpap/resscan_tutorial here]. This tutorial was done in 3.12, but is appropriate for versions 3.10 through 3.14. The most current version as of April 9, 2011, is 3.14. Most people find 3.12 to be more stable than 3.13. No word yet on 3.14. There are some render issues in 64-bit Windows 7 with this software, so it may be best to install it in xp mode if you have trouble with it.<br />
<br />
To add tidal volume and respiratory rate to your navigation and detail pane for the S9 for v3.12, use [http://www.cpaptalk.com/viewtopic.php?p=544860#p544860 gvz's directions].<br />
<br />
To add tidal volume and respiratory rate for the S9 in v3.13, use [http://www.cpaptalk.com/viewtopic.php?p=565846#p565846 BernieRay's directions]. This also works for v3.14.<br />
<br />
Please do not post links to the software on the forum.</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=Software&diff=4174Software2011-04-10T20:59:05Z<p>DreamDiver: </p>
<hr />
<div>Modern CPAP machines come in many flavors. Long-time forum members suggest that newbies acquire a CPAP machine that is '''fully data-capable'''. This means a great deal of information is stored on a transportable card, usually either a smart card, a USB stick or an SD card. The card is ostensibly supposed to be sent to the doctor or the DME, but many doctors and DME's don't even own the software to read the data off your card. DME's are primarily interested in your compliance data for insurance purposes. The real beauty of the software comes into play when the user can review data and compare with previous nights of data to see trends in improvement and to learn during what part of the night large leaks are occurring.<br />
<br />
Some software companies have come up with a 'patient' version of the software which is less powerful than the proposed DME/Doctor version. These are generally considered card 'Viewer' software. These generally can't edit the card.<br />
<br />
Some CPAP makers actually include the software with their machines. Others expect the user to buy the software separately. Some have an online system that allows you to punch in a code from your machine to get general statistics. Still others allow a few interested users to download the software directly from their site.<br />
<br />
These companies offer software in various forms either to consultants or to patients:<br />
<br />
* ResMed offers '''[[ResScan]]'''.<br />
* Philips Respironics offers '''[[Encore]] Viewer''' and '''[[Encore]] Pro'''.<br />
* DeVilbiss offers '''SmartLink'''.<br />
* Fisher & Paykel offer '''Performance Maximizer'''.<br />
<br />
Modern machines are generally using either SD cards or USB adapters. Some older machines use smart cards. If you have an older machine, you may need to buy an adapter to read the smart card.<br />
<br />
(More information to follow.)</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=Software&diff=4173Software2011-04-10T20:57:21Z<p>DreamDiver: </p>
<hr />
<div>Modern CPAP machines come in many flavors. Long-time forum members suggest that newbies acquire a CPAP machine that is '''fully data-capable'''. This means a great deal of information is stored on a transportable card, usually either a smart card, a USB stick or an SD card. The card is ostensibly supposed to be sent to the doctor or the DME, but many doctors and DME's don't even own the software to read the data off your card. DME's are primarily interested in your compliance data for insurance purposes. The real beauty of the software comes into play when the user can review data and compare with previous nights of data to see trends in improvement and to learn during what part of the night large leaks are occurring.<br />
<br />
Some software companies have come up with a patient version of the software which is less powerful than the proposed DME/Doctor version. These are generally considered card 'reader' software. They generally don't edit the card.<br />
<br />
Some CPAP makers actually include the software with their machines. Others expect the user to buy the software separately. Some have an online system that allows you to punch in a code from your machine to get general statistics. Still others allow a few interested users to download the software directly from their site.<br />
<br />
These companies offer software in various forms either to consultants or to patients:<br />
<br />
* ResMed offers '''[[ResScan]]'''.<br />
* Philips Respironics offers '''[[Encore]] Viewer''' and '''[[Encore]] Pro'''.<br />
* DeVilbiss offers '''SmartLink'''.<br />
* Fisher & Paykel offer '''Performance Maximizer'''.<br />
<br />
Modern machines are generally using either SD cards or USB adapters. Some older machines use smart cards. If you have an older machine, you may need to buy an adapter to read the smart card.<br />
<br />
(More information to follow.)</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=Encore&diff=4172Encore2011-04-10T20:56:31Z<p>DreamDiver: New page: Phillips Respironics offers two flavors of Encore software: == Encore Viewer == Encore Viewer is read-only software that views whatever data is currently on your card. It has no capac...</p>
<hr />
<div>Phillips Respironics offers two flavors of Encore [[software]]:<br />
<br />
== Encore Viewer ==<br />
Encore Viewer is read-only software that views whatever data is currently on your card. It has no capacity to edit card data and is geared toward giving access to patients using the machine. <br />
<br />
The most current version of Encore Reader is always available at CPAP.com and through other venues on the web. Because the Viewer is available for the public to buy, it comes across as ethically more wrong to actually ask for the Viewer as a pirated download. If you are unwilling to go the full measure of using Encore Pro, please buy the software through a traditional outlet.<br />
<br />
== Encore Pro ==<br />
Encore Pro is software more appropriately directed toward use by DME's. Though it had been available as recently as version 1.8 to buy in many countries by anyone with a credit card, it is no longer technically available for patients as end-users. The software is not officially available for download. This is most likely done not so much to keep the software out of the hands of patients, but instead to defer any liability that could be directed against Phillips Respironics for allowing end-users to actually change settings on their machines using the professional software. <br />
<br />
Encore Pro uses a MSSQL database to house your data. Encore Viewer does not. This means that while Encore Viewer can show you what's currently on the card, Encore Pro can show you everything about a patient's records that you've ever uploaded to the database. All previous data is available from patient onset for viewing at your discretion whether the card is currently being read by the computer or not. Patient data is also exportable in xml format for transport to other machines or between doctors' offices. Many feel that because the data is so much more useful in Encore Pro, it is worth stepping over into the legal grey area of downloading software ''for medical use''. ResMed has actually taken a different tack on this issue with [[ResScan]]. Forum members have been actively giving feedback to ResMed to help troubleshoot and find quirks, making the software better. Following ResMed's lead, many forum users feel that Respironics may non-actively 'allow' if not support users downloading the software because forum activity about the software better helps them troubleshoot bugs that DME's are generally either too clueless or too busy to find, and if something negative were to happen where the software became litigious, they could just say, "Hey, we only allow professionals to use this software". Shades of gray. The most current version of Encore Pro is 2.4.<br />
<br />
If you are interested in finding out more about Encore Pro, consider PM'ing [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=40932 Pugsy]<br />
<br />
== About Card Readers ==<br />
If you own an older model cpap machine that uses a smart card, you will need to buy the smart-card reader. More modern Phillips Respironics machines use SD cards and will not need any special adapter if your computer already has a reader for SD cards.</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=Software&diff=4171Software2011-04-10T20:19:37Z<p>DreamDiver: </p>
<hr />
<div>Modern CPAP machines come in many flavors. Long-time forum members suggest that newbies acquire a CPAP machine that is '''fully data-capable'''. This means a great deal of information is stored on a transportable card, usually either a smart card, a USB stick or an SD card. The card is ostensibly supposed to be sent to the doctor or the DME, but many doctors and DME's don't even own the software to read the data off your card. DME's are primarily interested in your compliance data for insurance purposes. The real beauty of the software comes into play when the user can review data and compare with previous nights of data to see trends in improvement and to learn during what part of the night large leaks are occurring.<br />
<br />
Some software companies have come up with a patient version of the software which is less powerful than the proposed DME/Doctor version. These are generally considered card 'reader' software. They generally don't edit the card.<br />
<br />
Some CPAP makers actually include the software with their machines. Others expect the user to buy the software separately. Some have an online system that allows you to punch in a code from your machine to get general statistics. Still others allow a few interested users to download the software directly from their site.<br />
<br />
These companies offer software in various forms either to consultants or to patients:<br />
<br />
* ResMed offers [[ResScan]].<br />
* Philips Respironics offers [[Encore]]Viewer and [[Encore]] Pro.<br />
* DeVilbiss offers SmartLink.<br />
* Fisher & Paykel offer Performance Maximizer.<br />
<br />
Modern machines are generally using either SD cards or USB adapters. Some older machines use smart cards. If you have an older machine, you may need to buy an adapter to read the smart card.<br />
<br />
(More information to follow.)</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=ResScan&diff=4170ResScan2011-04-10T17:15:12Z<p>DreamDiver: </p>
<hr />
<div>ResScan is [[software]] for viewing data from the ResMed series cpap machines.<br />
PM either [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=38643 Uncle_Bob], [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=53336 BernieRay] or [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=19739 DreamDiver] for information on how to get the software.<br />
<br />
To see a tutorial on how to get around in ResScan, go [http://montfordhouse.com/cpap/resscan_tutorial here]. This tutorial was done in 3.12, but is appropriate for versions 3.10 through 3.14. The most current version as of April 9, 2011, is 3.14. Most people find 3.12 to be more stable than 3.13. No word yet on 3.14. There are some render issues in 64-bit Windows 7 with this software, so it may be best to install it in xp mode if you have trouble with it.<br />
<br />
To add tidal volume and respiratory rate to your navigation and detail pane for the S9 for v3.12, use [http://www.cpaptalk.com/viewtopic.php?p=544860#p544860 gvz's directions].<br />
<br />
To add tidal volume and respiratory rate for the S9 in v3.13, use [http://www.cpaptalk.com/viewtopic.php?p=565846#p565846 BernieRay's directions]. This also works for v3.14.<br />
<br />
Please do not post links to the software on the forum.</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=ResScan&diff=4169ResScan2011-04-10T17:14:13Z<p>DreamDiver: Undo revision 4168 by DreamDiver (Talk)</p>
<hr />
<div>ResScan is [[software]] for viewing data from the ResMed series cpap machines.<br />
PM either [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=38643 Uncle_Bob], [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=53336 BernieRay] or [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=19739 DreamDiver] for information on how to get the software.<br />
<br />
To see a tutorial on how to get around in ResScan, go [http://montfordhouse.com/cpap/resscan_tutorial here]. This tutorial was done in 3.14, but is appropriate for versions 3.10 through 3.13. The most current version as of April 9, 2011, is 3.14. Most people find 3.12 to be more stable than 3.13. No word yet on 3.14. There are some render issues in 64-bit Windows 7 with this software, so it may be best to install it in xp mode if you have trouble with it.<br />
<br />
To add tidal volume and respiratory rate to your navigation and detail pane for the S9 for v3.12, use [http://www.cpaptalk.com/viewtopic.php?p=544860#p544860 gvz's directions].<br />
<br />
To add tidal volume and respiratory rate for the S9 in v3.13, use [http://www.cpaptalk.com/viewtopic.php?p=565846#p565846 BernieRay's directions]. This also works for v3.14.<br />
<br />
Please do not post links to the software on the forum.</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=ResScan&diff=4168ResScan2011-04-10T17:13:35Z<p>DreamDiver: </p>
<hr />
<div>ResScan is [[software]] for viewing data from the ResMed series cpap machines.<br />
PM either [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=38643 Uncle_Bob], [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=53336 BernieRay] or [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=19739 DreamDiver] for information on how to get the software.<br />
<br />
To see a tutorial on how to get around in ResScan, go [http://montfordhouse.com/cpap/resscan_tutorial here]. This tutorial was done in 3.12, but is appropriate for versions 3.10 through 3.13. The most current version as of April 4, 2011, is 3.13. Most people find 3.12 to be more stable than 3.13. There are some render issues in 64-bit Windows 7 with this software, so it may be best to install it in xp mode if you have trouble with it.<br />
<br />
To add tidal volume and respiratory rate to your navigation and detail pane for the S9 for v3.12, use [http://www.cpaptalk.com/viewtopic.php?p=544860#p544860 gvz's directions].<br />
<br />
To add tidal volume and respiratory rate for the S9 in v3.13, use [http://www.cpaptalk.com/viewtopic.php?p=565846#p565846 BernieRay's directions].<br />
<br />
Please do not post direct links to ResScan on the forum.</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=ResScan&diff=4167ResScan2011-04-10T16:48:37Z<p>DreamDiver: </p>
<hr />
<div>ResScan is [[software]] for viewing data from the ResMed series cpap machines.<br />
PM either [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=38643 Uncle_Bob], [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=53336 BernieRay] or [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=19739 DreamDiver] for information on how to get the software.<br />
<br />
To see a tutorial on how to get around in ResScan, go [http://montfordhouse.com/cpap/resscan_tutorial here]. This tutorial was done in 3.14, but is appropriate for versions 3.10 through 3.13. The most current version as of April 9, 2011, is 3.14. Most people find 3.12 to be more stable than 3.13. No word yet on 3.14. There are some render issues in 64-bit Windows 7 with this software, so it may be best to install it in xp mode if you have trouble with it.<br />
<br />
To add tidal volume and respiratory rate to your navigation and detail pane for the S9 for v3.12, use [http://www.cpaptalk.com/viewtopic.php?p=544860#p544860 gvz's directions].<br />
<br />
To add tidal volume and respiratory rate for the S9 in v3.13, use [http://www.cpaptalk.com/viewtopic.php?p=565846#p565846 BernieRay's directions]. This also works for v3.14.<br />
<br />
Please do not post links to the software on the forum.</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=ResScan&diff=4166ResScan2011-04-10T16:47:43Z<p>DreamDiver: </p>
<hr />
<div>ResScan is [[software]] for viewing data from the ResMed series cpap machines.<br />
PM either [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=38643 Uncle_Bob], [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=53336 BernieRay] or [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=19739 DreamDiver] for information on how to get the software.<br />
<br />
To see a tutorial on how to get around in ResScan, go [http://montfordhouse.com/cpap/resscan_tutorial here]. This tutorial was done in 3.14, but is appropriate for versions 3.10 through 3.13. The most current version as of April 9, 2011, is 3.14. Most people find 3.12 to be more stable than 3.13. No word yet on 3.14. There are some render issues in 64-bit Windows 7 with this software, so it may be best to install it in xp mode if you have trouble with it.<br />
<br />
To add tidal volume and respiratory rate to your navigation and detail pane for the S9 for v3.12, use [http://www.cpaptalk.com/viewtopic.php?p=544860#p544860 gvz's directions].<br />
<br />
To add tidal volume and respiratory rate for the S9 in v3.13, use [http://www.cpaptalk.com/viewtopic.php?p=565846#p565846 BernieRay's directions]. This also works for 3.14.<br />
<br />
Please do not post links to the software on the forum.</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=ResScan&diff=4165ResScan2011-04-10T16:47:07Z<p>DreamDiver: </p>
<hr />
<div>ResScan is [[software]] for viewing data from the ResMed series cpap machines.<br />
PM either [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=38643 Uncle_Bob], [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=53336 BernieRay] or [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=19739 DreamDiver] for information on how to get the software.<br />
<br />
To see a tutorial on how to get around in ResScan, go [http://montfordhouse.com/cpap/resscan_tutorial here]. This tutorial was done in 3.14, but is appropriate for versions 3.10 through 3.13. The most current version as of April 4, 2011, is 3.13. Most people find 3.12 to be more stable than 3.13. There are some render issues in 64-bit Windows 7 with this software, so it may be best to install it in xp mode if you have trouble with it.<br />
<br />
To add tidal volume and respiratory rate to your navigation and detail pane for the S9 for v3.12, use [http://www.cpaptalk.com/viewtopic.php?p=544860#p544860 gvz's directions].<br />
<br />
To add tidal volume and respiratory rate for the S9 in v3.13, use [http://www.cpaptalk.com/viewtopic.php?p=565846#p565846 BernieRay's directions]. This also works for 3.14.<br />
<br />
Please do not post links to the software on the forum.</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=ResScan&diff=4164ResScan2011-04-10T16:46:47Z<p>DreamDiver: </p>
<hr />
<div>ResScan is [[software]] for viewing data from the ResMed series cpap machines.<br />
PM either [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=38643 Uncle_Bob], [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=53336 BernieRay] or [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=19739 DreamDiver] for information on how to get the software.<br />
<br />
To see a tutorial on how to get around in ResScan, go [http://montfordhouse.com/cpap/resscan_tutorial here]. This tutorial was done in 3.12, but is appropriate for versions 3.10 through 3.13. The most current version as of April 4, 2011, is 3.13. Most people find 3.12 to be more stable than 3.13. There are some render issues in 64-bit Windows 7 with this software, so it may be best to install it in xp mode if you have trouble with it.<br />
<br />
To add tidal volume and respiratory rate to your navigation and detail pane for the S9 for v3.12, use [http://www.cpaptalk.com/viewtopic.php?p=544860#p544860 gvz's directions].<br />
<br />
To add tidal volume and respiratory rate for the S9 in v3.13, use [http://www.cpaptalk.com/viewtopic.php?p=565846#p565846 BernieRay's directions]. This also works for 3.14.<br />
<br />
Please do not post links to the software on the forum.</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=Software&diff=4162Software2011-04-05T03:25:19Z<p>DreamDiver: </p>
<hr />
<div>Modern CPAP machines come in many flavors. Long-time forum members suggest that newbies acquire a CPAP machine that is '''fully data-capable'''. This means a great deal of information is stored on a transportable card, usually either a smart card, a USB stick or an SD card. The card is ostensibly supposed to be sent to the doctor or the DME, but many doctors and DME's don't even own the software to read the data off your card. DME's are primarily interested in your compliance data for insurance purposes. The real beauty of the software comes into play when the user can review data and compare with previous nights of data to see trends in improvement and to learn during what part of the night large leaks are occurring.<br />
<br />
Some software companies have come up with a patient version of the software which is less powerful than the proposed DME/Doctor version. These are generally considered card 'reader' software. They generally don't edit the card.<br />
<br />
Some CPAP makers actually include the software with their machines. Others expect the user to buy the software separately. Some have an online system that allows you to punch in a code from your machine to get general statistics. Still others allow a few interested users to download the software directly from their site.<br />
<br />
These companies offer software in various forms either to consultants or to patients:<br />
<br />
* ResMed offers [[ResScan]].<br />
* Philips Respironics offers EncoreViewer.<br />
* DeVilbiss offers SmartLink.<br />
* Fisher & Paykel offer Performance Maximizer.<br />
<br />
Modern machines are generally using either SD cards or USB adapters. Some older machines use smart cards. If you have an older machine, you may need to buy an adapter to read the smart card.<br />
<br />
(More information to follow.)</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=CPAP_FAQs&diff=4161CPAP FAQs2011-04-05T03:24:38Z<p>DreamDiver: /* Insurance */</p>
<hr />
<div>{{stub}}<br />
[[Image:Question mark.jpg|right|thumb|200px|CPAP FAQs]]<br />
<small>In case you are looking for them, '''here are the [[Help:FAQs|Wiki FAQs]]''' which discuss how to use the CPAPtalk.com CPAP Wiki.</small><br />
----<br />
This is a list of '''CPAP FAQs'''. It is a great place to get started, especially if you are a new [[CPAP]] user. You are free to add common questions and answers here, regarding the use of an [[xPAP]] machine, or Obstructive Sleep Apnea. Answers should preferably be short in nature and link to more detailed articles in the [[CpapWiki:About|CPAPtalk.com CPAP Wiki]], if necessary.<br />
<br />
=Selecting Equipment=<br />
==Insurance==<br />
=== What are the insurance billing codes for my CPAP equipment? ===<br />
<br />
=== Where can I learn about software? ===<br />
Visit the page on [[software]].<br />
<br />
=Common CPAP Side Effects=<br />
==Why is air leaking from my mouth?==<br />
<br />
Air leaks from the mouth whenever the mouth is opened during CPAP therapy. This occurs for many reasons, but a very common one is due to nasal irritation from the CPAP airflow.<br />
<br />
The correlation to a lack of humidification and mouth leaks is a topic being heavily researched. Studies are now being conducted on the hypothesis that a large amount of mouth leakage is caused by the following cycle:<br />
<br />
1. CPAP therapy is used with ineffective or no humidification.<br />
2. The nasal membranes are unable to adequately condition the increased airflow and after a few minutes the <br />
airway and nasal passages become dry.<br />
3. To remedy the dryness and obtain moisture, the body uses the mouth to breathe.<br />
4. CPAP air follows the path of least resistance and leaks out of the open mouth.<br />
5. The air leaking through the mouth causes more dryness.<br />
6. Patient wakes up feeling tired with significant dryness in mouth and dry, swollen nasal passages. <br />
<br />
<br />
The answer to this cycle is humidification. If the mouth continues to open during sleep, a chinstrap may be needed to hold the jaw up so that the mouth can close. If mouth breathing continues, a [[Full Face Mask]] that covers the nose and mouth is indicated.<br />
<br />
[[Mask Leaks]]<br />
<br />
===How do I stop these leaks?===<br />
Wet your skin== '''Mask leaks''' (IPAP = 19) solved by wetting skin and mask seal just before donning; makes it seal better (Leak = 0). - rogelah<br />
<br />
<br />
'''Mouth Leaks'''<br />
<br />
When using nasal masks; e.g. Swift For Her, ...... <br />
<br />
Some nasal mask users need a seal over the mouth.<br />
<br />
One form of seal is 3M Blue painter's 2" tape, or you can use (other brand tape).<br />
<br />
Rip off a piece of tape about 3 1/2" long and place over mouth. If 3M tape is not staying stuck on skin, if tape user is waking up in the middle of the night with the tape loose and wet, it may be air puffing out between lips (blowfishing) causing warm air condensation under the tape or drooling. <br />
<br />
To prevent this, in addition to the tape, there are numerous options; some of them are: Purse, pucker or fold lips under the tape, place Poligrip Strips between lips, or .......<br />
<br />
To use the Poligrip Strips, bend each one so it fits the curve of the lip line, place each strip onto wet bottom lip. Then, wet the top of the strip and top lips, close lips. EASY to take off with a tissue in the a.m. There is no taste to the Poligrip Strips due to the fact that they sit on lips and do not ooze into mouth or touch tongue like polident paste would.<br />
<br />
[[Mask Leaks]]<br />
<br />
===Supplies===<br />
Teflon tape<br />
<br />
Moleskin<br />
<br />
==Additional Problems== <br />
<br />
[http://www.cpaptalk.com/wiki/index.php/Category:Common_Problems Bruxism, Aerophagia, Rainout Oh My!]<br />
<br />
===Mask Fit Problems===<br />
[[I Remove My Mask in my Sleep]]<br />
<br />
[[Claustrophobia]]<br />
<br />
[[Pain on the Bridge of the Nose]]<br />
<br />
[[Mask Leaks Blow onto Partner]]<br />
<br />
For the complete list of CPAP side effects see [https://www.cpap.com/cpap-faq/Common-CPAP-Side-Effects.html#FGID-158 CPAP.com List of CPAP Side Effects]<br />
<br />
=Common Equipment Problems=<br />
<br />
<br />
==Which masks work with beards?==<br />
CPAPtalk.com Forum Members weigh in:<br />
<br />
1. '''Full Face Masks'''<br />
<br />
'I too have a full beard and although I normally use a [http://www.cpaptalk.com/wiki/index.php/CPAP_Mask#Nasal_pillows_masks nasal pillows mask], this past weekend I got a great seal using the Liberty. I think using a chin strap to keep the lower FF mask strap from pulling the lower jaw open helps a lot ... Try Sleep Guy's [https://www.cpap.com/productpage/pursleep-cpap-chinstrap-cotton.html PAP-Cap].' - Fuzzy Guest<br />
<br />
'Full beard, [https://www.cpap.com/productpage/resmed-mirage-quattro-full-face-mask-headgear.html ResMed Mirage Quattro].' - Bigburd<br />
Two fully bearded CPAP users participated in the Product Challenge 11 FullLife Full Face Mask vs. Mirage Quattro Mask. Both chose the [[ResMed Mirage Quattro]]. Their reveiws can be read here: [https://www.cpap.com/productpage/resmed-mirage-quattro-full-face-mask-headgear.html PC11]<br />
<br />
'''Lanolin tip'''<br />
A bit of lanolin in the beard where the seal contacts it and my leak line goes flat. It washes out easily with soap and water in the morning. - Silver Pelt<br />
<br />
2. '''Nasal Pillow Mask''' <br />
<br />
'When I went for my sleep study I had a full beard. The tech, who was great, started with a nasal pillow, but I hated it. We then spent hours trying to get a nasal or full mask to provide a good seal. Nada. He then said give the [https://www.cpap.com/simple-find-cpap-products/cpap-masks/cpap-masks/nasal-pillow.html nasal pillow] another chance. I did and fell asleep. I hated it during the first two weeks of use, but sometime during the third week I realized that it didn't bother me any longer. You might want to try a naal pillow and see if you can adjust to it. For me, it was that or shaving.'- norm<br />
<br />
3. [[Nasal Aire II]]<br />
<br />
'Contemplate the [https://www.cpap.com/productpage/innomed-nasal-aire-ii-all-size-kit.html Nasal Aire II] and a chinstrap. I've got a few friends with beards who are getting good results with it. Just had a satisfied customer leave my house in fact. Cute little beard and mustache, very happy with his NAII and PAP-CAP from http://www.pur-sleep.com.<br />
<br />
4. '''Profile Lite'''<br />
<br />
'I have a full, bushy beard and moustache and get a good seal using the Respironics [https://www.cpap.com/productpage/profile-lite-gel-mask-respironics.html Profile Lite] mask.' -Ladd<br />
<br />
==Replacement==<br />
=== How often should I replace my mask? ===<br />
* Many masks have replaceable cushions, pillows, or other parts. Typically, a mask cushion should be replaced at least once every six to nine months. If your mask does not have a replaceable cushion, you may need to buy a whole new mask.<br />
=== How often should I replace my headgear? ===<br />
* It depends. Sure signs your headgear needs to be replaced are leaks, having to over tighten the headgear, elasticity is gone, etc.<br />
=== When should I change the filters on my xPAP machine? ===<br />
* Fine Filters should be replaced approximately every 30 days, or as necessary. If you can visibly see some dirt or dust on the fine filter then it is time to change it.<br />
<br />
=Cleaning=<br />
=== How do I clean my mask and hose? ===<br />
* There are many methods available. Most manufacturers of CPAP Masks include cleaning instructions in the package with the mask. Baby shampoo or ivory bar soap is often used.<br />
===How do I clean my humidifier?===<br />
Use distilled water to clean your humidifier. Only use tap water if you intend to clean it daily. This avoids mineral deposits. <br />
<br />
CPAPtalk member Bluebonnet_Gal says: Have you tried soaking it in water that has a little bleach mixed in. Bleach should kill any mold. My DME recommends cleaning my mask and hose in bleach water. I personally don't think it's a good idea to use bleach on something that I strap to my face every night, so I use vinegar to disinfect, but on a one time basis, I don't think it will do any harm. Be sure to rinse well, repeatedly, after soaking in bleach.<br />
<br />
===How Do I dry CPAP Hoses after cleaning?===<br />
Cleaning Tubes or Hoses requires warm soapy water. <br />
To dry hoses, try these techniques:<br />
<br />
1. Spin Dry<bR><br />
tatooyu says: I spin the tube gently, a la Mick Dundee in Crocodile Dundee II when he was making his aboriginal "phone call" using a bullroarer. That way, the centripetal force pulls the water to the outside of the tube. Seems to work pretty well. <br />
<br />
2. "Pipe Cleaners"<bR><br />
6ptstar says: I use a nylon string with a fishing weight tied to it to drop it through the hose. Put a loop on the other end and put a couple of strips of fake camos I bought to clean my car windshield and pull it through. Gets it almost dry so in a couple of hours it finishes drying. I would thing you could use strips of a paper towel or pieces of a regular towel and it would work as well. <br />
<br />
3. Hair Dryer<bR><br />
6ptstar says: One time I did duck tape a hose connector to my wife's old hair dryer and hooked the hose up to the connector and turned the hair dryer on low. It dried it in no time. The string thing just seems easier but I don't wash it that often.<br />
<br />
4. Let it Be<bR><br />
Catnapper says: '''NEVER use paper towels'''. You want to be careful not to leave lint in the hose. You don't want lint in your lungs, right?<br />
<br />
Unless there is lots of water, just leave it alone. You are going to send moist air through the hose anyway.<br />
<br />
5. Rotate Hoses <bR><br />
Fishhead says: bought a second hose so i could rotate them each day, doubling my drying time.<br />
<br />
5. Place the hose in a freezer for a couple of hours. The droplets will freeze and fall off the hose surface when you flex it from the outside.<br />
If you want to wash your hose... the best is to have a spare hose that can be used while waiting for the other to dry. In fact, having a spare hose is a good idea anyways.<br />
<br />
== If I lose weight can I get off the CPAP? ==<br />
Everyone is different and has a different take on this question. It is almost always true that an improved diet and level of activity is beneficial to your health. <br />
<br />
Read Diet and excercise tips on the [Sleep Tips] page. Also explore other's experiences on relevant CPAPtalk posts here: <br />
<br />
[http://www.cpaptalk.com/viewtopic/t37928/viewtopic.php?f=1&t=46353&p=416760&hilit=weight+CPAP#p416760 Weight Loss Surgery and CPAP]<br />
<br />
=== Are surgeries for Obstructive Sleep Apnea effective? ===<br />
=== Do dental devices for snoring or Sleep Apnea actually work? ===<br />
=Miscellaneous Questions=<br />
==Alcohol & CPAP: Bad idea?==<br />
CPAPtalk.com member Mars says:<br><br />
Generally speaking, alcohol is a dangerous drug, and if it had just appeared in the last 20-30 years it would very likely be made illegal.<br />
<br />
If you want to be on the safe side, I would suggest no drinking whilst you are awake, and so you will avoid all problems concerning alcohol, except those caused by others. :) :(<br />
<br />
Otherwise, work out what a safe blood alcohol level would be for you, get an instrument for measuring blood alcohol, and keep below your safe level.<br />
<br />
A safe level is where you metabolize the alcohol before it reaches the brain.<br />
<br />
Alternatively, go a week with your normal drinking, and a week with no drinking, and compare the results.<br />
<br />
Having both - an alcohol damaged brain and a sleep apnea damaged brain - I personally would tend to give what is left up there every chance of recovery.<br />
<br />
Good luck.<br />
<br />
PS An interesting moral/ political/ scientific arguement is currently going on in the UK<br />
<br />
http://news.bbc.co.uk/2/hi/health/8342454.stm</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=Category:CPAP_Definitions&diff=4160Category:CPAP Definitions2011-04-05T03:16:40Z<p>DreamDiver: /* R */</p>
<hr />
<div><!--Before editing this page, discuss it on the talk page and make sure there is a consensus about the changes you intend to make, otherwise there is a very high chance that your edits will be reverted.--><br />
[[Image: Home_Photo_books.jpg|right|thumb|150px|CPAP Defined]]<br />
These are common terms that people often need more information about. Articles can be linked to the term definitions which you are now viewing.<br />
<br />
Please be aware that some of the topic pages or member posts on the [http://www.cpaptalk.com CPAPtalk.com Member Forums] link to the CPAP Defined articles here.<br />
<br />
Go ahead, dive on in and improve the term definitions, or create new articles and propose to add them here to the CPAP Defined category on the [[{{TALKPAGENAME}}|discussion page]]. However, be aware that just because you add them to this CPAP Definitions category here on the wiki, it does not mean they will show up on the CPAPtalk Forum. To request that a new article or addition to the CPAP Defined category displays on the CPAPtalk.com Forum contact an [[Special:Listusers/sysop|Administrator]] on their [[Help:Talk_pages#User_Talk_pages|user talk page]].<br />
<br />
The Terms listed and defined here are those you need for a PSG (Sleep) Study. The terms that follow the list, are varios Sleep Apnea and CPAP terms. <br />
<br />
[http://www.cpaptalk.com/cpapedia.php?mode=view View the original archived CPAP Defined from the CPAPtalk Forum].<br />
<br />
==A==<br />
'''AHI/RAI Scale''' is a measurement of both the Apnea/Hypopnea Index (QHI) and the Respiratory Arousal Index. If a person has less than 5 events per hour then that person's AHI/RAI would be 0 and that person would not have apnea. 5 -15 events/hour = (mild); 15-30 events/hour = (moderate); >30 events/hour = (severe). <br />
<br />
'''Apnea''' is the cessation of airflow for 10 seconds or greater.<br />
<br />
'''AHI (Apnea Hypopnea Index)''' is the number of apneas and hypopneas per hour. Or an index for sleep apnea. 5-20 mild, 21-50 moderate, above 50 severe. Learn more [http://www.cpaptalk.com/wiki/index.php/Apnea_Hypopnea_Index here]<br />
<br />
'''Arousal''': An interruption of sleep lasting greater than 3 seconds.<br />
<br />
'''Automatic altitude adjustment''' allows the patient to travel to different altitudes without having the pressure setting adjusted. Because atmospheric pressure changes with altitude, most machines need adjustment in order to provide the correct pressure at a different altitude. see also [[Manual Altitude Adjustment]]<br />
<br />
An '''AutoPAP''' can be set to deliver a range of low/high pressures, customizable within 4 - 20 cm H2O. Learn more [http://www.cpaptalk.com/wiki/index.php/AutoPAP here]<br />
<br />
[http://www.cpaptalk.com/wiki/index.php/AFlex Aflex]<br />
<br />
==B==<br />
'''BR Arousal index''': The number of breathing related arousals(apnea, hypopnea, snoring & RERAs)multiplied by the # hours of sleep.<br />
<br />
'''Bruxism''': Grinding of the teeth.<br />
<br />
==C==<br />
'''Central apnea''': A respiratory episode where there is no airflow and no effort to breathe lasting greater than 10 seconds.<br />
<br />
==E==<br />
'''EEG/EOG''': Comments about sleep stages, brain waves (EEG), or eye movements (EOG)<br />
<br />
'''EKG/ECG''': Comments about heart rate, abnormal heart beats, etc.<br />
<br />
'''EMG''': Comments about leg movements and or teeth grinding (bruxism).<br />
<br />
==H==<br />
'''Hypopnea''': A respiratory episode where there is partial obstruction of the airway lasting greater than 10 seconds. Also called partial apnea or hypo-apnea.<br />
==N==<br />
'''Non-supine''': Sleeping in any position other than on the back.<br />
<br />
'''NSR''': Normal sinus rhythm. Refers to they way your heart beats.<br />
<br />
'''NPSG''': Nocturnal Polysomnogram, or sleep study.<br />
<br />
'''(#)Number of Awakenings''': The number of pages scored as wake after sleep onset.<br />
<br />
==O==<br />
'''Obstructive apnea''': A respiratory episode where there is a complete cessation of airflow, caused by an obstruction in the upper airway and accompanied by a struggle to breathe. To be defined as an obstructive apnea the episode should last 10 seconds or more.<br />
<br />
==P==<br />
'''Passover Humidifiers''' are used in conjunction with an xPAP machine to produce cool moisture, which flows from the xPAP, through a chamber filled with cool water, and to the mask. The purpose of a Passover humidifier is to keep the patient’s nasal passage from becoming dry and sore. A Passover humidifier is not plugged in to an electrical outlet and does not have a heater plate.<br />
<br />
'''PLMs''': Periodic limb movements.<br />
<br />
'''PLM arousal index''': The total number of periodic limb movements that cause arousals divided by the total number of hours of sleep.<br />
<br />
'''PSGT''': Polysomnographic technologist.<br />
<br />
==R==<br />
'''REM latency''': Latency to REM(dreaming) from sleep onset.<br />
<br />
'''RERAs''': Respiratory effort related arousals. Episodes that are not apneas or hypopneas, often related to loud snoring, that generally do not cause a decrease in oxygen saturation.<br />
<br />
'''Respiratory''': Any specific comments about respiratory events.<br />
<br />
'''[[ResScan]]''': Software provided by ResMed for use with their various flow generators (cpap machines).<br />
<br />
'''RPSGT''': Registered polysomnographic technologist.<br />
<br />
==S==<br />
'''Sleep efficiency''': Total sleep time divided by time in bed (expressed a fraction) or Total sleep time divided by time in bed x 100 (expressed as a percentage)<br />
<br />
'''Sleep latency''': The first 30 seconds (one `epoch' of recording time) of sleep.<br />
<br />
'''Sleep onset''': The first 90 seconds (3 `epochs) of uninterrupted sleep.<br />
<br />
'''Sleep stage shifts''': The number of incidents of sleep stage changes.<br />
<br />
'''Snoring intensity''': Level of snoring loudness determined by the sleep technologist. Ranging in degrees from mild to very loud snoring.<br />
<br />
'''Spontaneous arousal index''': The number of spontaneous arousals (e.g. arousals not related to respiratory events, limb movements, snoring, etc) multiplied by the number of hours of sleep.<br />
<br />
'''Stages of Sleep'''<br />
Stage 1: The lightest stage of sleep. Transitional stage from wake. top<br />
<br />
Stage 1 shifts: The number of times the sleep stage changed to stage 1.<br />
<br />
Stage 2: The first true stage of sleep.<br />
<br />
Stages 3/4: The deepest, most restorative sleep.<br />
<br />
'''Stage REM''': The dreaming stage; Normally occurs every 60-90 minutes.<br />
<br />
'''Supine''': Sleeping on back.<br />
==T==<br />
'''Time in bed''': The time in the study from `Lights Out' to `Lights On'.<br />
<br />
'''Total arousal index''': Total number of all arousals multiplied by the number of hours of sleep.<br />
<br />
'''Total # of PLMs''': The number of leg movements in sleep that last greater than 0.5 seconds.</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=Category:CPAP_Definitions&diff=4159Category:CPAP Definitions2011-04-05T03:16:14Z<p>DreamDiver: /* R */</p>
<hr />
<div><!--Before editing this page, discuss it on the talk page and make sure there is a consensus about the changes you intend to make, otherwise there is a very high chance that your edits will be reverted.--><br />
[[Image: Home_Photo_books.jpg|right|thumb|150px|CPAP Defined]]<br />
These are common terms that people often need more information about. Articles can be linked to the term definitions which you are now viewing.<br />
<br />
Please be aware that some of the topic pages or member posts on the [http://www.cpaptalk.com CPAPtalk.com Member Forums] link to the CPAP Defined articles here.<br />
<br />
Go ahead, dive on in and improve the term definitions, or create new articles and propose to add them here to the CPAP Defined category on the [[{{TALKPAGENAME}}|discussion page]]. However, be aware that just because you add them to this CPAP Definitions category here on the wiki, it does not mean they will show up on the CPAPtalk Forum. To request that a new article or addition to the CPAP Defined category displays on the CPAPtalk.com Forum contact an [[Special:Listusers/sysop|Administrator]] on their [[Help:Talk_pages#User_Talk_pages|user talk page]].<br />
<br />
The Terms listed and defined here are those you need for a PSG (Sleep) Study. The terms that follow the list, are varios Sleep Apnea and CPAP terms. <br />
<br />
[http://www.cpaptalk.com/cpapedia.php?mode=view View the original archived CPAP Defined from the CPAPtalk Forum].<br />
<br />
==A==<br />
'''AHI/RAI Scale''' is a measurement of both the Apnea/Hypopnea Index (QHI) and the Respiratory Arousal Index. If a person has less than 5 events per hour then that person's AHI/RAI would be 0 and that person would not have apnea. 5 -15 events/hour = (mild); 15-30 events/hour = (moderate); >30 events/hour = (severe). <br />
<br />
'''Apnea''' is the cessation of airflow for 10 seconds or greater.<br />
<br />
'''AHI (Apnea Hypopnea Index)''' is the number of apneas and hypopneas per hour. Or an index for sleep apnea. 5-20 mild, 21-50 moderate, above 50 severe. Learn more [http://www.cpaptalk.com/wiki/index.php/Apnea_Hypopnea_Index here]<br />
<br />
'''Arousal''': An interruption of sleep lasting greater than 3 seconds.<br />
<br />
'''Automatic altitude adjustment''' allows the patient to travel to different altitudes without having the pressure setting adjusted. Because atmospheric pressure changes with altitude, most machines need adjustment in order to provide the correct pressure at a different altitude. see also [[Manual Altitude Adjustment]]<br />
<br />
An '''AutoPAP''' can be set to deliver a range of low/high pressures, customizable within 4 - 20 cm H2O. Learn more [http://www.cpaptalk.com/wiki/index.php/AutoPAP here]<br />
<br />
[http://www.cpaptalk.com/wiki/index.php/AFlex Aflex]<br />
<br />
==B==<br />
'''BR Arousal index''': The number of breathing related arousals(apnea, hypopnea, snoring & RERAs)multiplied by the # hours of sleep.<br />
<br />
'''Bruxism''': Grinding of the teeth.<br />
<br />
==C==<br />
'''Central apnea''': A respiratory episode where there is no airflow and no effort to breathe lasting greater than 10 seconds.<br />
<br />
==E==<br />
'''EEG/EOG''': Comments about sleep stages, brain waves (EEG), or eye movements (EOG)<br />
<br />
'''EKG/ECG''': Comments about heart rate, abnormal heart beats, etc.<br />
<br />
'''EMG''': Comments about leg movements and or teeth grinding (bruxism).<br />
<br />
==H==<br />
'''Hypopnea''': A respiratory episode where there is partial obstruction of the airway lasting greater than 10 seconds. Also called partial apnea or hypo-apnea.<br />
==N==<br />
'''Non-supine''': Sleeping in any position other than on the back.<br />
<br />
'''NSR''': Normal sinus rhythm. Refers to they way your heart beats.<br />
<br />
'''NPSG''': Nocturnal Polysomnogram, or sleep study.<br />
<br />
'''(#)Number of Awakenings''': The number of pages scored as wake after sleep onset.<br />
<br />
==O==<br />
'''Obstructive apnea''': A respiratory episode where there is a complete cessation of airflow, caused by an obstruction in the upper airway and accompanied by a struggle to breathe. To be defined as an obstructive apnea the episode should last 10 seconds or more.<br />
<br />
==P==<br />
'''Passover Humidifiers''' are used in conjunction with an xPAP machine to produce cool moisture, which flows from the xPAP, through a chamber filled with cool water, and to the mask. The purpose of a Passover humidifier is to keep the patient’s nasal passage from becoming dry and sore. A Passover humidifier is not plugged in to an electrical outlet and does not have a heater plate.<br />
<br />
'''PLMs''': Periodic limb movements.<br />
<br />
'''PLM arousal index''': The total number of periodic limb movements that cause arousals divided by the total number of hours of sleep.<br />
<br />
'''PSGT''': Polysomnographic technologist.<br />
<br />
==R==<br />
'''REM latency''': Latency to REM(dreaming) from sleep onset.<br />
<br />
'''RERAs''': Respiratory effort related arousals. Episodes that are not apneas or hypopneas, often related to loud snoring, that generally do not cause a decrease in oxygen saturation.<br />
<br />
'''Respiratory''': Any specific comments about respiratory events.<br />
<br />
'''[ResScan]''': Software provided by ResMed for use with their various flow generators (cpap machines).<br />
<br />
'''RPSGT''': Registered polysomnographic technologist.<br />
<br />
==S==<br />
'''Sleep efficiency''': Total sleep time divided by time in bed (expressed a fraction) or Total sleep time divided by time in bed x 100 (expressed as a percentage)<br />
<br />
'''Sleep latency''': The first 30 seconds (one `epoch' of recording time) of sleep.<br />
<br />
'''Sleep onset''': The first 90 seconds (3 `epochs) of uninterrupted sleep.<br />
<br />
'''Sleep stage shifts''': The number of incidents of sleep stage changes.<br />
<br />
'''Snoring intensity''': Level of snoring loudness determined by the sleep technologist. Ranging in degrees from mild to very loud snoring.<br />
<br />
'''Spontaneous arousal index''': The number of spontaneous arousals (e.g. arousals not related to respiratory events, limb movements, snoring, etc) multiplied by the number of hours of sleep.<br />
<br />
'''Stages of Sleep'''<br />
Stage 1: The lightest stage of sleep. Transitional stage from wake. top<br />
<br />
Stage 1 shifts: The number of times the sleep stage changed to stage 1.<br />
<br />
Stage 2: The first true stage of sleep.<br />
<br />
Stages 3/4: The deepest, most restorative sleep.<br />
<br />
'''Stage REM''': The dreaming stage; Normally occurs every 60-90 minutes.<br />
<br />
'''Supine''': Sleeping on back.<br />
==T==<br />
'''Time in bed''': The time in the study from `Lights Out' to `Lights On'.<br />
<br />
'''Total arousal index''': Total number of all arousals multiplied by the number of hours of sleep.<br />
<br />
'''Total # of PLMs''': The number of leg movements in sleep that last greater than 0.5 seconds.</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=Software&diff=4158Software2011-04-05T03:07:44Z<p>DreamDiver: </p>
<hr />
<div>Modern CPAP machines come in many flavors. Long-time forum members suggest that newbies acquire a CPAP machine that is '''fully data-capable'''. This means a great deal of information is stored on a transportable card, usually either a smart card, a USB stick or an SD card. The card is ostensibly supposed to be sent to the doctor or the DME, but many doctors and DME's don't even own the software to read the data off your card. DME's are primarily interested in your compliance data for insurance purposes. The real beauty of the software comes into play when the user can review data and compare with previous nights of data to see trends in improvement and to learn during what part of the night large leaks are occurring.<br />
<br />
Some software companies have come up with a patient version of the software which is less powerful than the proposed DME/Doctor version. These are generally considered card 'reader' software. They generally don't edit the card.<br />
<br />
Some CPAP makers actually include the software with their machines. Others expect the user to buy the software separately. Some have an online system that allows you to punch in a code from your machine to get general statistics. Still others allow a few interested users to download the software directly from their site.<br />
<br />
These companies offer software in various forms either to consultants or to patients:<br />
<br />
* ResMed offers [[ResScan]].<br />
* Philips Respironics offers EncoreViewer.<br />
* DeVilbiss offers SmartLink.<br />
* Fisher & Paykel offer Performance Maximizer.<br />
<br />
Modern machines are generally using either SD cards or USB adapters. Some older machines use smart cards. If you have an older machine, you may need to buy an adapter to read the smart card.</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=Software&diff=4157Software2011-04-05T03:04:34Z<p>DreamDiver: </p>
<hr />
<div>Modern CPAP machines come in many flavors. Long-time forum members suggest that newbies acquire a CPAP machine that is '''fully data-capable'''. This means a great deal of information is stored on a transportable card, usually either a smart card, a USB stick or an SD card. The card is ostensibly supposed to be sent to the doctor or the DME, but many doctors and DME's don't even own the software to read the data off your card. DME's are primarily interested in your compliance data for insurance purposes. The real beauty of the software comes into play when the user can review data and compare with previous nights of data to see trends in improvement and to learn during what part of the night large leaks are occurring.<br />
<br />
Some software companies have come up with a patient version of the software which is less powerful than the proposed DME/Doctor version. These are generally considered card 'reader' software. They generally don't edit the card.<br />
<br />
Some CPAP makers actually include the software with their machines. Others expect the user to buy the software separately. Some have an online system that allows you to punch in a code from your machine to get general statistics. Still others allow a few interested users to download the software directly from their site.<br />
<br />
These companies offer software in various forms either to consultants or to patients:<br />
<br />
ResMed offers [[ResScan]].<br />
Philips Respironics offers EncoreViewer.<br />
DeVilbiss offers SmartLink.<br />
Fisher & Paykel offer Performance Maximizer.<br />
<br />
Modern machines are generally using either SD cards or USB adapters. Some older machines use smart cards. If you have an older machine, you may need to buy an adapter to read the smart card.</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=Software&diff=4156Software2011-04-05T03:01:12Z<p>DreamDiver: New page: Modern CPAP machines come in many flavors. The most important type of machine to get is one that is fully-data-capable. This means a great deal of information is stored on a transportable ...</p>
<hr />
<div>Modern CPAP machines come in many flavors. The most important type of machine to get is one that is fully-data-capable. This means a great deal of information is stored on a transportable card, usually either a smart card or an SD card. The card is ostensibly supposed to be sent to the doctor or the DME, but many doctors and DME's don't even own the software to read the data off your card. They are primarily interested in your compliance data. The real beauty of the software comes into play when the user can review data and compare with previous nights of data to see trends in improvement and learn when during the night large leaks are occuring.<br />
<br />
Some software companies have come up with a patient version of the software which is less powerful than the proposed DME/Doctor version. These are generally considered card 'reader' software. They generally don't edit the card.<br />
<br />
Some CPAP makers actually include the software with their machines. Others expect the user to buy the software separately. Some have an online system that allows you to punch in a code from your machine to get general statistics. Still others allow a few interested users to download the software directly from their site.<br />
<br />
These companies offer software in various forms either to consultants or to patients:<br />
<br />
ResMed offers [[ResScan]].<br />
Philips Respironics offers EncoreViewer.<br />
DeVilbiss offers SmartLink.<br />
Fisher & Paykel offer Performance Maximizer.<br />
<br />
Modern machines are generally using either SD cards or USB adapters. Some older machines use smart cards. If you have an older machine, you may need to buy an adapter to read the smart card.</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=ResScan&diff=4155ResScan2011-04-05T02:43:57Z<p>DreamDiver: </p>
<hr />
<div>ResScan is [[software]] for viewing data from the ResMed series cpap machines.<br />
PM either [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=38643 Uncle_Bob], [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=53336 BernieRay] or [http://www.cpaptalk.com/memberlist.php?mode=viewprofile&u=19739 DreamDiver] for information on how to get the software.<br />
<br />
To see a tutorial on how to get around in ResScan, go [http://montfordhouse.com/cpap/resscan_tutorial here]. This tutorial was done in 3.12, but is appropriate for versions 3.10 through 3.13. The most current version as of April 4, 2011, is 3.13. Most people find 3.12 to be more stable than 3.13. There are some render issues in 64-bit Windows 7 with this software, so it may be best to install it in xp mode if you have trouble with it.<br />
<br />
To add tidal volume and respiratory rate to your navigation and detail pane for the S9 for v3.12, use [http://www.cpaptalk.com/viewtopic.php?p=544860#p544860 gvz's directions].<br />
<br />
To add tidal volume and respiratory rate for the S9 in v3.13, use [http://www.cpaptalk.com/viewtopic.php?p=565846#p565846 BernieRay's directions].</div>DreamDiverhttps://www.cpaptalk.com/wiki/index.php?title=ResScan&diff=4154ResScan2011-04-05T02:16:36Z<p>DreamDiver: New page: ResScan is software for viewing data from the ResMed series cpap machines. PM either Uncle_Bob, BernieRay or DreamDiver for information on how to get the software. To see a tutorial on ho...</p>
<hr />
<div>ResScan is software for viewing data from the ResMed series cpap machines.<br />
PM either Uncle_Bob, BernieRay or DreamDiver for information on how to get the software.<br />
<br />
To see a tutorial on how to get around in ResScan, go [http://montfordhouse.com/cpap/resscan_tutorial here]. This tutorial was done in 3.12, but is appropriate for versions 3.10 through 3.13. The most current version as of April 4, 2011, is 3.13. Most people find 3.12 to be more stable than 3.13. There are some render issues in 64-bit Windows 7 with this software, so it may be best to install it in xp mode if you have trouble with it.<br />
<br />
To add tidal volume and respiratory rate to your navigation and detail pane for the S9 for v3.12, use [http://www.cpaptalk.com/viewtopic.php?p=544860#p544860 gvz's directions].<br />
<br />
To add tidal volume and respiratory rate for the S9 in v3.13, use [http://www.cpaptalk.com/viewtopic.php?p=565846#p565846 BernieRay's directions].</div>DreamDiver