CPAPtalk.com

I'm running 0.9.6 on under Windows 7 Pro on a quad-core i7-4770 @ 3.40GHz and 32 GB RAM. As you might expect, it flies. It has been stable, with no crashes.

Where should I send possible bugs I've noticed (and feature requests, if they're desired)? Thanks!

-- Eric

Mark,

Again, thanks so much for this beautiful work.

A minor matter on the Mac 0.9.6 version - rearranging/promoting the order of the charts (specifically "Leak") doesn't seem to "stick" after a quit and restart. Not sure whether this is a small bug to be squashed or just an as yet unimplemented feature, but thought you would want to know.

Best wishes, Nate

When I downloaded 0.9.6 and tried to run it it complained about missing DLLs I tracked down a couple but ran out of time and reverted to 0.9.5 which ran fine from the download.
Am I the only one with that problem. I am running Windows 7 Pro on AMD 6 core 3.8 Ghz 16 GB of RAM so performance is not an issue, when it runs.

bwexler wrote:When I downloaded 0.9.6 and tried to run it it complained about missing DLLs I tracked down a couple but ran out of time and reverted to 0.9.5 which ran fine from the download.
Am I the only one with that problem. I am running Windows 7 Pro on AMD 6 core 3.8 Ghz 16 GB of RAM so performance is not an issue, when it runs.

Try this version instead:

http://sourceforge.net/projects/sleepyh ... p/download

I think the link in the first post by Mark has been fixed.

It's explained in the first page or two of posts. Mark left out a .dll library from the distribution. This is the updated version of the distribution zip file that includes the missing file. There is a workaround listed earlier in this thread, but it's easiest to just download the new package.

However, you mention "DLL's" as in more than one? Did you get a message about DLL's other than MSVCR120? If so, are you running the program from the directory you extracted the entire package to? If you got any other missing DLL messages, I'm sure Mark would like to know which ones.

archangle wrote:Try this version instead:

http://sourceforge.net/projects/sleepyh ... p/download

I think the link in the first post by Mark has been fixed.

If your using Windows 7 or 8 isn't that version the slow version. Didn't he have another version that was faster and for better graphics systems.

Yes I downloaded 2 DLLs.when it told me of the third missing DLL I just quit.
I will try the newer download. Thank you.

Is there a win version without the GL part? My Win 7 Pro system tells me I don't need that - I tried running the version with broken GL in the title. If anyone can point me in the right direction I would appreciate it.

Just now I tried to compile from source on Xubuntu 13.10 x86_64. The following commands all worked without error until "make" at the end:

git clone git://git.code.sf.net/p/sleepyhead/code ~/Software/sleepyhead-code
sudo apt-get install qt4-dev-tools libqt4-opengl-dev libqtwebkit-dev zlib1g-dev
cd ~/Software/sleepyhead-code
qmake
make -j2

Here is what happend at the make command:

make -j2
cd sleepyhead/ && ( test -e Makefile
|| /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /home/jjj/Software/Sleepyhead-code/sleepyhead/sleepyhead.pro
-o Makefile ) && make -f Makefile Project MESSAGE: Building with
QGLWidget gGraphView Project ERROR: Unknown module(s) in QT: serialport
make: *** [sub-sleepyhead-make_first-ordered] Error 3

I know zero about programming and very little about compiling from source. Over a year ago I did successfully compile 9.3 from source (following instructions from a user on Apnea Board), but this time I was not so lucky. I asked Mr. Google about the error and he provided me with several pages, but I couldn't understand enough to figure out a solution.

If anyone has any clues, please let me know.

jedimark wrote: ANGLE Build
For Windows Vista or higher (Uses DirectX to counter Intel graphics card driver problems)
http://sourceforge.net/projects/sleepyh ... p/download

Where has the ANGLE Build gone? I can't find it at Sourceforge.

Perhaps it's a silly question, but I'm going to ask it anyway:

I did something with the mouse and/or some combination of key strokes that has caused the Flow Rate graph to be "pinned" the say way the Event graph is pinned.

Now, it's not that I mind the graph being pinned. I actually kind of like the fact that I pinned it, but I have no idea what I did in order to pin the graph. And I'd like to be able to recreate the steps needed to pin and unpin a graph.

Can anybody help me out here?

robysue wrote:Perhaps it's a silly question, but I'm going to ask it anyway:

I did something with the mouse and/or some combination of key strokes that has caused the Flow Rate graph to be "pinned" the say way the Event graph is pinned.

Now, it's not that I mind the graph being pinned. I actually kind of like the fact that I pinned it, but I have no idea what I did in order to pin the graph. And I'd like to be able to recreate the steps needed to pin and unpin a graph.

Double click on the Flow rate text on the left side.

archangle wrote:

robysue wrote:Perhaps it's a silly question, but I'm going to ask it anyway:

I did something with the mouse and/or some combination of key strokes that has caused the Flow Rate graph to be "pinned" the say way the Event graph is pinned.

Now, it's not that I mind the graph being pinned. I actually kind of like the fact that I pinned it, but I have no idea what I did in order to pin the graph. And I'd like to be able to recreate the steps needed to pin and unpin a graph.

Double click on the Flow rate text on the left side.

Ah, that explains it. A random double click when the mouse was in a spot I wasn't aware was "active".

Thanks for teaching me this!

squid13 wrote:

Pugsy wrote:It does but for my S9 Adapt it is shown at the bottom of the statistics right above the session green/black bar at the bottom. It doesn't show up in the colored bar graphs where the PR S1 LL is shown.

It says "time over leak red line" and gives it in a percentage.

I'm using version 0.9.6 and am using a S9 Adapt Auto 36037 and I have none of what Pugsy is talking about, no time over leak red line.

I have a 36037, and I get it..

Do you have a red line over the top of your Leak chart? And is there a (ticked) option in the CPAP preferences tab, that says Show Leak Redline?

It was not in the 0.9.6 version that was floating around from ages ago..

squid13 wrote:I'm using version 0.9.6 and am using a S9 Adapt Auto 36037 and I have none of what Pugsy is talking about, no time over leak red line.

Did you get the "new" 0.9.6 version that is available in this thread or are you still using the "older" version I gave you a short while back. It was only with the new version that I got from this thread that the red line and % above red line showed up. I didn't have it with the version I gave you 2 or 3 weeks ago.

robysue wrote:I did something with the mouse and/or some combination of key strokes that has caused the Flow Rate graph to be "pinned" the say way the Event graph is pinned.

Now, it's not that I mind the graph being pinned. I actually kind of like the fact that I pinned it, but I have no idea what I did in order to pin the graph. And I'd like to be able to recreate the steps needed to pin and unpin a graph.

I had the same problem when I first used SleepyHead, too. Finally had to ask in the thread. I, too, like the feature; it prevents my accidentally scrolling down and getting the wrong graphs in my screen caps.

JediMark: It might be good to give some indication that clicking on the text will have that function -- maybe hover text or a right-click menu item? When I found my graph pinned, the first thing I did was hovered over the text and right clicked to see if it would give me an option.