CPAPtalk.com

MD, what happens when you try to print? Do you see the standard print dialog? Are there any print-related messages in the debug window (Help, check Debug)?

If you reorder graphs (hand icon on graph title) or change their size (dragging dividers), Reset Graph Layout is supposed to change everything back to the default.

Hey, just FYI, I downloaded and installed the latest build just now (0.8.5-3) and it installed and imported my data (Resmed S9 Elite) with no issues.

The data looks pretty awesome. Very impressive.

ok here's one.. why don't these stats line up? Look at my leak rate

scottjf8, probably a scale/conversion issue.

Brand new CPAP user (almost one week) with ResMed S9 Elite. [Have lots to learn...]

SleepyHead 0.8.5 downloaded and installed fine on OS X 10.6.8. Imported data with no problems.

Only one error observed so far - calculated sleep time is wrong for one date.

Overview shows 12:34 (12 hours and 34 minutes) of sleep on 9/22.

I look at the daily view for this date and it shows Sleep: 23:40 and Wake: 05:58 with Hours = 12:34:02. (Wrong)

For comparison purposes, if I look at 9/21, it shows Sleep: 23:22 and Wake: 06:00 with Hours = 06:38:04. (Correct)

For some reason, the math appears to work fine for 9/21, but not for 9/22.

I see only one sessionID listed for 9/21, but three for 9/22.

Here is the session info from the Details section for 9/22. It seems odd that two sessions would have the same Start Times and End Times...

SessionID -- Date --- Start - End
1316749217 9/22/11 23:40 23:40
1316749284 9/22/11 23:41 05:58
1316749290 9/22/11 23:41 05:58


===== One more observation: It looks like the "Min Avg 90% Max" table is not generated for days on which I have more than one session ID.

===== One comment: I find the use of "Sleep" and "Wake" to be a little bit misleading. Might be better to refer to "Start" and "Stop" as is displayed in the list of Session ID's (copied above).


Thanks for making this available. I look forward to testing and learning more!

Breathe Jimbo wrote:MD, what happens when you try to print? Do you see the standard print dialog? Are there any print-related messages in the debug window (Help, check Debug)?

Thanks for prompt response, Jimbo.

Sorry, I wasn't specific enough. I can print the overview page, including if zoomed in.

If I try to print from the daily page I get the dialog, "Sorry,printing from this page is not supported yet." I'm guessing you already knew that.

There does seem to be a problem with the "settings" graph. In my case, the humidifier settings vary from 2-4 and Flex is off. Here's the overview graph.

http://i1181.photobucket.com/albums/x42 ... 5043AM.png

Should I be able to upload the CMS50?

Two things I notice: Snore is coming up with some really funky numbers, even tho there's nothing on the graph:
Min Avg 90% Max
Pressure 10.00 10.00 10.00 10.00
Leaks 41.00 52.80 60.00 69.00
Snore 27642285272242061312.00 0.00 0.00 27642285272242061312.00

And a suggestion on the Pressure graph, it should always start the Y axis at 0. My pressure is 10 and and the Y axis starts at 10 so it looks like I have no pressure! (not too important to me really, I'm on straight CPAP right now).

milw wrote:Snore 27642285272242061312.00 0.00 0.00 27642285272242061312.00

Are you using the most recent build? I ask because that reminds me of a bug that was fixed a long time ago.

Snore was fixed here:

viewtopic.php?f=1&t=68049&p=632544&hili ... ac#p632544

Latest version of SH:
http://sourceforge.net/projects/sleepyhead/files/

M.D.Hosehead wrote:

Breathe Jimbo wrote:MD, what happens when you try to print? Do you see the standard print dialog? Are there any print-related messages in the debug window (Help, check Debug)?

Thanks for prompt response, Jimbo.

Sorry, I wasn't specific enough. I can print the overview page, including if zoomed in.

If I try to print from the daily page I get the dialog, "Sorry,printing from this page is not supported yet." I'm guessing you already knew that.

There does seem to be a problem with the "settings" graph. In my case, the humidifier settings vary from 2-4 and Flex is off. Here's the overview graph.

http://i1181.photobucket.com/albums/x42 ... 5043AM.png

Should I be able to upload the CMS50?

I just noticed the Settings graph is out too. Looking into it. I'm thinking it's just a scaling bug in the graphs.. The data itself shown in the tooltips should be correct. The legend values should also be correct.. (they are an average, so won't be a whole number)

The serial CMS50 tab is being neglected while the rest gets ready.. I do plan on assaulting it's dodgyness as soon as I get these other bugs out of the way in daily & overview. Oximetry is one feature I really want working.

Printing is still only overview.. Still got some more stuff to figure out for printing from daily.. I'm started planning a reporting template language, but had to background it for now because of crummy brain fog.. I'll see what happens when I next get a clear day..

Jedi,

You've contributed so much that helps so many people, despite brain fog. Consider starting a thread to see what ideas others may have that might ameliorate your fogginess. I'm sure there are many here who would like to help.

If you would like to be notified of SleepyHead updates, please join the sleepyhead-devel mailing list at:

https://lists.sourceforge.net/lists/lis ... head-devel

You may need to create a sourceforge account first.

New tester here. Has anyone been able to get Sleepyhead to work with oximeter data yet? I have the Contac CMS 50F and an iMac with Snow Leopard. Thanks.

Welcome aboard, bombadil! Be sure to join the sleepyhead-devel mailing list (see above) to be notified of future updates. Mark, the developer, recognizes that oximetry needs more work.

Thanks, Jimbo. I have joined the list. I'm a former PC developer myself, so I kind of understand how the development work goes. Can't do everything at once.