Page 2 of 3

Re: Thoughts on a good lubricant?

Posted: Sat Nov 13, 2010 5:38 pm
by trike-mike
Hmm.... Some really interesting thoughts put forth here. Some good ideas on ways to correct that squeak as well.....

I might try to wash first and failing that, use the Dremel at low speed with a soft buffing wheel on it first to see if that provides a longer term fix. See if I can do it dry to keep it from collecting stuff. Maybe will put just a dash of lubricant on for good measure....

Re: Thoughts on a good lubricant?

Posted: Sat Nov 13, 2010 6:26 pm
by GumbyCT
If Cleaning with soap n water the soap will help to lubricate. You may already have Ayr gel (or KY), or Lansinoh on hand.

Re: Thoughts on a good lubricant?

Posted: Sat Nov 13, 2010 6:40 pm
by LinkC
I vote for the nipple grease. I put it on my nose every night and it hasn't killed me yet.

Re: Thoughts on a good lubricant?

Posted: Sat Nov 13, 2010 8:58 pm
by imsleepynomore
I use Ocu-glide it is a silicone lubricant for artifical eyes I have been using it for over a year I figure if it is safe enough for an artifical eye it is safe for my facemask swivel. you can check on line http://www.ocuglide.com or any ocularist these are the people that make prosthetic eyes .

Re: Thoughts on a good lubricant?

Posted: Sun Nov 14, 2010 3:45 pm
by spitintheocean
I applied teflon tape about eight months ago; It worked perfectly. Immediately the squeaking stopped, noise levels while resting really dropped, and my overall leak rates vitually flat-lined. No muss, no fuss, no odors, and its totally reversible.

And I finally got around to fixing the leaking shower head .......

Re: Thoughts on a good lubricant?

Posted: Mon Nov 15, 2010 8:30 am
by Joe50
Spray a little non-butter flavored Pam on a q-tip and run it around the offending area.

Re: Thoughts on a good lubricant?

Posted: Mon Nov 15, 2010 9:05 am
by xenablue
OutaSync wrote:KY Jelly or AstroGlide? Since everybody already has those.
Well..... seeing I am a member of 'everybody' LOL - I tried KY on the hose swivel ........ without success. Today I'll try washing and buffing - a combo of 2 other suggestions, before I move onto other high-tech ideas.

Cheers,
xena

Re: Thoughts on a good lubricant?

Posted: Mon Nov 15, 2010 9:27 am
by carbonman
spitintheocean wrote:I applied teflon tape six about eight months ago;
Buffing, grinding, lubing after every wash.....
way over engineered.
I wrapped the joint on my mask well over 2yrs ago...
hasn't made a sound since.

Re: Thoughts on a good lubricant?

Posted: Mon Nov 15, 2010 9:45 am
by xenablue
.... or teflon tape.... hmmmm, I have that next to the KY. Low-tech sounds good to me

xena

Re: Thoughts on a good lubricant?

Posted: Mon Nov 15, 2010 11:47 am
by trike-mike
xenablue wrote:.... or teflon tape.... hmmmm, I have that next to the KY. Low-tech sounds good to me

xena
Hmm... One wonders what else is in the ol' nightstand.

BTW, a wrap of teflon tape did it for me...

Re: Thoughts on a good lubricant?

Posted: Mon Nov 15, 2010 12:04 pm
by xenablue
trike-mike wrote:
xenablue wrote:.... or teflon tape.... hmmmm, I have that next to the KY. Low-tech sounds good to me

xena
Hmm... One wonders what else is in the ol' nightstand.

BTW, a wrap of teflon tape did it for me...
not telling...

Re: Thoughts on a good lubricant?

Posted: Mon Nov 15, 2010 12:27 pm
by OutaSync
Oh! You meant the mask?!

Re: Thoughts on a good lubricant?

Posted: Mon Nov 15, 2010 12:31 pm
by trike-mike
Yes. Just for a bit of spice and put the CPAP on after.....

Re: Thoughts on a good lubricant?

Posted: Mon Nov 15, 2010 12:32 pm
by chunkyfrog

Re: Thoughts on a good lubricant?

Posted: Mon Nov 15, 2010 12:46 pm
by xenablue