Posted: Sun Aug 28, 2005 11:05 pm
I can't say I ever loved my Breeze but I did make it work for a little over 3 months way back when the only options in nare-direct interfacers were Nasalaire, Breeze, and Adams Curcuit. I know for some people its the cat's meow but I couldn't use it without a lot of extra help...I just don't have the right shapped head for it. I am so glad there are more options now....I think RG and I started xPAP around the same time 2 years ago- do you remember what our options were? There were no Activas, Swift, Comfort Lite, Comfort Curve, Auroa, and so many more I haven't even considered.
My first mask was an Ultra Mirage...still pull it out from time to time.
Second was Simplicity...I needed something that didn't hit the bridge of my nose and it was one of the few options at the time. Next was the Activa- it came out just after I got my equipment and I loved even though it does pulse a lot with BiPAP ST at 12.5/7. The last time I pulled it out to try I found I've totally lost the callus on the bridge of my nose and it felt like I was getting hit there with every breath cycle...good thing my Mom likes Activas so my two went to go use. Next up was the Breeze which I already mentioned...and wouldn't you know it 2 weeks after I got it the Comfortlite was introduced so soon as my 3 month waiting was up for a new mask through insuracne I had to have it. Comfortlite worked well but I didn't find it held up as well as I had hoped. I got a Snapp which I used briefly- still pull it out from time to time but I thought I had found the perfect mask when I finally tried the Swift...used that for 8 months until recently when I got a ComfortCurve, which was great after a minor modification.
The 4 masks I would recomend based on my experiences are Swift, Comfort Curve, Activa, Ultra Mirage. For now I am using the ComfortCurve primarily and Swift occasionally. If I had to go back to a regular nasal mask it would be the Ultra Mirage.
One thing I have learned over the past couple years is that you shouldn't rely on other opinions exclusively- you need to try a mask for yourself before you rule it out. I hadn't heard that much good about the ComfortCurve and almost didn't get it but I'm glad I did. The second thing I've learned is don't be afraid to make modifications to your mask & headgear- make it work for you. I tried the pantiliner trick with my ComfortCurve but I was worried about my allergy to adhesives so in the middle of the night I trimmed the silicone check pads down so they are half as thick and it works great.
The third thing I learned is to be prepared....always have a spare mask- preferably a completely different style for those bad fit nights. If you've tried all the normal, minor adjustments with no improvement just set it aside and put on mask B...it will save you a lot frustation and your headgear won't be all un-adjusted the next night. Of course the backup mask is also good for those times you have irritation and need something that hits different spots for a couple of nights. Another major part of being prepared is to have stuff handy for minor repairs...I know I'm not the only one who has plumbers teflon tape in their night stand, along with some electrical tape, rubber bands, hair scrunchies, etc. There will come a time when you have an anoying leak were two parts connect or something will break- its a lot less frustrating if you have everything within reach.
My first mask was an Ultra Mirage...still pull it out from time to time.
Second was Simplicity...I needed something that didn't hit the bridge of my nose and it was one of the few options at the time. Next was the Activa- it came out just after I got my equipment and I loved even though it does pulse a lot with BiPAP ST at 12.5/7. The last time I pulled it out to try I found I've totally lost the callus on the bridge of my nose and it felt like I was getting hit there with every breath cycle...good thing my Mom likes Activas so my two went to go use. Next up was the Breeze which I already mentioned...and wouldn't you know it 2 weeks after I got it the Comfortlite was introduced so soon as my 3 month waiting was up for a new mask through insuracne I had to have it. Comfortlite worked well but I didn't find it held up as well as I had hoped. I got a Snapp which I used briefly- still pull it out from time to time but I thought I had found the perfect mask when I finally tried the Swift...used that for 8 months until recently when I got a ComfortCurve, which was great after a minor modification.
The 4 masks I would recomend based on my experiences are Swift, Comfort Curve, Activa, Ultra Mirage. For now I am using the ComfortCurve primarily and Swift occasionally. If I had to go back to a regular nasal mask it would be the Ultra Mirage.
One thing I have learned over the past couple years is that you shouldn't rely on other opinions exclusively- you need to try a mask for yourself before you rule it out. I hadn't heard that much good about the ComfortCurve and almost didn't get it but I'm glad I did. The second thing I've learned is don't be afraid to make modifications to your mask & headgear- make it work for you. I tried the pantiliner trick with my ComfortCurve but I was worried about my allergy to adhesives so in the middle of the night I trimmed the silicone check pads down so they are half as thick and it works great.
The third thing I learned is to be prepared....always have a spare mask- preferably a completely different style for those bad fit nights. If you've tried all the normal, minor adjustments with no improvement just set it aside and put on mask B...it will save you a lot frustation and your headgear won't be all un-adjusted the next night. Of course the backup mask is also good for those times you have irritation and need something that hits different spots for a couple of nights. Another major part of being prepared is to have stuff handy for minor repairs...I know I'm not the only one who has plumbers teflon tape in their night stand, along with some electrical tape, rubber bands, hair scrunchies, etc. There will come a time when you have an anoying leak were two parts connect or something will break- its a lot less frustrating if you have everything within reach.