Posted: Sat Apr 07, 2007 11:38 pm
Hi, me again, I found the posting! Thank you Linda3032!
*******
Joined: 29 Nov 2005
Posts: 1931
Location: Rural Arkansas
Posted: Fri Feb 09, 2007 1:23 am Post subject: Delete Spam
--------------------------------------------------------------------------------
Actually, none of this will probably help you tonight. But just in case you aren't doing all of these things, here's my pre-printed remedies. Sorry I can't be of more help.
Rainout occurs when you are using a heated humidifier and start getting condensation in your hose. It's caused by the steamy air coming from the humidifier at a higher temperature than the surrounding room air, so it cools on the way to the mask. While it leaves the humidifier as "humid air" when it cools, it reaches the mask as condensed fluid / "water" and you get a damp face.
Ways to try to avoid rainout:
1. Keep your xpap machine below the level of the mattress, as low to the floor as possible.
2. Use hose covers – flannel or fleece tubing to cover your hose. Use as many as necessary. (I use three covers on my Aussie heated hose and I still get a few droplets of rainout using my Aura – but I appear to be an exception, not the rule).
3. Run your heated humidifier as low as you comfortably can.
4. If your hose runs up over your head, try not to raise it really high to where it has a long drop back down to your head.
5. Raise your room temperature as high as you are can and still sleep comfortably.
6. Nasal pillows are usually more prone to rainout than masks.
7. If all else fails, purchase an Aussie Heated Hose from Australia. Not only does it help prevent rainout, but it also warms the air before it hits your face and/or up your nose. Here’s the site:
http://www.sleepzone.com.au
_________________
CPAPopedia Keywords Contained In This Post (Click For Definition): humidifier, hose, tubing, rainout, Aura, Nasal Pillows
_________________
Remstar Auto C-Flex set @ 7-7.5
Remstar Heated Humidifier set @ 1
Invacare Twilight NP Aura (de-cap-itated)
Compliant since April 2003
*******
Joined: 29 Nov 2005
Posts: 1931
Location: Rural Arkansas
Posted: Fri Feb 09, 2007 1:23 am Post subject: Delete Spam
--------------------------------------------------------------------------------
Actually, none of this will probably help you tonight. But just in case you aren't doing all of these things, here's my pre-printed remedies. Sorry I can't be of more help.
Rainout occurs when you are using a heated humidifier and start getting condensation in your hose. It's caused by the steamy air coming from the humidifier at a higher temperature than the surrounding room air, so it cools on the way to the mask. While it leaves the humidifier as "humid air" when it cools, it reaches the mask as condensed fluid / "water" and you get a damp face.
Ways to try to avoid rainout:
1. Keep your xpap machine below the level of the mattress, as low to the floor as possible.
2. Use hose covers – flannel or fleece tubing to cover your hose. Use as many as necessary. (I use three covers on my Aussie heated hose and I still get a few droplets of rainout using my Aura – but I appear to be an exception, not the rule).
3. Run your heated humidifier as low as you comfortably can.
4. If your hose runs up over your head, try not to raise it really high to where it has a long drop back down to your head.
5. Raise your room temperature as high as you are can and still sleep comfortably.
6. Nasal pillows are usually more prone to rainout than masks.
7. If all else fails, purchase an Aussie Heated Hose from Australia. Not only does it help prevent rainout, but it also warms the air before it hits your face and/or up your nose. Here’s the site:
http://www.sleepzone.com.au
_________________
CPAPopedia Keywords Contained In This Post (Click For Definition): humidifier, hose, tubing, rainout, Aura, Nasal Pillows
_________________
Remstar Auto C-Flex set @ 7-7.5
Remstar Heated Humidifier set @ 1
Invacare Twilight NP Aura (de-cap-itated)
Compliant since April 2003