Having an amazing time with the Bleep mask except for a small drop of water every morning that tickles my nose. Anyways, I looked at my data last night and saw something new and wanted to find out what it was. You can see below. In my wiki research I have no idea what to make of it and it's probably nothing. You can see it on the far right for last night.
I went on a run for the first time in a month or two yesterday which might explain it.
Abnormal data in venting and respiratory rate
- BatmanMatt
- Posts: 76
- Joined: Sat Dec 04, 2021 8:04 am
Abnormal data in venting and respiratory rate
_________________
Machine: AirSense 11 Autoset |
Mask: Bleep DreamPort CPAP Mask Solution |
Additional Comments: Heated tubing |
- Attachments
-
- Screen Shot 2022-01-25 at 7.12.14 AM.png (868.98 KiB) Viewed 2289 times
Airsense 11 w/ heated tubing
Bleep Dreamport System!!!
Bleep Dreamport System!!!
- Dog Slobber
- Posts: 3961
- Joined: Thu Feb 15, 2018 2:05 pm
- Location: Ontario, Canada
Re: Abnormal data in venting and respiratory rate
Did you upgrade to OSCAR 1.3.1?
I did and got a similar "abnormality" last night.
I *believe* it's because of how OSCAR collects data. In 1.3.0*, OSCAR immediately started collecting data when the device came on, the various metrics don't all start up at the same time. Therefore, almost always many of them will have a value of 0.
A 0 value for Minute Vent, Tidal Volume, Respiratory Rate, is kind of a silly metric. The development team delayed the data gathering of some of the metrics (for statistics) until those metrics have come up to speed.
Last night and likely future statistics are the more meaningful values.
This is document in the OSCAR changelog, perhaps BlueDragon and verify.
I did and got a similar "abnormality" last night.
I *believe* it's because of how OSCAR collects data. In 1.3.0*, OSCAR immediately started collecting data when the device came on, the various metrics don't all start up at the same time. Therefore, almost always many of them will have a value of 0.
A 0 value for Minute Vent, Tidal Volume, Respiratory Rate, is kind of a silly metric. The development team delayed the data gathering of some of the metrics (for statistics) until those metrics have come up to speed.
Last night and likely future statistics are the more meaningful values.
This is document in the OSCAR changelog, perhaps BlueDragon and verify.
*corrected version number in how older OSCAR collected data.BlueDragon wrote: ↑Sun Jan 23, 2022 11:01 pmOSCAR v1.3.1 is released
...
[*][new] Skip first 20 seconds of TiVol, RR, and MinVent in ResMed loader.
...
[*][fix] Skip first 10 seconds of pressure data for ResMed grapths and statistics.
...
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
Additional Comments: Min EPAP: 8.2, Max IPAP: 25, PS:4 |
Last edited by Dog Slobber on Tue Jan 25, 2022 8:42 am, edited 1 time in total.
- BlueDragon
- Posts: 541
- Joined: Sun May 27, 2018 10:20 am
- Location: Sonoran Desert
Re: Abnormal data in venting and respiratory rate
It was 1.3.0 that has that problem. 1.3.1 fixes it.Dog Slobber wrote: ↑Tue Jan 25, 2022 8:12 amI *believe* it's because of how OSCAR collects data. In 1.3.1, OSCAR immediately started collecting data when the device came on, the various metrics don't all start up at the same time. Therefore, almost always many of them will have a value of 0.
After installing 1.3.1, purge the current day and re-import. The problem should be solved. Let me know if it isn't.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Brevida™ Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Dx Mar 2018 (AHI=24, RDI=54; AHI=73 supine). Started APAP June 2018, VAuto Aug 2020. |
OSCAR 1.5.1 is the latest release.
OSCAR Team
ResMed AirCurve 10 VAuto, F&P Brevida.
FlashAir SD and FlashPap for data transfer.
OSCAR Team
ResMed AirCurve 10 VAuto, F&P Brevida.
FlashAir SD and FlashPap for data transfer.
- Dog Slobber
- Posts: 3961
- Joined: Thu Feb 15, 2018 2:05 pm
- Location: Ontario, Canada
Re: Abnormal data in venting and respiratory rate
I butchered my description. I meant to say 1.3.0.BlueDragon wrote: ↑Tue Jan 25, 2022 8:28 amIt was 1.3.0 that has that problem. 1.3.1 fixes it.Dog Slobber wrote: ↑Tue Jan 25, 2022 8:12 amI *believe* it's because of how OSCAR collects data. In 1.3.1, OSCAR immediately started collecting data when the device came on, the various metrics don't all start up at the same time. Therefore, almost always many of them will have a value of 0.
After installing 1.3.1, purge the current day and re-import. The problem should be solved. Let me know if it isn't.
Thanks for clarifying.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
Additional Comments: Min EPAP: 8.2, Max IPAP: 25, PS:4 |
- BatmanMatt
- Posts: 76
- Joined: Sat Dec 04, 2021 8:04 am
Re: Abnormal data in venting and respiratory rate
I uploaded this data today and updated Oscar yesterday. Should I still delete and re-import? Thanks for your work it’s benefited me greatly.BlueDragon wrote: ↑Tue Jan 25, 2022 8:28 amIt was 1.3.0 that has that problem. 1.3.1 fixes it.Dog Slobber wrote: ↑Tue Jan 25, 2022 8:12 amI *believe* it's because of how OSCAR collects data. In 1.3.1, OSCAR immediately started collecting data when the device came on, the various metrics don't all start up at the same time. Therefore, almost always many of them will have a value of 0.
After installing 1.3.1, purge the current day and re-import. The problem should be solved. Let me know if it isn't.
_________________
Machine: AirSense 11 Autoset |
Mask: Bleep DreamPort CPAP Mask Solution |
Additional Comments: Heated tubing |
Airsense 11 w/ heated tubing
Bleep Dreamport System!!!
Bleep Dreamport System!!!
- BlueDragon
- Posts: 541
- Joined: Sun May 27, 2018 10:20 am
- Location: Sonoran Desert
Re: Abnormal data in venting and respiratory rate
The easiest way is to just to rebuild the data. First, make a backup "just in case".
Then, in OSCAR, select Data > Rebuild CPAP Data > your machine
That should take care of the problem. Let me know if it doesn't.
Then, in OSCAR, select Data > Rebuild CPAP Data > your machine
That should take care of the problem. Let me know if it doesn't.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Brevida™ Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Dx Mar 2018 (AHI=24, RDI=54; AHI=73 supine). Started APAP June 2018, VAuto Aug 2020. |
OSCAR 1.5.1 is the latest release.
OSCAR Team
ResMed AirCurve 10 VAuto, F&P Brevida.
FlashAir SD and FlashPap for data transfer.
OSCAR Team
ResMed AirCurve 10 VAuto, F&P Brevida.
FlashAir SD and FlashPap for data transfer.