OSCAR v1.3.1 is released - January 23, 2022

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
BlueDragon
Posts: 521
Joined: Sun May 27, 2018 10:20 am
Location: Sonoran Desert

OSCAR v1.3.1 is released - January 23, 2022

Post by BlueDragon » Sun Jan 23, 2022 11:01 pm

OSCAR v1.3.1 is released

This is a minor release of OSCAR. We do recommend updating, especially if using ResMed or Fisher & Paykel CPAP machines where improvements have been made since the last release.

OSCAR, the Open Source CPAP Analysis Reporter
~ Official Download Page https://www.sleepfiles.com/OSCAR/  ~

Portions of OSCAR are © 2019-2022 by The OSCAR Team

Changes and fixes in OSCAR 1.3.1 include:
  • [new] Additional Philips Respironics devices tested and fully supported:
    • REMstar Plus (System One 60 Series) (261P) <i>provides only limited information</i>
    • REMstar Pro (System One 60 Series) (460PBT)
    • DreamStation CPAP Pro with Auto-Trial (401X150)
  • [new] Choose AS11 data instead of AS10 data if both are present on the SD card.
  • [new] Add support for new settings codes in recently manufactured 700X110 DreamStations.
  • [new] Add 95% flow limitation to Therapy Efficacy section on Statistics page.
  • [new] Add date range option to Statistics page.
  • [new] Improve appearance and operation of event type and graph comboboxes at bottom of Daily and Overview pages.
  • [new] Skip first 20 seconds of TiVol, RR, and MinVent in ResMed loader.
  • [new] Add ResMed 39423 Canadian Autoset to tested list.
  • [new] Show channel description when hovering over index name on Daily page.
  • [new] Add full support for Wellue CheckMe O2 Max.
  • [fix] Fix pressure values for AutoForHer mode on AS1x.
  • [fix] Fix missing oximetry and motion waveforms on Overview pages.
  • [fix] Fix rare problem of minimum pressure shown as zero on Overview and Statistics pages.
  • [fix] Update Statistics page after editing profile.
  • [fix] Correct selection of CPAP and AutoForHer modes for ResMed AS11 modes.
  • [fix] Skip first 10 seconds of pressure data for ResMed grapths and statistics.
  • [fix] Correct SleepStyle machines sometimes identified as Icon machines.
  • [fix] Improve event flag position in flow graph for DV6 machines.
  • [fix] --datadir option now allows fully qualified paths on Mac and Linux.
  • [fix] Correct value display on exact data points, and near session boundaries with drift.
  • [fix] Link to translations in Credits and Release Notes html is now translated to selected language.
  • [fix] Continue to import DreamStation 1 data even if there is (unsupported) DreamStation 2 data on the SD card.
  • [fix] Automatic Oximetry Cleanup no longer drops samples or supplemental oximeter channels such as movement.
  • [fix] Replace BRICK! message with better wording.
  • [fix] Add footer to first page of printed Statistics report.
  • [fix] Work around a Qt bug on Fedora 35 that caused hangs when selecting files.
  • [fix] Update copyright notices in html files.
For a list of all Release Notes in OSCAR click on Help / About OSCAR / Release Notes

Many of the changes that have occurred have resulted from input from you, the users of OSCAR. Keep them coming in.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: ResMed AirFit™ F30 Full Face CPAP Mask with Headgear
Additional Comments: Dx Mar 2018 (AHI=24, RDI=54; AHI=73 supine). Started APAP June 2018, VAuto Aug 2020.
OSCAR 1.3.1 is the latest release. ResMed AirSense 11, F&P SleepStyle, DeVilbiss BLUE, and Chromebooks now supported.
OSCAR Team
ResMed AirCurve 10 VAuto, ResMed AirFit F30 mask+EERS, F&P Brevida
FlashAir SD and FlashPap for data transfer.

southerndoc
Posts: 226
Joined: Sat Apr 23, 2011 9:32 pm
Location: Marietta, GA USA

Re: OSCAR v1.3.1 is released - January 23, 2022

Post by southerndoc » Mon Jan 24, 2022 12:21 am

Thanks for all that you do with it. :)

_________________
Machine: AirSense 11 Autoset
Mask: ResMed AirFit N30 Nasal CPAP Mask with Headgear
Additional Comments: OSCAR 1.3.1, SleepHQ

User avatar
Dog Slobber
Posts: 3155
Joined: Thu Feb 15, 2018 2:05 pm
Location: Ontario, Canada

Re: OSCAR v1.3.1 is released - January 23, 2022

Post by Dog Slobber » Mon Jan 24, 2022 8:18 am

Updated easily:
  • Made a backup of existing OSCAR_Data
  • Downloaded and executed 1.3.1
  • Imported last night's data
Everything worked perfectly (Mac 11.6).

Thank you!

User avatar
palerider
Posts: 30821
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: OSCAR v1.3.1 is released - January 23, 2022

Post by palerider » Mon Jan 24, 2022 11:07 am

Having been involved (in some fashion) with the development of sleepyhead from 0.98 and later (except for 1.1) and then Oscar, (though not much of late, I hope to change that), I have to say, from a somewhat insiders perspective that,

The OSCAR team is AMAZING. They've pulled together and work towards a common, and wholly different goal than the original SH developer, the goal of helping people., not personal aggrandizement, not making money, not puffing up their egos, they just want to make life a little better for people using cpaps.

I've watched the communications, the interpersonal workings and relationships, the way that they put their personal egos aside and work towards that common goal.

I have immense respect for everyone that's on the OSCAR team, they're (clearly, look at the release notes) making great progress at giving all of us a better tool to help improve our results.

Bravo folks, Bravo.

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR and come chat on IRC: #cpaptalk on irc.libera.chat

Accounts to put on the foe list: dataq1, gearchange, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They're often post misleading, timewasting stuff.

southerndoc
Posts: 226
Joined: Sat Apr 23, 2011 9:32 pm
Location: Marietta, GA USA

Re: OSCAR v1.3.1 is released - January 23, 2022

Post by southerndoc » Mon Jan 24, 2022 3:54 pm

palerider wrote:
Mon Jan 24, 2022 11:07 am
Having been involved (in some fashion) with the development of sleepyhead from 0.98 and later (except for 1.1) and then Oscar, (though not much of late, I hope to change that), I have to say, from a somewhat insiders perspective that,

The OSCAR team is AMAZING. They've pulled together and work towards a common, and wholly different goal than the original SH developer, the goal of helping people., not personal aggrandizement, not making money, not puffing up their egos, they just want to make life a little better for people using cpaps.

I've watched the communications, the interpersonal workings and relationships, the way that they put their personal egos aside and work towards that common goal.

I have immense respect for everyone that's on the OSCAR team, they're (clearly, look at the release notes) making great progress at giving all of us a better tool to help improve our results.

Bravo folks, Bravo.
Well said. They could easily charge for it, but the fact that they don't shows how committed they are for people improving their health. I have made adjustments to my own therapy and a friend's based on OSCAR. I cannot thank them enough.

_________________
Machine: AirSense 11 Autoset
Mask: ResMed AirFit N30 Nasal CPAP Mask with Headgear
Additional Comments: OSCAR 1.3.1, SleepHQ

User avatar
palerider
Posts: 30821
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: OSCAR v1.3.1 is released - January 23, 2022

Post by palerider » Mon Jan 24, 2022 7:32 pm

southerndoc wrote:
Mon Jan 24, 2022 3:54 pm
palerider wrote:
Mon Jan 24, 2022 11:07 am
Having been involved (in some fashion) with the development of sleepyhead from 0.98 and later (except for 1.1) and then Oscar, (though not much of late, I hope to change that), I have to say, from a somewhat insiders perspective that,

The OSCAR team is AMAZING. They've pulled together and work towards a common, and wholly different goal than the original SH developer, the goal of helping people., not personal aggrandizement, not making money, not puffing up their egos, they just want to make life a little better for people using cpaps.

I've watched the communications, the interpersonal workings and relationships, the way that they put their personal egos aside and work towards that common goal.

I have immense respect for everyone that's on the OSCAR team, they're (clearly, look at the release notes) making great progress at giving all of us a better tool to help improve our results.

Bravo folks, Bravo.
Well said. They could easily charge for it, but the fact that they don't shows how committed they are for people improving their health. I have made adjustments to my own therapy and a friend's based on OSCAR. I cannot thank them enough.
what I soft pedaled around is how incredibly different the environment is with the current group compared to what it was like during sleepyhead development. One was purely egocentric monomania (is that redundant?), the other is a spirit of calm cooperation, the OSCAR team is a breath of fresh air.

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR and come chat on IRC: #cpaptalk on irc.libera.chat

Accounts to put on the foe list: dataq1, gearchange, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They're often post misleading, timewasting stuff.

User avatar
zonker
Posts: 9039
Joined: Fri Jun 19, 2015 4:36 pm

Re: OSCAR v1.3.1 is released - January 23, 2022

Post by zonker » Mon Jan 24, 2022 7:49 pm

palerider wrote:
Mon Jan 24, 2022 7:32 pm

....the other is a spirit of calm cooperation, the OSCAR team is a breath of fresh air.
what i like about the oscar team is they are plainly open to feedback on the software. if it's not working for someone, they actually look at the users complaint instead of blowing them off.

not saying that was the case with sleepyhead, mind you. i'm just saying how dedicated the current chaps are to perfecting the software.
life is good, with a circle of friends.

User avatar
FatBruno
Posts: 54
Joined: Sun Jan 23, 2022 11:05 am

Re: OSCAR v1.3.1 is released - January 23, 2022

Post by FatBruno » Tue Jan 25, 2022 11:11 am

Is there a way to delete old data? I recently purchased a gently used BiPap machine, but when I imported my data yesterday into Oscar, I saw that the old data on there from 2018-2019. I didn't see a way to delete these old records though.
ResMed AirCurve 10 VAuto BiPAP :arrow: ResMed AirTouch F20

User avatar
Pugsy
Posts: 60822
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: OSCAR v1.3.1 is released - January 23, 2022

Post by Pugsy » Tue Jan 25, 2022 1:01 pm

FatBruno wrote:
Tue Jan 25, 2022 11:11 am
Is there a way to delete old data? I recently purchased a gently used BiPap machine, but when I imported my data yesterday into Oscar, I saw that the old data on there from 2018-2019. I didn't see a way to delete these old records though.
There is a way to remove the prior user's old data but until that old data is removed from the machine and the SD card...it will just keep coming back when OSCAR imports from the SD card.

You would need to erase all the old data from the machine and then from the SD card as well.
Mask: Bleep no headgear mask.. https://bleepsleep.com/
Machine: AirCurve 10 VAuto

I may have to RISE but I refuse to SHINE.

User avatar
BlueDragon
Posts: 521
Joined: Sun May 27, 2018 10:20 am
Location: Sonoran Desert

Re: OSCAR v1.3.1 is released - January 23, 2022

Post by BlueDragon » Tue Jan 25, 2022 1:06 pm

There's no direct way to delete old data. Easiest solution would be to create a new profile. In FIle/Preferences/Import, set the "do not import sessions older than" to when you started using your new machine.

If your new machine is by a different manufacturer than your previous machine, it should be in its own profile anyway.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: ResMed AirFit™ F30 Full Face CPAP Mask with Headgear
Additional Comments: Dx Mar 2018 (AHI=24, RDI=54; AHI=73 supine). Started APAP June 2018, VAuto Aug 2020.
OSCAR 1.3.1 is the latest release. ResMed AirSense 11, F&P SleepStyle, DeVilbiss BLUE, and Chromebooks now supported.
OSCAR Team
ResMed AirCurve 10 VAuto, ResMed AirFit F30 mask+EERS, F&P Brevida
FlashAir SD and FlashPap for data transfer.

User avatar
FatBruno
Posts: 54
Joined: Sun Jan 23, 2022 11:05 am

Re: OSCAR v1.3.1 is released - January 23, 2022

Post by FatBruno » Tue Jan 25, 2022 1:45 pm

This is my first machine, so there is no prior data.

I did decide today to ERASE the data but not for the reasons stated here. I could not change the TIME on the machine. It was three hours ahead. When I tried to change it, it did not allow me to do it without erasing the data.

So, I erased the SD card today, changed the date and time to the correct one and am starting over. Before I did that however, I did import the data into Oscar.

My new question is now: when I import new data, will it still keep the old data in Oscar even though I erased it on the SD card? I'm not sure if that makes sense or not.
ResMed AirCurve 10 VAuto BiPAP :arrow: ResMed AirTouch F20

User avatar
BlueDragon
Posts: 521
Joined: Sun May 27, 2018 10:20 am
Location: Sonoran Desert

Re: OSCAR v1.3.1 is released - January 23, 2022

Post by BlueDragon » Tue Jan 25, 2022 1:50 pm

That process will work fine.

Once data has been imported into OSCAR, it is stored in OSCAR's internal files and you are free to erase or use a different SD card.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: ResMed AirFit™ F30 Full Face CPAP Mask with Headgear
Additional Comments: Dx Mar 2018 (AHI=24, RDI=54; AHI=73 supine). Started APAP June 2018, VAuto Aug 2020.
OSCAR 1.3.1 is the latest release. ResMed AirSense 11, F&P SleepStyle, DeVilbiss BLUE, and Chromebooks now supported.
OSCAR Team
ResMed AirCurve 10 VAuto, ResMed AirFit F30 mask+EERS, F&P Brevida
FlashAir SD and FlashPap for data transfer.

User avatar
Pugsy
Posts: 60822
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: OSCAR v1.3.1 is released - January 23, 2022

Post by Pugsy » Tue Jan 25, 2022 1:54 pm

FatBruno wrote:
Tue Jan 25, 2022 1:45 pm
This is my first machine, so there is no prior data.

I did decide today to ERASE the data but not for the reasons stated here. I could not change the TIME on the machine. It was three hours ahead. When I tried to change it, it did not allow me to do it without erasing the data.

So, I erased the SD card today, changed the date and time to the correct one and am starting over. Before I did that however, I did import the data into Oscar.

My new question is now: when I import new data, will it still keep the old data in Oscar even though I erased it on the SD card? I'm not sure if that makes sense or not.
Create a new profile and import to it when you have new data from the now erased machine and SD card.
You can leave the old profile if you wish and ignore it or you could delete it if you wish.
The old profile can be found in your MyDocuments folder under Profiles if you wish to delete it.

Or you can purge the old data using the purge function available in OSCAR...where you can purge selected dates.

Me...I would just create a new profile.
Mask: Bleep no headgear mask.. https://bleepsleep.com/
Machine: AirCurve 10 VAuto

I may have to RISE but I refuse to SHINE.

User avatar
FatBruno
Posts: 54
Joined: Sun Jan 23, 2022 11:05 am

Re: OSCAR v1.3.1 is released - January 23, 2022

Post by FatBruno » Tue Jan 25, 2022 2:06 pm

Pugsy wrote:
Tue Jan 25, 2022 1:54 pm
Or you can purge the old data using the purge function available in OSCAR...where you can purge selected dates.

Me...I would just create a new profile.
I will probably just create a new profile like you said, but how do I "purge selected dates"?
ResMed AirCurve 10 VAuto BiPAP :arrow: ResMed AirTouch F20

User avatar
Pugsy
Posts: 60822
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: OSCAR v1.3.1 is released - January 23, 2022

Post by Pugsy » Tue Jan 25, 2022 2:14 pm

FatBruno wrote:
Tue Jan 25, 2022 2:06 pm
Pugsy wrote:
Tue Jan 25, 2022 1:54 pm
Or you can purge the old data using the purge function available in OSCAR...where you can purge selected dates.

Me...I would just create a new profile.
I will probably just create a new profile like you said, but how do I "purge selected dates"?
In Oscar look up at the top menu and click on "data"....then from the menu that opens click on "advanced" and the menu that then pops up shows the purge options.
Mask: Bleep no headgear mask.. https://bleepsleep.com/
Machine: AirCurve 10 VAuto

I may have to RISE but I refuse to SHINE.