AHI Target
Re: AHI Target
So..how long does it take you to fall asleep or go back to sleep after a wake up?
Like the 7:00 break in therapy where the machine was turned off briefly....why? And how long did it take you to get back to sleep?
Also....what position do you normally sleep in?
Any special reason you have limited the max pressure to 16 cm?
Like the 7:00 break in therapy where the machine was turned off briefly....why? And how long did it take you to get back to sleep?
Also....what position do you normally sleep in?
Any special reason you have limited the max pressure to 16 cm?
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
Re: AHI Target
Sometimes I get back to sleep quickly, depends on what is on my mind, body temperature, hungry etc. In this case, it was within minutes.
The 7 min is a bathroom visit.
Mostly, I am a back sleeper.
The DME has me a 16 when I complained that I had higher AHI when I raised the pressure Max above 16.
The 7 min is a bathroom visit.
Mostly, I am a back sleeper.
The DME has me a 16 when I complained that I had higher AHI when I raised the pressure Max above 16.
_________________
Machine: AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
ResMed AirSense 10 Autoset
P30i Mask
P30i Mask
Re: AHI Target
Please replace the completely useless AHI graph with the 'snore' graph.
right click on 'pressure' on the pressure graph and change the y axis to override, then 10 to 20.
Change your minimum pressure from 11 to 14, and max to 20.
right click on 'pressure' on the pressure graph and change the y axis to override, then 10 to 20.
Change your minimum pressure from 11 to 14, and max to 20.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: AHI Target
Done!
I shall report back in a week with a screenshot.
I shall report back in a week with a screenshot.
_________________
Machine: AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
ResMed AirSense 10 Autoset
P30i Mask
P30i Mask
Re: AHI Target
With that much change, let's see what tomorrow looks like.
Basically, with small changes, waiting a few days so you see an average is the thing to do, with larger changes, it's good to keep an eye on things more closely.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: AHI Target
OK, understood
_________________
Machine: AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
ResMed AirSense 10 Autoset
P30i Mask
P30i Mask
Re: AHI Target
Min / Max Pressures increased to
Here is last nights daily data. Consistent since the change on Sunday but not where I need to be.
_________________
Machine: AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
- Attachments
-
- screenshot-20211201-083215.png (278.73 KiB) Viewed 8167 times
ResMed AirSense 10 Autoset
P30i Mask
P30i Mask
Re: AHI Target
slight improvement, obviously. Try raising the min to 15, and let's see, with the pressure chart expanded a little, it's easier to see where the pressure is getting too low and going up as a result of breathing problems. I'm thinking you may need a min of 16, but let's see what 15 does for a couple days
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: AHI Target
Mask leaks likely caused by headgear straps slipping up/off.
I do not think my last pressure change was done correctly. Indicates 14/20. Just revised it to 15/20
I do not think my last pressure change was done correctly. Indicates 14/20. Just revised it to 15/20
_________________
Machine: AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
ResMed AirSense 10 Autoset
P30i Mask
P30i Mask
Re: AHI Target
Let's try 15 and see if that'll help.
The first part of the night was good, if you were actually asleep.
The first part of the night was good, if you were actually asleep.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
- Miss Emerita
- Posts: 3416
- Joined: Sun Nov 04, 2018 8:07 pm
Re: AHI Target
Palerider, I wonder whether the OP would benefit from introducing some EPR to help with flow limitations (and maybe hypopneas). Could the little boost supporting inhalation make a difference, do you think?
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Bleep DreamPort CPAP Mask Solution |
Oscar software is available at https://www.sleepfiles.com/OSCAR/
Re: AHI Target
That was going to be my next suggestion, actually. but needed to get the base pressure up in any event.Miss Emerita wrote: ↑Fri Dec 03, 2021 6:58 pmPalerider, I wonder whether the OP would benefit from introducing some EPR to help with flow limitations (and maybe hypopneas). Could the little boost supporting inhalation make a difference, do you think?
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: AHI Target
SleepDeep, I have a ResMed AirSense 10 and I don't receive the data in my reports that you show in your post. I'm wondering how I can get a more detailed report. I just get usage hours, leaks L/min, average AHI. Thanks in advance.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Started with an Airfit F20 Full Face Mask. Found it uncomfortable. |
Re: AHI Target
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
people say i'm self absorbed.
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
Re: AHI Target
Sacktime
My procedure is to
My procedure is to
- Remove the data card from the machine
set the card to locked
insert the card into the computer
open Oscar (there are links to download Oscar in the forums)
Click your profile and import the data
Click the daily or overview tab
the data you have selected in the preferences will be shown
There are some guidelines as to which data to select and display
You can take a screenshot from within Oscar, then attach it in a forum post/list]
That should work for you.
_________________
Machine: AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
ResMed AirSense 10 Autoset
P30i Mask
P30i Mask