egzbuen wrote:
Hi den.
I have the hard copy of that manual. It came with my unit. Sadly, it doesn't say anything about how to access the clinician setup. It's simply the users manual if I am not mistaken. Thus, had to do a quick research. But, no worries.
Anyway, in case anyone would need it, it's simply:
1. Use menu button to go to the setting you want to change
2. Press the up and down button simultaneously and do not let go
3. Press the menu button until the letters and/or numbers on the screen blink
4. Now use the arrows to adjust
5. Click meno button again once done
Sent from heaven
Page 7
START/STANDBY
To start the treatment, simply press the "START/STANDBY" button. To stop the
treatment, press the "START/STANDBY" button again. The display will switch
between [STANDBY] and Therapy Pressure [ XX.X cmH2O] in cmH2O unit.
MENU
Press the "MENU" button to enter the setting mode when device is in standby mode.
The adjustment setting includes mode selection, ramp time selection, ramp starting
pressure, therapy pressure adjustment, initial pressure adjustment, maximum pressure
adjustment, minimum pressure adjustment, alarm ON/OFF, clock alarm and clock
setting, compliance meter, and total operating meter. When each setting's value has
been changed, press "MENU" for confirmation and press "MENU" again for next
setting selection. Please refer to 4.2 Function Description section for detailed
information.
UP
Press the "UP" button to increase the value.
DOWN
Press the "DOWN" button to decrease the value.
4.2 Function Description
Getting Started – First time use.
For first-time use, follow the steps below:
1. Make sure that your physician or care provider has initialized and configured the appropriate
treatment values into the unit.
2. Make sure that your package contains a face or nasal mask with headgear. If not, your
physician or care provider can recommend the type of mask and headgear you must obtain
3. Attach tubing and mask (see Setup section).
4. Attach power cord to the unit and an electrical outlet (see Setup section). Unit will
power-on automatically.
5. Use the “MENU” button to set the Current Time, Ramp Up Time, and Ramp Starting
Pressure, (see “MENU” Button Section for description of these options).
Note that these values may have been already set by your physician or care provider.
6. Press the “START/STANDBY” button – Airflow to the mask will begin.
7. You can now place the Headgear and Mask over your head and face and begin treatment
4.3 Menu Button - Option Descriptions
The following items describe the options presented to you after you press the “MENU” button on
the control panel.
(1) Ramp Time (only CPAP mode)
Ramp time function allows the user to fall asleep with a lower, more comfortable pressure
and helps them gradually become accustomed to increasing treatment pressure. The
second selection of pressing "MENU" is [Ramp XX MIN]. When the "MENU" setting is in
[Ramp XX MIN] mode, press "UP" or "DOWN" button to set the preferred ramp time and
press "MENU" for confirmation. There are 10 adjustable levels, 0, 5, 10, 15, 20, 25, 30, 35,
40 and 45 minutes.
(2) Ramp Starting Pressure (only CPAP mode)
Press "MENU" button to select [Ramp P XX.X] menu, press "UP" or "DOWN" button to
set the preferred ramp starting pressure and press "MENU" for confirmation. The ramp
starting pressure can be changed from 3 cmH2O to “Therapy Pressure – 1” cmH2O. For
example, if your therapy pressure is 10 cmH2O, the maximum ramp starting pressure you
can select is 9 cmH2O.
(3) Therapy Pressure (only CPAP mode)
Press "MENU" button to select [P XX.XcmH2O] menu, you can view the current pressure
setting displayed in cmH2O unit. Therapy pressure is adjustable only by the provider, a
respiratory therapist or physician.
NOTE: The therapy pressure is to only be prescribed by a physician.
(4) Initial Pressure (only APAP mode)
Press "MENU" button to select [Init. XX.XcmH2O] menu, you can view the current
pressure setting displayed in cmH2O unit. Initial pressure is adjustable only by the provider,
a respiratory therapist or physician.
NOTE: The initial pressure is to only be prescribed by a physician.
(5) Maximum Pressure (only APAP mode)
Press "MENU" button to select [Max. XX.XcmH2O] menu, you can view the current
pressure setting displayed in cmH2O unit. Maximum pressure is adjustable only by the
provider, a respiratory therapist or physician.
NOTE: The maximum pressure is to only be prescribed by a physician.
(6) Minimum Pressure (only APAP mode)
Press "MENU" button to select [Min. XX.XcmH2O] menu, you can view the current
pressure setting displayed in cmH2O unit. Minimum pressure is adjustable only by the
provider, a respiratory therapist or physician.
NOTE: The minimum pressure is to only be prescribed by a physician.
(7) PVA (Pressure Variation Algorithm)
Press "MENU" button to select [c on/off] menu, you can view if the PVA function is
enabled by the provider, a respiratory therapist or physician. The PVA function delivers
pressure relief upon exhalation to improve comfort. If the PVA function is enabled, press
"UP" or "DOWN" button to adjust the comfort level. There are 3 adjustable levels of
pressure relief that you feel while exhalation. Level 1 provides small pressure variation; and
level 3 provides higher pressure variation.
(8) Low Pressure Auto Off (only CPAP mode)
Press "MENU" button to select [LOW P on/off] menu, you can view if the Low Pressure
Auto Off setting is enabled and the device will be automatically turned off while detecting a
large leak for 3 minutes. This setting is adjustable only by the provider, a respiratory
therapist or physician.
(9) Compliance Meter
Press "MENU" button to select [CM XXXX.X hr] menu, the compliance meter records the
total therapy hours for the device. The compliance meter should be re-set only by the
provider, a respiratory therapist or by a physician.
(10) Alarm
Press "MENU" button to select [Alarm on/off] menu, press "UP" or "DOWN" button to set
the alarm on or off. When alarm is turned on, the audible alarm will activate with warning
messages showed on the LCD display. Set alarm off for mute the audible alarm.
(11) Clock Alarm
Press "MENU" button to select [Clock Alarm on/off] menu, press "UP" or "DOWN" button
to set the clock alarm on or off. When clock alarm is set on, the display will show the time on
the left side. Press "UP" or "DOWN" button to set the time to wake you up. Once the clock
alarm is activated, press the start/standby button to mute the audible alarm.
(12) Clock
Press "MENU" button to select [Clock XX:XX] menu, press "UP" or "DOWN" button to set
the current time.
(13) Turn off the Device
Remove the power cord from the electrical outlet, and disconnect power cord from the
power socket on the back of device.
NOTE: Once the setting is confirmed, press “MENU” button. Otherwise, the device will
automatically go back to standby without saving the modification if no action is
taken in 20 seconds.
(14) Event Indication
While the device is on standby mode, press UP" and "DOWN" button at the same time to
see the latest data of Apnea Index (AI), Hypopnea Index (HI), Snoring Index (SI) and Flow
Limitation Index (FI) on the display. Press "MENU" button to show each index in sequence.
To go back to standby mode, press "START/STANDBY" button.
NOTE: Once the device is re-started, all the indexes will be re-calculated. Index data
can only be viewed by respiratory therapists or physicians by using Easy
Compliance playback software.
.
Looks like the same information you have typed in your post.
Den
.