M-Series CPAP Programming

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
rkknz
Posts: 3
Joined: Wed Nov 18, 2009 2:35 pm

M-Series CPAP Programming

Post by rkknz » Wed Nov 25, 2009 1:10 pm

Can anyone out there tell me how to program (setup) a Respironic's M-Series machine? I want to tweak the present settings and don't know to access the setup code. I programmed my former RemStar w/C-Flex for years and wish to continue with the recently aquired M-Series machine. Please someone help me. I'm using an M-Series Plus with A-Flex machine w/heated humidifier and A Resmed Swift LT mask.

RKK
Top
User avatar
Watts
Posts: 31
Joined: Thu Jul 16, 2009 8:45 am
Location: Elmira, NY

Re: M-Series CPAP Programming

Post by Watts » Wed Nov 25, 2009 1:19 pm

I don't have my machine handy but you hold down the upper right and left button simultaineously while plugging in the power cord. Wait till you hear two beeps and your in.

_________________
Mask: Forma Full Face CPAP Mask with Headgear
Additional Comments: Software: Sleepyhead
Top
User avatar
DoriC
Posts: 5214
Joined: Sat Sep 13, 2008 9:28 pm
Location: NJ

Re: M-Series CPAP Programming

Post by DoriC » Wed Nov 25, 2009 4:28 pm

I don't think the Plus comes with AFlex, it's only offered with an auto.

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Additional Comments: 14/8.4,PS=4, UMFF, 02@2L,
"Do or Do Not-There Is No Try"-"Yoda"
"We are what we repeatedly do,so excellence
is not an act but a habit"-"Aristotle"
DEAR HUBBY BEGAN CPAP 9/2/08
Top
flylow
Posts: 136
Joined: Tue Jul 24, 2007 7:15 pm
Location: New Jersey

Re: M-Series CPAP Programming

Post by flylow » Wed Nov 25, 2009 4:52 pm

the plus does not have detailed data. What is your basis for tweaking without that information. Kind of like flying in the clouds with no gyro instruments.

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Additional Comments: 10 to 14 cm (still figuring this out), epr 2
Top
JZ
Posts: 360
Joined: Mon Feb 05, 2007 9:25 pm
Location: Texas

Re: M-Series CPAP Programming

Post by JZ » Wed Nov 25, 2009 11:20 pm

Web site with clinician manual information:

http://www.apneaboard.com/CPAP%20Adjustment.htm
Top
rkknz
Posts: 3
Joined: Wed Nov 18, 2009 2:35 pm

Re: M-Series CPAP Programming

Post by rkknz » Thu Nov 26, 2009 8:31 am

flylow wrote:the plus does not have detailed data. What is your basis for tweaking without that information. Kind of like flying in the clouds with no gyro instruments.
My error, I have a Remstar Auto M with A-Flex and thank you for your interest and comment. rkk
Top
rkknz
Posts: 3
Joined: Wed Nov 18, 2009 2:35 pm

Re: M-Series CPAP Programming

Post by rkknz » Thu Nov 26, 2009 9:40 am

rkknz wrote:Can anyone out there tell me how to program (setup) a Respironic's M-Series machine? I want to tweak the present settings and don't know to access the setup code. I programmed my former RemStar w/C-Flex for years and wish to continue with the recently aquired M-Series machine. Please someone help me. I'm using an M-Series Plus with A-Flex machine w/heated humidifier and A Resmed Swift LT mask.

RKK
My machine is a Remstar Auto M with A-Flex, I listed it as as an M Series Plus by mistake. Thank you all for your help, it was greatly appreciated. rkk
Top


Return to “CPAP and Sleep Apnea Message Board”