N95 filter for Remed Airsense 10

CharlieWW · Post by **CharlieWW** » Sat Aug 10, 2024 8:45 pm

I sometimes have allergy to pollen and needed a good filter. So I designed and 3D printed an adapter to take 3M respirator filters and cartridges and a hose adaptor that allows me to use a spare CPAP hose to connects to my Resmed Airsense 10 inlet.

It has standard 3M respirator filter bayonet connectors on each side so can take any 3M cartridges or filters. I'm just using 3M N95 filters (actually the Australian equivalent p2/p3) for pollen and mold spore protection. I see many people on forums struggle with wildfire smoke and CPAP, using activated charcoal cartridges would solve that. I have fairly low pressures (8cmh2o) and there is very little resistance through the filters and its not putting any load on the fan motor. I change the filters regularly to make sure there is always good airflow.

I've put the 3D model up here if anyone is interested in making there own. https://makerworld.com/en/models/582256

prodigyplace · Post by **prodigyplace** » Sun Aug 11, 2024 4:31 am

I notice your maker page offers making adapters for other CPAP. What information do you need for the AirSense 11?

I personally am not interested in this but I have both 10 & 11 and my son has a 3D printing hobby,

Conrad · Post by **Conrad** » Sun Aug 11, 2024 7:19 am

Great idea CharlieWW! Well done.

CharlieWW · Post by **CharlieWW** » Sun Aug 11, 2024 1:17 pm

prodigyplace wrote: ↑
Sun Aug 11, 2024 4:31 am
I notice your maker page offers making adapters for other CPAP. What information do you need for the AirSense 11?

I'd need the shape and dimensions of the air inlet port. I imagine the Airsense 11 is the same as 10 (round 14mm hole)?

prodigyplace · Post by **prodigyplace** » Mon Aug 12, 2024 4:39 am

CharlieWW wrote: ↑
Sun Aug 11, 2024 1:17 pm

prodigyplace wrote: ↑
Sun Aug 11, 2024 4:31 am
I notice your maker page offers making adapters for other CPAP. What information do you need for the AirSense 11?
I'd need the shape and dimensions of the air inlet port. I imagine the Airsense 11 is the same as 10 (round 14mm hole)?

I will try & get my son to measure accurately. What do you mean about the hole? I am not following your thought.

Dog Slobber · Post by **Dog Slobber** » Mon Aug 12, 2024 5:29 am

prodigyplace wrote: ↑
Mon Aug 12, 2024 4:39 am

I will try & get my son to measure accurately. What do you mean about the hole? I am not following your thought.

This filter relaces the square filter on the Air 10. You remove the rectangle filter currently in place and then place the hose adapter into the round inlet hole accessible behind the filter door.

On an Air 11, similar system, but the hole may not be the same size.

: Air11_inlet.jpg (89.43 KiB) Viewed 15721 times

CharlieWW · Post by **CharlieWW** » Mon Aug 12, 2024 12:34 pm

Looks like the hole on the Airsense 11 is a little obscured by the filter door. I think you'd have to unclip the door at the hinges.

prodigyplace · Post by **prodigyplace** » Tue Aug 13, 2024 4:36 am

Dog Slobber wrote: ↑
Mon Aug 12, 2024 5:29 am

prodigyplace wrote: ↑
Mon Aug 12, 2024 4:39 am

I will try & get my son to measure accurately. What do you mean about the hole? I am not following your thought.
This filter relaces the square filter on the Air 10. You remove the rectangle filter currently in place and then place the hose adapter into the round inlet hole accessible behind the filter door.

On an Air 11, similar system, but the hole may not be the same size.

Air11_inlet.jpg

Ok, thanks.

I just looked at my AirSense 10 and seethe round inlet hole. As you started, the aursense 11 hole is oval, partially covered by the open door.

My son was busy yesterday. He may have some design ideas to work around this, if people are interested. Personally, this does not interest me, but I saw I have the resources that could help others who may be interested.

CharlieWW · Post by **CharlieWW** » Tue Aug 13, 2024 12:02 pm

If anyone is able to accurately measure the height and width of the oval I can make an adapter.

amenite · Post by **amenite** » Tue Aug 13, 2024 3:40 pm

CharlieWW wrote: ↑
Tue Aug 13, 2024 12:02 pm
If anyone is able to accurately measure the height and width of the oval I can make an adapter.

I don't have one to measure but it seems like you should be able to make one slightly cone shaped, or graduated diameters, so there would be one adapter to rule them all? Just a thought, still need a measurement I guess

prodigyplace · Post by **prodigyplace** » Wed Aug 14, 2024 3:46 am

Sorry, people.

I checked with my son and he is unwilling to help.

Likely intentionally, half of the oval is blocked by the curved filter door. My only idea would be something to clip into the curved door but the curve and sealing would be issues.

CharlieWW · Post by **CharlieWW** » Wed Aug 14, 2024 1:36 pm

No worries. I think you'd have to remove to door to access the inlet. It does just unclip but there is a small risk of breaking the plastic so I wouldn't do it unless your really keen on hooking up my n95 filter. I found some good pictures on line so might have a crack at a tapered oval that should work (with the door removed).

prodigyplace · Post by **prodigyplace** » Fri Aug 16, 2024 4:35 am

CharlieWW wrote: ↑
Wed Aug 14, 2024 1:36 pm
No worries. I think you'd have to remove to door to access the inlet. It does just unclip but there is a small risk of breaking the plastic so I wouldn't do it unless your really keen on hooking up my n95 filter. I found some good pictures on line so might have a crack at a tapered oval that should work (with the door removed).

Without trying, I have broken the door on my AirSense 10 a couple of times. I have not looked that closely at my Airsense 11 but I really doubt they improved that.

NYcpap · Post by **NYcpap** » Fri Jan 10, 2025 12:11 pm

This looks like a nice adapter. Can you make one and what would you charge for it?
https://www.printables.com/model/274981 ... dapt/files

CharlieWW · Post by **CharlieWW** » Fri Jan 10, 2025 1:14 pm

I did see that one after I posted my version. Looks tidy but only uses a single 3M filter. The 3M respirators are designed to use 2 so as not to restrict air flow, which would be particularly important with CPAP. Probably not a big issue with N95 but would likely be a problem if using activated charcoal filters for wildfire smoke.

You can get them printed using a service like PCBway if you really want one.

N95 filter for Remed Airsense 10

N95 filter for Remed Airsense 10

Re: N95 filter for Remed Airsense 10

Re: N95 filter for Remed Airsense 10

Re: N95 filter for Remed Airsense 10

Re: N95 filter for Remed Airsense 10

Re: N95 filter for Remed Airsense 10

Re: N95 filter for Remed Airsense 10

Re: N95 filter for Remed Airsense 10

Re: N95 filter for Remed Airsense 10

Re: N95 filter for Remed Airsense 10

Re: N95 filter for Remed Airsense 10

Re: N95 filter for Remed Airsense 10

Re: N95 filter for Remed Airsense 10

Re: N95 filter for Remed Airsense 10

Re: N95 filter for Remed Airsense 10

Machine	Mask