Hi,
I've been using my ResMed AirSense 10 AutoSet CPAP machine since March and when I look at the reports in Oscar I don't see much information.
For example, in the Overview tab, the pressure is the exact same for all day's and if I go to the "Overview" tab I only have data for the AHI, Usage, Session Times and pressure charts. "Total Time in Apnea", "Leak Rate", "Minute Vent." "Respiratory Rate" and "Tidal Volume" are all blank. See screen shots attached.
I'm just wondering how to fix this.
Resmed AirSense 10 Reports
5 posts
• Page 1 of 1
Resmed AirSense 10 Reports
- Attachments
-
- Overview Tab.JPG (379.93 KiB) Viewed 997 times
-
- Oscar Daily.JPG (149.36 KiB) Viewed 997 times
Re: Resmed AirSense 10 Reports
Is the SD card inserted correctly into the machine all night long while the machine is in use?
If it isn't in the machine you won't get those graphs because that detailed data has to go directly to the SD card when it is generated because nothing but summary data is stored on the machine.
If it isn't in the machine you won't get those graphs because that detailed data has to go directly to the SD card when it is generated because nothing but summary data is stored on the machine.
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
Re: Resmed AirSense 10 Reports
I was having a problem with my card so I had to format it, when I put it back in the machine re-copied the data to it then I took it out and imported it into Oscar and when that's when I noticed the issue. I don't check that very often but I've been having some issues with feeling tired and wanted to see what kind of info was in there.
I wasn't home last night so I couldn't use my machine but will be using it tonight so tomorrow morning I'll see what data is showing and let you know.
Which brings me to why I wanted to check the data. I've been feeling weird, I'm finding it hard to concentrate and I was not able to use my machine for while because I got sick and noticed that my focusing was getting better and when I started using my machine again I notice the issue with focusing was coming back.
Thank you.
I wasn't home last night so I couldn't use my machine but will be using it tonight so tomorrow morning I'll see what data is showing and let you know.
Which brings me to why I wanted to check the data. I've been feeling weird, I'm finding it hard to concentrate and I was not able to use my machine for while because I got sick and noticed that my focusing was getting better and when I started using my machine again I notice the issue with focusing was coming back.
Thank you.
Re: Resmed AirSense 10 Reports
Hi,
This time I have data, I've attached the screen from last night along with a screen shot of the stats. If someone could let me know if there's problem somewhere.
Thank you.
This time I have data, I've attached the screen from last night along with a screen shot of the stats. If someone could let me know if there's problem somewhere.
Thank you.
- Attachments
-
- cpap stats.JPG (193.93 KiB) Viewed 871 times
-
- Daily.JPG (341.43 KiB) Viewed 871 times
Re: Resmed AirSense 10 Reports
Yup, the left panel's way too wide and your pressures are way to low, a min of 10 and max of 20 would be better.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
5 posts
• Page 1 of 1