Bleep Eclipse Noise and Leaking

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
GrettyKaye
Posts: 1
Joined: Sat Sep 04, 2021 8:15 am

Bleep Eclipse Noise and Leaking

Post by GrettyKaye » Sat Mar 25, 2023 6:16 pm

I have been happily using the original Bleep Dreamport system for a couple years. I love it, although connecting the interface to the dreamports is sometimes a little challenging. It’s hard to get my fingers in there to get the connection at the right angle and the ridges on the dreamports kind of dig into my fingers as I’m trying to get it connected. Not a big deal, and I am really generally thrilled with the product.

I pre-ordered the eclipse and halos last summer.m and received them sometime in early January. I love how easy is it to connect the interface to the halos. I do trim the adhesive before attaching the second halo so it doesn’t overlap the metal ring. I feel like it connects tightly and properly, easily clicks into place. However, I’ve had problems with noise when inhaling to the point of not being able to fall asleep. I thought the noise had to do with the vent diffuser not fitting as snuggly on the eclipse interface as it did with the original interface. I emailed Stuart about it and he suggested sticking an extra filer in there. I really tried to make that work, and even used some breathable medical tape on the outer edges to hold the extra filter in place. I was switching back and forth between the eclipse and the original but can only sleep through the night with the original. The last two times I tried the eclipse, it was leaking terribly, blowing cold air in my face and I couldn’t figure out the source of the problem. I’ve stopped trying.

I’d like to find a way to make it work. I read some other threads where people were talking about issues with the seal between the adhesive and the metal ring, and I don’t really know if that is causing my problem. Someone suggested putting clear tape over the halos and cutting a hole in the middle. I also saw or somebody was talking about some solution using a rolling pin. I’m sorry, but that’s just too much effort to make this work.

That said, I would like these to work for me. I mean I paid for this and I have several months worth of halos. Mostly I am worried that they will stop production on the original version and then I’ll be stuck. Does anyone have any ideas how I can fix these problems? Between the noise in the leaking, I just can’t deal with it.

User avatar
CPAP-A-MUST
Posts: 47
Joined: Tue Dec 13, 2022 11:35 am

Re: Bleep Eclipse Noise and Leaking

Post by CPAP-A-MUST » Sun Mar 26, 2023 10:08 am

I stopped used the Eclipse because of problems similar to your own and went back to the N30i. I trialed the Eclipse this past summer and fell in love with it and experienced no problem whatsoever. When I received my order at the end of December is when problems started occurring where the Eclipse would pull away from the Halos. After a few restless night I stopped and went back to my tried and true friend…the N30i. I’m sitting on boxes of the product as well.

I believe something happened in the production process from the time I used the trial and December. Not sure what went wonky…possibly supply chain issues. That being said, Stuart (Mr. Bleep) is a very open and honest guy. I believe he will ultimately make things right.
Machine: ResMed AS10 for Her w/Humdifier & ClimateLine Hose
Settings: Fixed at 8 cm H2O, EPR 1
Mask: ResMed N30i
Other: Kinesiology Tape

“Gratitude and attitude are choices, not challenges”

User avatar
Miss Emerita
Posts: 3416
Joined: Sun Nov 04, 2018 8:07 pm

Re: Bleep Eclipse Noise and Leaking

Post by Miss Emerita » Sun Mar 26, 2023 11:40 am

I love the original Bleep but had to veto the Eclipse. The noise problem was the main issue for me, followed by the need to trim the halo units and the sensation of having my nose wrenched around more than it is with the original Bleep.

Not a constructive response to your question, I know! In a much longer thread about the Eclipse, I can see that noise is a problem for some of us and not for others. I wish I knew what accounts for those differences.

Like you, I'm worried we'll eventually lose the original Bleep, but I have my fingers crossed they'll keep making them.
Oscar software is available at https://www.sleepfiles.com/OSCAR/

ResistX
Posts: 2
Joined: Wed Aug 09, 2023 7:12 pm

Re: Bleep Eclipse Noise and Leaking

Post by ResistX » Wed Aug 09, 2023 7:34 pm

I tried the Eclipse for 3 nights the noise was too much. I tried putting another filter between the white and black material but that really hasn't helped much. I really don't understand why this thing is so noisy when inhaling. I think they need to redesign it. My P10 nasal pillows didn't make this much noise.

User avatar
chunkyfrog
Posts: 34377
Joined: Mon Jul 12, 2010 5:10 pm
Location: Nebraska--I am sworn to keep the secret of this paradise.

Re: Bleep Eclipse Noise and Leaking

Post by chunkyfrog » Wed Aug 09, 2023 10:49 pm

Sadly, it is true that no mask is compatible with every single face.
But Bleep does come closer than many others.

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Additional Comments: Airsense 10 Autoset for Her

Tomloughlin
Posts: 1
Joined: Sat Dec 16, 2023 1:50 pm

Re: Bleep Eclipse Noise and Leaking

Post by Tomloughlin » Sat Dec 16, 2023 2:13 pm

I have had the same problem. I was getting A continuous rush of air from the mask area where the posts with the magnets on them meet the main body of the mask. I filled this area with a thin layer of clear Gorilla glue. I was still able to connect the mask to the halos. This solved the problem. The posts may not have as much latitude as before, but still enough to connect without leaking.
I hope that this was helpfull.o