Well I have been keeping my word and using my ResMed AirCurve for almost a month now. But on occasions I am getting moisture in the mask. I have the incoming air set at 61 degrease. The humidity is set a position number 4. Also before sleeping I need to use a nasal decongestant. Using it allows me uninterrupted slumber. Could this cause any respiratory concerns? Thanks, Ken
Update, Oscar says my AHI was 5.99
However the AHI on the unit says 2.6
Moisture in the Mask
Moisture in the Mask
Last edited by KENSKIP1 on Mon Jun 27, 2022 11:54 am, edited 2 times in total.
Re: Moisture in the Mask
Water in the mask or hose really isn't of the amount that can harm someone physically but it can sure be annoying if it wakes the person up or wakes up the bed partner repeatedly.
You can read about your options here...posts number 2 and 3.
http://www.cpaptalk.com/viewtopic/t9403 ... -road.html
Since you are using a heated hose....add some heat to the air if the water in the mask or hose is too annoying.
Condensation in the mask or hose is simply Physics in action and you have to deal with it by employing physics in some form.
You can read about your options here...posts number 2 and 3.
http://www.cpaptalk.com/viewtopic/t9403 ... -road.html
Since you are using a heated hose....add some heat to the air if the water in the mask or hose is too annoying.
Condensation in the mask or hose is simply Physics in action and you have to deal with it by employing physics in some form.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.