AHI Target
Re: AHI Target
Thanks Zonker, but I am getting the message “OSCAR” cannot be opened because the developer cannot be verified. macOS cannot verify that this app is free from malware. I ran it through Avast, but still no luck.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Started with an Airfit F20 Full Face Mask. Found it uncomfortable. |
Re: AHI Target
Two days at 15/20.
Some side effects of increased mask leak, dry mouth and water tub empty in the morning.
As well, concern into AHI numbers. Oscar says Resmed data does not include sessions yet I get sessions. Most recent data has AHI of 5.47 and 4.7 in the two sessions for the night. Machine is reporting 6.7. I don't see a way to combine the sessions. It is odd how those two sessions can combine into 6.7. Having sessions makes your reviews harder IMO.
FYI, there has been some discussion on my EPR, which is at 3.
Results are not showing any significant improvement over the original pressure settings we started with a few weeks ago.
Some side effects of increased mask leak, dry mouth and water tub empty in the morning.
As well, concern into AHI numbers. Oscar says Resmed data does not include sessions yet I get sessions. Most recent data has AHI of 5.47 and 4.7 in the two sessions for the night. Machine is reporting 6.7. I don't see a way to combine the sessions. It is odd how those two sessions can combine into 6.7. Having sessions makes your reviews harder IMO.
FYI, there has been some discussion on my EPR, which is at 3.
Results are not showing any significant improvement over the original pressure settings we started with a few weeks ago.
_________________
Machine: AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
- Attachments
-
- screenshot-20211205-105909.png (272.92 KiB) Viewed 8556 times
ResMed AirSense 10 Autoset
P30i Mask
P30i Mask
Re: AHI Target
Please start your own thread.
Tell your OS to let you install the program, there's nothing wrong with it, it's just macOS trying to keep you from doing what you want to do.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
- Dog Slobber
- Posts: 3960
- Joined: Thu Feb 15, 2018 2:05 pm
- Location: Ontario, Canada
Re: AHI Target
Ctrl-click the OSCAR installer, MacOS will then present an option to open it.
So long as you downloaded OSCAR from it's proper download location, you're good.
https://www.sleepfiles.com/OSCAR/
The error message doesn't mean (or even suggest) OSCAR contains any malware, it means (because the app is unsigned) the developer is unknown.
I have no idea who you are, therefore I can't verify you are not an axe-murderer.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
Additional Comments: Min EPAP: 8.2, Max IPAP: 25, PS:4 |
Re: AHI Target
how is this even fair for axe murderers with sleep apnea?Dog Slobber wrote: ↑Sun Dec 05, 2021 4:24 pm
I have no idea who you are, therefore I can't verify you are not an axe-murderer.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
people say i'm self absorbed.
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
Re: AHI Target
Thanks Dog Slobber. I have downloaded and installed Oscar. Re importing data, is this only via SD card. I am using a ResMed machine, so I get pdf reports which I assume are not a format that Oscar can work with.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Started with an Airfit F20 Full Face Mask. Found it uncomfortable. |
Re: AHI Target
probably be a good time for you to start your own thread.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
people say i'm self absorbed.
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
- Miss Emerita
- Posts: 3443
- Joined: Sun Nov 04, 2018 8:07 pm
Re: AHI Target
Sleepdeep, I think it’s time for some EPR. I’d be inclined to leave your minimum at 15 and introduce EPR at 2, if Palerider concurs. My guess is that the EPR will do a fair amount of work for you in reducing the number of hypopneas you’re having. So even though your EPAP will be down by 2, you might still see improvement. An experiment worth trying?
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Bleep DreamPort CPAP Mask Solution |
Oscar software is available at https://www.sleepfiles.com/OSCAR/
Re: AHI Target
Thank you. I shall adjust and report back in a few days.
_________________
Machine: AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
ResMed AirSense 10 Autoset
P30i Mask
P30i Mask
Re: AHI Target
Interesting to note I had Ramp off and EPR to Ramp Only. So I am assuming there was no EPR previously as those two kind of cancel each other.
Now adjusted to Ramp off and EPR of 2 to Full Time.
Now adjusted to Ramp off and EPR of 2 to Full Time.
_________________
Machine: AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
ResMed AirSense 10 Autoset
P30i Mask
P30i Mask
Re: AHI Target
Pressure unchanged for 3 days @ 15 / 18 and the EPR setting adjusted and at 2. A big reduction to the number of events, especially Hypopnea.
I don't know what to think about the Oscar AHI numbers being 0.90 and 0.91 for the two sessions. The machine is reporting AHI of 5.9 for this night. How can there be such a discrepancy? Which one should I be guided by?
I don't know what to think about the Oscar AHI numbers being 0.90 and 0.91 for the two sessions. The machine is reporting AHI of 5.9 for this night. How can there be such a discrepancy? Which one should I be guided by?
_________________
Machine: AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
- Attachments
-
- screenshot-20211209-111717.png (261.32 KiB) Viewed 8404 times
ResMed AirSense 10 Autoset
P30i Mask
P30i Mask
Re: AHI Target
What does the machine report for hours of use for this/last night?
You are talking about the sleep report from last night and not the numbers you can get if you go into the setup menu area to see the results????
The numbers shown when you go into the setup menu area are a 30 day average unless you set the reporting parameters for something less.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
Re: AHI Target
Trust Oscar, you can zoom in and look at the breathing if you want.SleepDeep wrote: ↑Thu Dec 09, 2021 1:30 pmPressure unchanged for 3 days @ 15 / 18 and the EPR setting adjusted and at 2. A big reduction to the number of events, especially Hypopnea.
I don't know what to think about the Oscar AHI numbers being 0.90 and 0.91 for the two sessions. The machine is reporting AHI of 5.9 for this night. How can there be such a discrepancy? Which one should I be guided by?
As Pugsy said, check to make sure that the machine isn't reporting it's default 30 day average.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
- Miss Emerita
- Posts: 3443
- Joined: Sun Nov 04, 2018 8:07 pm
Re: AHI Target
Nice to see the improvement in flow limitations and hypopneas. You might now want to try EPR of 3. No need to change your pressure settings, I think. We can just see how it goes.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Bleep DreamPort CPAP Mask Solution |
Oscar software is available at https://www.sleepfiles.com/OSCAR/
Re: AHI Target
Thanks Miss Emerita! I shall move EPR to 3.
_________________
Machine: AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
ResMed AirSense 10 Autoset
P30i Mask
P30i Mask