OSCAR v1.2.0 is released 10/10/2020

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
BlueDragon
Posts: 541
Joined: Sun May 27, 2018 10:20 am
Location: Sonoran Desert

Re: OSCAR v1.2.0 is released 10/10/2020

Post by BlueDragon » Thu Nov 12, 2020 8:11 am

zorki1c wrote:
Wed Nov 11, 2020 8:31 pm
The old version worked fine (Win 10 Pro). The new version gives me s error code 5 Access denied
When does the error 5 occur? Are you using a new database and, if so, where is the database located?

I have never seen an error 5 before. I suggest you download a new copy from http://www.sleepfiles.com/OSCAR and install again. Maybe something was corrupted?

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: Brevida™ Nasal Pillow CPAP Mask with Headgear
Additional Comments: Dx Mar 2018 (AHI=24, RDI=54; AHI=73 supine). Started APAP June 2018, VAuto Aug 2020.
OSCAR 1.5.1 is the latest release.
OSCAR Team
ResMed AirCurve 10 VAuto, F&P Brevida.
FlashAir SD and FlashPap for data transfer.

User avatar
BlueDragon
Posts: 541
Joined: Sun May 27, 2018 10:20 am
Location: Sonoran Desert

Re: OSCAR v1.2.0 is released 10/10/2020

Post by BlueDragon » Thu Nov 12, 2020 8:16 am

mamazipp wrote:
Thu Nov 12, 2020 1:39 am
What is the procedure for updating Oscar on my IMAC.? Are there specific steps I need to take? Thanks in advance.
Nothing special -- just install the new version. Installation guide for MacOS is here.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: Brevida™ Nasal Pillow CPAP Mask with Headgear
Additional Comments: Dx Mar 2018 (AHI=24, RDI=54; AHI=73 supine). Started APAP June 2018, VAuto Aug 2020.
OSCAR 1.5.1 is the latest release.
OSCAR Team
ResMed AirCurve 10 VAuto, F&P Brevida.
FlashAir SD and FlashPap for data transfer.

User avatar
zorki1c
Posts: 253
Joined: Mon Jun 10, 2013 5:24 pm
Location: Intermountain West

Re: OSCAR v1.2.0 is released 10/10/2020

Post by zorki1c » Thu Nov 12, 2020 12:29 pm

My AVG antivirus program was blocking access because it didn't trust the Oscar program. Fixed it.

_________________
MachineMask
Additional Comments: Use the P30i in the cooler months and the P10 the rest of the time.

User avatar
QueSera
Posts: 141
Joined: Fri Jan 01, 2016 11:17 am
Location: in the NYC suburbs in New Jersey USA

Re: OSCAR v1.2.0 is released 10/10/2020

Post by QueSera » Tue Nov 24, 2020 3:33 pm

I apologize if this isn't the right place to post this.

Long story short, I'm trying to install OSCAR. My Mac laptop is very old (and would never run Sleepyhead), so I got an inexpensive Chromebook. Per the installation instructions, I checked to see what processor it has and I saw aarch64. Again, per instructions, I returned to the downloads page, but the installer I need, according to the installation instructions, isn't there.

Your original post on this thread listed changes and features in the recent update, including something about supporting amd processors only. So I'm thinking that the processor I have won't support the app I bought it for. This is unfortunate for me.

Any ideas how to make it work? I'll be looking into it as well, but it looks like you're the guy here who knows OSCAR.

Thanks for any help you can give me.
It's always something. Roseanne RoseannaDanna
I was a victim of a series of circumstances, as are we all. Malachi Constant

User avatar
Passport in-hand
Posts: 40
Joined: Tue Sep 26, 2017 6:43 am

Re: OSCAR v1.2.0 is released 10/10/2020

Post by Passport in-hand » Wed Nov 25, 2020 7:57 am

A Mac user here: I waited one month to download v1.2. Now that I had, everything 👍🏽. Tip: If you have a Mac, you might have to readjust your Settings/Security to download and install v1.2.
RESMED AIRCURVE 10 VAUTO
Nasal: Fisher and Paykel Eson 1
PAP user since 2014

User avatar
rdfry
Posts: 173
Joined: Sat Aug 21, 2010 11:59 am
Location: DFW

Re: OSCAR v1.2.0 is released 10/10/2020

Post by rdfry » Thu Nov 26, 2020 9:10 pm

Can you run Linux on it instead of Chrome OS?
Mask: bleep and F30i
Machine: Resmed S10 Autoset

User avatar
BlueDragon
Posts: 541
Joined: Sun May 27, 2018 10:20 am
Location: Sonoran Desert

Re: OSCAR v1.2.0 is released 10/10/2020

Post by BlueDragon » Thu Nov 26, 2020 9:20 pm

@QueSera: Sorry, at this time the released versions of OSCAR support only Chromebooks with AMD and Intel processors.

If you up to compiling the code yourself, you might try installing QT for ARM64 processors, download OSCAR source from the gitlab repository, and build OSCAR in the Linux mode.

@rdfty: the problem is the processor, not the OS. OSCAR runs under ChromeOS' linux beta but we currently supply compiled code only for AMD and Intel processors.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: Brevida™ Nasal Pillow CPAP Mask with Headgear
Additional Comments: Dx Mar 2018 (AHI=24, RDI=54; AHI=73 supine). Started APAP June 2018, VAuto Aug 2020.
OSCAR 1.5.1 is the latest release.
OSCAR Team
ResMed AirCurve 10 VAuto, F&P Brevida.
FlashAir SD and FlashPap for data transfer.

User avatar
QueSera
Posts: 141
Joined: Fri Jan 01, 2016 11:17 am
Location: in the NYC suburbs in New Jersey USA

Re: OSCAR v1.2.0 is released 10/10/2020

Post by QueSera » Thu Nov 26, 2020 9:33 pm

Thanks, all. I appreciate the work that volunteers put into OSCAR (and the now unsupported Sleepyhead.) it's very disappointing that the manufacturers don't care much about the end-user, since they market to doctors, not us. A cross-platform app that reads all the data should come standard with every machine.

I'm out of luck for now, then. I'll check back from time to time.
It's always something. Roseanne RoseannaDanna
I was a victim of a series of circumstances, as are we all. Malachi Constant

User avatar
rdfry
Posts: 173
Joined: Sat Aug 21, 2010 11:59 am
Location: DFW

Re: OSCAR v1.2.0 is released 10/10/2020

Post by rdfry » Thu Nov 26, 2020 10:42 pm

Thanks for letting me know that it is Cpu specific.
Mask: bleep and F30i
Machine: Resmed S10 Autoset

tisket
Posts: 198
Joined: Sat Apr 01, 2017 2:03 pm
Location: Florida

Re: OSCAR v1.2.0 is released 10/10/2020

Post by tisket » Sun Dec 06, 2020 8:36 am

Thanks to everyone involved with the Oscar project. I'm sure you know how important it is, but it doesn't hurt to be reminded once in a while. It's important! :D

Don't know what I'd do without it (and Sleepyhead before).
---------------------------------------------------
ResMed Airsense 10 Autoset, Aloha nasal pillow mask using HoseBuddy for overhead hose management, Nexcare paper tape for mouth

majt
Posts: 9
Joined: Thu Dec 10, 2015 11:32 am

Re: OSCAR v1.2.0 is released 10/10/2020

Post by majt » Mon Dec 07, 2020 12:44 pm

i can' download oscar to mac mac wont verify download

_________________
MachineMaskHumidifier

User avatar
BlueDragon
Posts: 541
Joined: Sun May 27, 2018 10:20 am
Location: Sonoran Desert

Re: OSCAR v1.2.0 is released 10/10/2020

Post by BlueDragon » Mon Dec 07, 2020 12:49 pm

majt wrote:
Mon Dec 07, 2020 12:44 pm
i can' download oscar to mac mac wont verify download
Try this from another user with this problem:
Control + Click should get you a context menu that opens (Right Click works for me also). From the context menu select Open. That should get OSCAR started. Then you may get a popup asking is you want to give OSCAR permission to access your files which you have to say yes too.
Also, take a look at the Mac installation Wiki for OSCAR at http://www.apneaboard.com/wiki/index.ph ... _Apple_Mac

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: Brevida™ Nasal Pillow CPAP Mask with Headgear
Additional Comments: Dx Mar 2018 (AHI=24, RDI=54; AHI=73 supine). Started APAP June 2018, VAuto Aug 2020.
OSCAR 1.5.1 is the latest release.
OSCAR Team
ResMed AirCurve 10 VAuto, F&P Brevida.
FlashAir SD and FlashPap for data transfer.

User avatar
Wildkat
Posts: 33
Joined: Fri Apr 19, 2013 10:40 am
Location: Bluefield WV

Re: OSCAR v1.2.0 is released 10/10/2020

Post by Wildkat » Fri Dec 11, 2020 1:01 am

I am trying to get OSCAR to work on my Linux laptop. I downloaded the one specifically for Linux. It will read from my cpap card but not my oximeter. It is a CMS50D+ (an older one) I choose the option (button) to download directly from device and choose my oximeter, but it can not recognize it. The link that says to look for the driver does not work. I think I found the driver on the Linux kernel site but have no clue how to install it in my laptop. (not even sure I should) Is there any advise you can give me to help me out?

I tried to send a PM to Bonjour but apparently I do not know how to work the PM's as it is just setting in the "outbox" an not actually sending.

ps - please do not tell me that you cannot download directly from the device (as one user has told me)..there would not (at least there shouldn't be) an option that specifically says to download directly from device if it was not possible

thanks in advance for any help

_________________
Mask: AirTouch™ F20 For Her Full Face CPAP Mask with Headgear
Additional Comments: pressure is at 8 to 20 / diagnosed with OSA in 1997 / also on oxygen 2 lpm at night only
Exercising would be so much more rewarding if calories screamed when you burned them!

User avatar
Pugsy
Posts: 63942
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: OSCAR v1.2.0 is released 10/10/2020

Post by Pugsy » Fri Dec 11, 2020 1:26 am

Wildkat wrote:
Fri Dec 11, 2020 1:01 am
I tried to send a PM to Bonjour but apparently I do not know how to work the PM's as it is just setting in the "outbox" an not actually sending.
Private messages will sit in your outbox until they are opened and read by the person you sent the PM to.
So the fact that it is still in your outbox just means that the person hasn't been here and read his PMs. Eventually he will and then it will move over to your sent box.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.

User avatar
Wildkat
Posts: 33
Joined: Fri Apr 19, 2013 10:40 am
Location: Bluefield WV

Re: OSCAR v1.2.0 is released 10/10/2020

Post by Wildkat » Fri Dec 11, 2020 11:14 am

Thank you Pugsy, it has been years since I used a forum so I had forgotten that.

_________________
Mask: AirTouch™ F20 For Her Full Face CPAP Mask with Headgear
Additional Comments: pressure is at 8 to 20 / diagnosed with OSA in 1997 / also on oxygen 2 lpm at night only
Exercising would be so much more rewarding if calories screamed when you burned them!