I have a resend air curve 10 v auto - several days ago I noticed my ahi went up and i turned up the pressure - the ahi went higher and the pressure does not feel the same - it has around 10k hours - is there a way to test it to see if it’s going bad. ? Any possible way to fix it?

Thanks

my leaks have been between 50-78 L/min per night - AHI last night registered 5 with a leak of 78, Whether that's "horrible" or "meh, not too bad" depends on what your pressures are, since you're using a Philps machine. Like Pugsy says, we need some data. https://www.cpaptalk.com/wiki/index.php/Osca...

Need to see the detailed report to be able to answer your questions reliably. It all depends on how deep into large leak territory you went. As to "how to fix it" question.....you have to figure out the cause of the big leaks. It's either mask movement or mouth opening and the solutions for either ...

ChicagoGranny wrote: ↑

Wed Sep 08, 2021 11:40 am

Doesn't sound good.

Which model mask are you using? Do you have dry mouth?

Go to youtube and watch four or five videos on fitting and adjusting your mask model?

ResMed AirFit N20 Nasal Mask -- no dry mouth ..

Been using the nasal mask below and cant get the Leaks under control, its a nasal mask and my leaks have been between 50-78 L/min per night - AHI last night registered 5 with a leak of 78, dont feel great today eyes kinda burning - my question is how much is this affecting my treatment? is the AHI #...

my mask is listed below, been having round 60# leak everynight -- i do wear breath strips to open nasal passages, any way to fix this or help?

This look ok? I’m not sure what ti max and ti min is ? Tx Don't change TiMin unless you know what you're doing, and have a good reason to do so, leave it at 0.7 seconds. feel free to increase TiMax unless you have some underlying lung disease that precludes that. The TiMin is set to standard 0.3 is...

This look ok? I’m not sure what ti max and ti min is ?

Tx

still trying to wrap my head around the differences in this machine and the resmed airsense auto - Just having a hard time understanding the difference would a good comparison be like using a machine on pressure 10 cpap mode and have a epr of 3 so the pressure out is 10 and exhale would be 7 equall...

Yes, there is a way to restore the settings to the factory defaults. As well as there is a way to erase any old patient data on the machine...don't forget to erase the SD card as well. Go here and get the clinical provider manual via email. https://www.apneaboard.com/adjust-cpap-pressure/change-cpa...

You posted just when I posted. Auto mode...7 minimum and 12 maximum.... did you ever hit the 12 max? I need Flex settings please to maybe come up with a PS number that is close. But so far... Auto bilevel mode Minimum EPAP will be around 7 Maximum IPAP will be 12 or neighborhood PS will depend on y...

if i use it on auto will it be exactly like the Dreamstation autoset? tx Not exactly but if you know your old settings and how to change this one - start there. I do pressure was 7-12 and it was set on automode - I just want to make sure using this new aircurve v-auto is safe or wont cause and unwa...

well i had to get rid of the Philips Dreamstation AUTO because of the recall, I was liking it and feeling better until that happened, I finally got another machine, the ResMed AirCurve 10 VAuto - can this machine be used in the same manner as the dreamstation? I do not have CSA to my knowledge and a...

Anyone have any updates from Philips or elsewhere regarding these machines?

Its not....be nice to know though if my machine is affected ///