High pressure alarm on my respironics ASV?

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
icipher
Posts: 304
Joined: Thu Oct 10, 2013 11:09 am

High pressure alarm on my respironics ASV?

Post by icipher » Mon Aug 22, 2016 8:39 am

Last night I woke up in severe panic. Happens every week. It's strange in that the second I am conscious I feel like I'm dying. No pain, just elevated heart rate and terrible fear.

This happened last night, but when I woke up I noticed a red light on my machine and when I toggled the wheel, there was a message that said "high pressure support". The machine would not let me turn it off, so I had to in plug it which then sounded an alarm.

Does anyone know what the high pressure alarm is indicative off? I tried looking at the manual but it's extremely vague.

Help, anyone?

klv329
Posts: 497
Joined: Mon Aug 31, 2015 6:43 pm
Location: Bradenton, Florida

Re: High pressure alarm on my respironics ASV?

Post by klv329 » Mon Aug 22, 2016 5:59 pm

No idea about the meaning of the alarm.

Perhaps an outside chance the machine is malfunctioning? Do you have a backup machine you can compare?

I had a 'panic wake up' experience a couple of times with a used ASV that was causing my inhalation time to increase and exhalation time to decrease. It was constantly increasing the inhalation pressure rather slowly then overshooting my inhalation time by a few tenths of a second. It also seemed to juggle against my breathing occasionally. After 3 nights with that thing I was in a sleepy fog and realized the machine was probably malfunctioning because this had never happened before.

Ditched that used ASV that I had just bought last week for my tried and proven (also used} ASV and all was well again.

_________________
Machine: ResMed AirCurve 10 ASV Machine with Heated Humidifier
Additional Comments: Resmed Aircurve 10 ASVAUTO Min Epap 10.4, Max Epap 11.6, PS 1.6-12.0

JDS74
Posts: 3397
Joined: Sun Jan 23, 2011 2:57 pm
Location: South Carolina

Re: High pressure alarm on my respironics ASV?

Post by JDS74 » Tue Aug 23, 2016 6:41 am

From the manual:
High Pressure Alarm:
This may be caused by a malfunctioning device. Press the Alarm Silence/Indicator button to silence the alarm. Remove your mask Remove power from the device. Restore power. If the alarm continues, contact your home care provider for service.

_________________
Mask: Oracle HC452 Oral CPAP Mask
Humidifier: DreamStation Heated Humidifier
Additional Comments: EverFlo Q 3.0 Liters O2 PR DSX900 ASV
Oracle 452 Lessons Learned Updated
DSX900 AutoSV with HC150 extra humidifier and Hibernite heated hose
Settings: EPAP Min-10.0, EPAP Max-17, PS Min-3, PS Max-10, Max Pressure-20, Rate-Auto, Biflex-1.
Sleepyhead and Encore Pro 2.21.

icipher
Posts: 304
Joined: Thu Oct 10, 2013 11:09 am

Re: High pressure alarm on my respironics ASV?

Post by icipher » Tue Aug 23, 2016 8:48 am

I was able to find that this alarm can indicate a malfunctioning machine. I used it last night with no issue. I'd still love to know what caused it to come on the other night, though.

klv329
Posts: 497
Joined: Mon Aug 31, 2015 6:43 pm
Location: Bradenton, Florida

Re: High pressure alarm on my respironics ASV?

Post by klv329 » Tue Aug 23, 2016 5:29 pm

If those panic wakeups are caused by a defective ASV you might want to get a different machine.

My panic wake up was a shocker the likes of which I haven't experienced in decades. I'm not sure how many of those I could survive.

_________________
Machine: ResMed AirCurve 10 ASV Machine with Heated Humidifier
Additional Comments: Resmed Aircurve 10 ASVAUTO Min Epap 10.4, Max Epap 11.6, PS 1.6-12.0